<?php
/*
  Copyright (c) 2007-2011, Till Brehm, projektfarm Gmbh
  All rights reserved.

  Redistribution and use in source and binary forms, with or without modification,
  are permitted provided that the following conditions are met:

 * Redistributions of source code must retain the above copyright notice,
  this list of conditions and the following disclaimer.
 * Redistributions in binary form must reproduce the above copyright notice,
  this list of conditions and the following disclaimer in the documentation
  and/or other materials provided with the distribution.
 * Neither the name of ISPConfig nor the names of its contributors
  may be used to endorse or promote products derived from this software without
  specific prior written permission.

  THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
  ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
  WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
  IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT,
  INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
  BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
  DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY
  OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
  NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
  EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
 */

define('SCRIPT_PATH', dirname($_SERVER["SCRIPT_FILENAME"]));
require SCRIPT_PATH."/lib/config.inc.php";

// Check whether another instance of this script is already running
if (is_file($conf['temppath'] . $conf['fs_div'] . '.ispconfig_lock')) {
	clearstatcache();
	$pid = trim(file_get_contents($conf['temppath'] . $conf['fs_div'] . '.ispconfig_lock'));
	if(preg_match('/^[0-9]+$/', $pid)) {
		if(file_exists('/proc/' . $pid)) {
			print @date('d.m.Y-H:i').' - WARNING - There is already an instance of server.php running with pid ' . $pid . '.' . "\n";
			exit;
		}
	}
	print @date('d.m.Y-H:i').' - WARNING - There is already a lockfile set, but no process running with this pid (' . $pid . '). Continuing.' . "\n";
}

// Set Lockfile
@file_put_contents($conf['temppath'] . $conf['fs_div'] . '.ispconfig_lock', getmypid());

if($conf['log_priority'] <= LOGLEVEL_DEBUG) print 'Set Lock: ' . $conf['temppath'] . $conf['fs_div'] . '.ispconfig_lock' . "\n";

require SCRIPT_PATH."/lib/app.inc.php";

$app->setCaller('server');

set_time_limit(0);
ini_set('error_reporting', E_ALL & ~E_NOTICE);

// make sure server_id is always an int
$conf['server_id'] = intval($conf['server_id']);

/*
 * Try to Load the server configuration from the master-db
 */
if ($app->dbmaster->testConnection()) {
	$server_db_record = $app->dbmaster->queryOneRecord("SELECT * FROM server WHERE server_id = ?", $conf['server_id']);

	if(!is_array($server_db_record)) die('Unable to load the server configuration from database.');

	//* Get the number of the last processed datalog_id, if the id of the local server
	//* is > then the one of the remote system, then use the local ID as we might not have
	//* reached the remote server during the last run then.
	$local_server_db_record = $app->db->queryOneRecord("SELECT * FROM server WHERE server_id = ?", $conf['server_id']);
	$conf['last_datalog_id'] = (int) max($server_db_record['updated'], $local_server_db_record['updated']);
	unset($local_server_db_record);

	$conf['mirror_server_id'] = (int) $server_db_record['mirror_server_id'];

	// Load the ini_parser
	$app->uses('ini_parser');

	// Get server configuration
	$conf['serverconfig'] = $app->ini_parser->parse_ini_string(stripslashes($server_db_record['config']));

	// Set the loglevel
	$conf['log_priority'] = intval($conf['serverconfig']['server']['loglevel']);

	// Set level from which admin should be notified by email
	if(!isset($conf['serverconfig']['server']['admin_notify_events']) || $conf['serverconfig']['server']['admin_notify_events'] == '') $conf['serverconfig']['server']['admin_notify_events'] = 3;
	$conf['admin_notify_priority'] = intval($conf['serverconfig']['server']['admin_notify_events']);

	// we do not need this variable anymore
	unset($server_db_record);

	// retrieve admin email address for notifications
	$sys_ini = $app->db->queryOneRecord("SELECT * FROM sys_ini WHERE sysini_id = 1");
	$conf['sys_ini'] = $app->ini_parser->parse_ini_string(stripslashes($sys_ini['config']));
	$conf['admin_mail'] = $conf['sys_ini']['mail']['admin_mail'];
	unset($sys_ini);

	/*
	 * Save the rescue-config, maybe we need it (because the database is down)
	 */
	$tmp['serverconfig']['server']['loglevel'] = $conf['log_priority'];
	$tmp['serverconfig']['rescue'] = $conf['serverconfig']['rescue'];
	file_put_contents(dirname(__FILE__) . "/temp/rescue_module_serverconfig.ser.txt", serialize($tmp));
	unset($tmp);

