Commit 532ae591 authored by latham's avatar latham

Remove DOS line returns lathama

parent 4e7e4c3c
Installation
-----------
It is recommended to use a clean (fresh) Fedora install. Then follow the steps below to setup your server with ISPConfig 3:
Installation of some basic requirements:
rpm --import /etc/pki/rpm-gpg/RPM-GPG-KEY*
yum update
yum groupinstall 'Development Tools'
yum groupinstall 'Development Libraries'
You should disable selinux now, as some programs will not start when selinux is enabled:
vi /etc/selinux/config
and set:
SELINUX=disabled
then reboot the server.
1) Install Postfix, Courier, Saslauthd, MySQL, phpMyAdmin with the following command line (on one line!):
yum install ntp httpd mysql-server php php-mysql php-mbstring rpm-build gcc mysql-devel openssl-devel cyrus-sasl-devel pkgconfig zlib-devel phpMyAdmin pcre-devel openldap-devel postgresql-devel expect libtool-ltdl-devel openldap-servers libtool gdbm-devel pam-devel gamin-devel getmail
useradd -m -s /bin/bash compileuser
passwd compileuser
visudo
## Allow root to run any commands anywhere
root ALL=(ALL) ALL
compileuser ALL=(ALL) ALL
su compileuser
mkdir $HOME/rpm
mkdir $HOME/rpm/SOURCES
mkdir $HOME/rpm/SPECS
mkdir $HOME/rpm/BUILD
mkdir $HOME/rpm/SRPMS
mkdir $HOME/rpm/RPMS
mkdir $HOME/rpm/RPMS/i386
echo "%_topdir $HOME/rpm" >> $HOME/.rpmmacros
wget http://prdownloads.sourceforge.net/courier/courier-authlib-0.61.0.tar.bz2
wget http://prdownloads.sourceforge.net/courier/courier-imap-4.4.1.tar.bz2
wget http://prdownloads.sourceforge.net/courier/maildrop-2.0.4.tar.bz2
sudo rpmbuild -ta courier-authlib-0.61.0.tar.bz2
sudo rpm -ivh /home/compileuser/rpm/RPMS/i386/courier-authlib-0.61.0-1.fc9.i386.rpm
sudo rpm -ivh /home/compileuser/rpm/RPMS/i386/courier-authlib-mysql-0.61.0-1.fc9.i386.rpm
sudo rpm -ivh /home/compileuser/rpm/RPMS/i386/courier-authlib-devel-0.61.0-1.fc9.i386.rpm
rpmbuild -ta courier-imap-4.4.1.tar.bz2
sudo rpm -ivh /home/compileuser/rpm/RPMS/i386/courier-imap-4.4.1-1.9.i386.rpm
sudo rpmbuild -ta maildrop-2.0.4.tar.bz2
sudo rpm -ivh /home/compileuser/rpm/RPMS/i386/maildrop-2.0.4-1.9.i386.rpm
exit
yum install postfix
chkconfig --levels 235 mysqld on
/etc/init.d/mysqld start
chkconfig --levels 235 httpd on
/etc/init.d/httpd start
chkconfig --levels 235 courier-authlib on
/etc/init.d/courier-authlib start
chkconfig --levels 235 sendmail off
chkconfig --levels 235 postfix on
chkconfig --levels 235 saslauthd on
/etc/init.d/sendmail stop
/etc/init.d/postfix start
/etc/init.d/saslauthd start
chkconfig --levels 235 courier-imap on
/etc/init.d/courier-authlib restart
/etc/init.d/courier-imap restart
Set the mysql database password:
mysqladmin -u root password yourrootsqlpassword
mysqladmin -h ispconfig.local -u root password yourrootsqlpassword
2) Install Amavisd-new, Spamassassin and Clamav (1 line!):
yum install amavisd-new spamassassin clamav clamav-data clamav-server clamav-update unzip bzip2 unrar
chkconfig --levels 235 amavisd on
chkconfig --levels 235 clamd.amavisd on
/usr/bin/freshclam
/etc/init.d/amavisd start
/etc/init.d/clamd.amavisd start
3) Install apache, PHP5 and phpmyadmin (1 line!):
yum install php php-devel php-gd php-imap php-ldap php-mysql php-odbc php-pear php-xml php-xmlrpc php-eaccelerator php-magickwand php-magpierss php-mapserver php-mbstring php-mcrypt php-mhash php-mssql php-shout php-snmp php-soap php-tidy curl curl-devel perl-libwww-perl ImageMagick libxml2 libxml2-devel phpmyadmin
4) Install pure-ftpd and quota
yum install pure-ftpd quota
chkconfig --levels 235 pure-ftpd on
5) Install mydns
rpm -i http://mydns.bboy.net/download/mydns-mysql-1.1.0-1.i386.rpm
chkconfig --levels 235 mydns on
6) Install vlogger and webalizer
yum install webalizer perl-DateTime-Format-HTTP perl-DateTime-Format-Builder
cd /tmp
wget http://n0rp.chemlab.org/vlogger/vlogger-1.3.tar.gz
tar xvfz vlogger-1.3.tar.gz
mv vlogger-1.3/vlogger /usr/sbin/
rm -rf vlogger*
7) Configure the firewall
Now you should switch off the firewall by running:
system-config-firewall-tui
ISPConfig comes with a iptables bsed firewall script that can be meneged from within the ispconfig interface.
8) Install ISPConfig 3
There are two possile scenarios, but not both:
8.1) Install the latest released version
8.2) Install directly from SVN
8.1) Installation of beta 3 from tar.gz
cd /tmp
wget http://www.ispconfig.org/downloads/ISPConfig-3.0.0.9-rc2.tar.gz
tar xvfz ISPConfig-3.0.0.9-rc2.tar.gz
cd ispconfig3_install/install/
8.2) Installation from SVN
yum install subversion
cd /tmp
svn export svn://svn.ispconfig.org/ispconfig3/trunk/
cd trunk/install
8.1+8.2) Now proceed with the ISPConfig installation.
Now start the installation process by executing:
php -q install.php
The installer will configure all services like postfix, sasl, courier, etc. for you. A manual setup as required for ISPConfig 2 (perfect setup guides) is not necessary. To login to the ISPConfig controlpanel, open the following URL in your browser (replace the IP to match your settings!):
http://192.168.0.100:8080/
the default login is:
user: admin
password: admin
In case you get a permission denied error from apache, please restart the apache webserver process.
Optional:
Install a webbased Email Client
yum install squirrelmail
----------------------------------------------------------------------------------------------------------
Hints:
debian 4.0 under openvz:
VPSID=101
for CAP in CHOWN DAC_READ_SEARCH SETGID SETUID NET_BIND_SERVICE NET_ADMIN SYS_CHROOT SYS_NICE CHOWN DAC_READ_SEARCH SETGID SETUID NET_BIND_SERVICE NET_ADMIN SYS_CHROOT SYS_NICE
do
vzctl set $VPSID --capability ${CAP}:on --save
done
----------------------------------------------------------------------------------------------------------
Installing Jailkit:
cd /tmp
wget http://olivier.sessink.nl/jailkit/jailkit-2.5.tar.gz
tar xvfz jailkit-2.5.tar.gz
cd jailkit-2.5
./configure
make
make install
rm -rf jailkit-2.5*
Installation
-----------
It is recommended to use a clean (fresh) Fedora install. Then follow the steps below to setup your server with ISPConfig 3:
Installation of some basic requirements:
rpm --import /etc/pki/rpm-gpg/RPM-GPG-KEY*
yum update
yum groupinstall 'Development Tools'
yum groupinstall 'Development Libraries'
You should disable selinux now, as some programs will not start when selinux is enabled:
vi /etc/selinux/config
and set:
SELINUX=disabled
then reboot the server.