	// protect the file
	chmod(dirname(__FILE__) . "/temp/rescue_module_serverconfig.ser.txt", 0600);

} else {
	/*
	 * The master-db is not available.
	 * Problem: because we need to start the rescue-module (to rescue the DB if this IS the
	 * server, the master-db is running at) we have to initialize some config...
	 */

	/*
	 * If there is a temp-file with the data we could get from the database, then we use it
	 */
	$tmp = array();
	if (file_exists(dirname(__FILE__) . "/temp/rescue_module_serverconfig.ser.txt")){
		$tmp = unserialize(file_get_contents(dirname(__FILE__) . "/temp/rescue_module_serverconfig.ser.txt"));
	}

	// maxint at 32 and 64 bit systems
	$conf['last_datalog_id'] = intval('9223372036854775807');

	// no mirror
	$conf['mirror_server_id'] = 0;

	// Set the loglevel
	$conf['log_priority'] = (isset($tmp['serverconfig']['server']['loglevel']))? $tmp['serverconfig']['server']['loglevel'] : LOGLEVEL_ERROR;
	/*
	 * Set the configuration to rescue the database
	 */
	if (isset($tmp['serverconfig']['rescue'])){
		$conf['serverconfig']['rescue'] = $tmp['serverconfig']['rescue'];
	}
	else{
		$conf['serverconfig']['rescue']['try_rescue'] = 'n';
	}
	// we do not need this variable anymore
	unset($tmp);
}

/** Do we need to start the core-modules */


$needStartCore = true;

/*
 * Next we try to process the datalog
 */
if ($app->db->testConnection() && $app->dbmaster->testConnection()) {

	// Check if there is anything to update
	if ($conf['mirror_server_id'] > 0) {
		$tmp_rec = $app->dbmaster->queryOneRecord("SELECT count(server_id) as number from sys_datalog WHERE datalog_id > ? AND (server_id = ? OR server_id = ? OR server_id = 0)", $conf['last_datalog_id'], $conf['server_id'], $conf['mirror_server_id']);
	} else {
		$tmp_rec = $app->dbmaster->queryOneRecord("SELECT count(server_id) as number from sys_datalog WHERE datalog_id > ? AND (server_id = ? OR server_id = 0)", $conf['last_datalog_id'], $conf['server_id']);
	}

	$tmp_num_records = $tmp_rec['number'];
	unset($tmp_rec);

	//** Load required base-classes
	$app->uses('modules,plugins,file,services,system');
	//** Load the modules that are in the mods-enabled folder
	$app->modules->loadModules('all');
	//** Load the plugins that are in the plugins-enabled folder
	$app->plugins->loadPlugins('all');
	
	$app->plugins->raiseAction('server_plugins_loaded', '');
	
	if ($tmp_num_records > 0) {
		$app->log("Found $tmp_num_records changes, starting update process.", LOGLEVEL_DEBUG);
		//** Go through the sys_datalog table and call the processing functions
		//** from the modules that are hooked on to the table actions
		$app->modules->processDatalog();
	}
	//** Process actions from sys_remoteaction table
	$app->modules->processActions();
	//** Restart services that need to after configuration
	$app->services->processDelayedActions();
	//** All modules are already loaded and processed, so there is NO NEED to load the core once again...
	$needStartCore = false;

} else {
	if (!$app->db->connect->testConnection()) {
		$app->log('Unable to connect to local server.' . $app->db->errorMessage, LOGLEVEL_WARN);
	} else {
		$app->log('Unable to connect to master server.' . $app->dbmaster->errorMessage, LOGLEVEL_WARN);
	}
}

/*
 * Under normal circumstances the system was loaded and all updates are done.
 * but if we do not have to update anything or if the database is not accessible, then we
 * have to start the core-system (if the database is accessible, we need the core because of the
 * monitoring. If the databse is NOT accessible, we need the core because of rescue the db...
 */
if ($needStartCore) {
	// Write the log
	$app->log('No Updated records found, starting only the core.', LOGLEVEL_DEBUG);
	// Load required base-classes
	$app->uses('modules,plugins,file,services');
	// Load the modules that are im the mods-core folder
	$app->modules->loadModules('core');
	// Load the plugins that are in the f folder
	//$app->plugins->loadPlugins('core');
}


// Remove lock
@unlink($conf['temppath'] . $conf['fs_div'] . '.ispconfig_lock');
$app->log('Remove Lock: ' . $conf['temppath'] . $conf['fs_div'] . '.ispconfig_lock', LOGLEVEL_DEBUG);


die("finished.\n");
?>