1) Install Postfix, Courier, Saslauthd, MySQL, phpMyAdmin with the following command line (on one line!):
yum install ntp httpd mysql-server php php-mysql php-mbstring rpm-build gcc mysql-devel openssl-devel cyrus-sasl-devel pkgconfig zlib-devel phpMyAdmin pcre-devel openldap-devel postgresql-devel expect libtool-ltdl-devel openldap-servers libtool gdbm-devel pam-devel gamin-devel getmail
useradd -m -s /bin/bash compileuser
passwd compileuser
visudo
## Allow root to run any commands anywhere
root ALL=(ALL) ALL
compileuser ALL=(ALL) ALL
su compileuser
mkdir $HOME/rpm
mkdir $HOME/rpm/SOURCES
mkdir $HOME/rpm/SPECS
mkdir $HOME/rpm/BUILD
mkdir $HOME/rpm/SRPMS
mkdir $HOME/rpm/RPMS
mkdir $HOME/rpm/RPMS/i386
echo "%_topdir $HOME/rpm" >> $HOME/.rpmmacros
wget http://prdownloads.sourceforge.net/courier/courier-authlib-0.61.0.tar.bz2
wget http://prdownloads.sourceforge.net/courier/courier-imap-4.4.1.tar.bz2
wget http://prdownloads.sourceforge.net/courier/maildrop-2.0.4.tar.bz2
sudo rpmbuild -ta courier-authlib-0.61.0.tar.bz2
sudo rpm -ivh /home/compileuser/rpm/RPMS/i386/courier-authlib-0.61.0-1.fc9.i386.rpm
sudo rpm -ivh /home/compileuser/rpm/RPMS/i386/courier-authlib-mysql-0.61.0-1.fc9.i386.rpm
sudo rpm -ivh /home/compileuser/rpm/RPMS/i386/courier-authlib-devel-0.61.0-1.fc9.i386.rpm
rpmbuild -ta courier-imap-4.4.1.tar.bz2
sudo rpm -ivh /home/compileuser/rpm/RPMS/i386/courier-imap-4.4.1-1.9.i386.rpm
sudo rpmbuild -ta maildrop-2.0.4.tar.bz2
sudo rpm -ivh /home/compileuser/rpm/RPMS/i386/maildrop-2.0.4-1.9.i386.rpm
exit
yum install postfix
chkconfig --levels 235 mysqld on
/etc/init.d/mysqld start
chkconfig --levels 235 httpd on
/etc/init.d/httpd start
chkconfig --levels 235 courier-authlib on
/etc/init.d/courier-authlib start
chkconfig --levels 235 sendmail off
chkconfig --levels 235 postfix on
chkconfig --levels 235 saslauthd on
/etc/init.d/sendmail stop
/etc/init.d/postfix start
/etc/init.d/saslauthd start
chkconfig --levels 235 courier-imap on
/etc/init.d/courier-authlib restart
/etc/init.d/courier-imap restart
Set the mysql database password:
mysqladmin -u root password yourrootsqlpassword
mysqladmin -h ispconfig.local -u root password yourrootsqlpassword
2) Install Amavisd-new, Spamassassin and Clamav (1 line!):
yum install amavisd-new spamassassin clamav clamav-data clamav-server clamav-update unzip bzip2 unrar
chkconfig --levels 235 amavisd on
chkconfig --levels 235 clamd.amavisd on
/usr/bin/freshclam
/etc/init.d/amavisd start
/etc/init.d/clamd.amavisd start
3) Install apache, PHP5 and phpmyadmin (1 line!):
yum install php php-devel php-gd php-imap php-ldap php-mysql php-odbc php-pear php-xml php-xmlrpc php-eaccelerator php-magickwand php-magpierss php-mapserver php-mbstring php-mcrypt php-mhash php-mssql php-shout php-snmp php-soap php-tidy curl curl-devel perl-libwww-perl ImageMagick libxml2 libxml2-devel phpmyadmin
4) Install pure-ftpd and quota
yum install pure-ftpd quota
chkconfig --levels 235 pure-ftpd on
5) Install mydns
rpm -i http://mydns.bboy.net/download/mydns-mysql-1.1.0-1.i386.rpm
chkconfig --levels 235 mydns on
6) Install vlogger and webalizer
yum install webalizer perl-DateTime-Format-HTTP perl-DateTime-Format-Builder
cd /tmp
wget http://n0rp.chemlab.org/vlogger/vlogger-1.3.tar.gz
tar xvfz vlogger-1.3.tar.gz
mv vlogger-1.3/vlogger /usr/sbin/
rm -rf vlogger*
7) Configure the firewall
Now you should switch off the firewall by running:
system-config-firewall-tui
ISPConfig comes with a iptables bsed firewall script that can be meneged from within the ispconfig interface.
8) Install ISPConfig 3
There are two possile scenarios, but not both:
8.1) Install the latest released version
8.2) Install directly from SVN
8.1) Installation of beta 3 from tar.gz
cd /tmp
wget http://www.ispconfig.org/downloads/ISPConfig-3.0.0.9-rc2.tar.gz
tar xvfz ISPConfig-3.0.0.9-rc2.tar.gz
cd ispconfig3_install/install/
8.2) Installation from SVN
yum install subversion
cd /tmp
svn export svn://svn.ispconfig.org/ispconfig3/trunk/
cd trunk/install
8.1+8.2) Now proceed with the ISPConfig installation.
Now start the installation process by executing:
php -q install.php
The installer will configure all services like postfix, sasl, courier, etc. for you. A manual setup as required for ISPConfig 2 (perfect setup guides) is not necessary. To login to the ISPConfig controlpanel, open the following URL in your browser (replace the IP to match your settings!):
http://192.168.0.100:8080/
the default login is:
user: admin
password: admin
In case you get a permission denied error from apache, please restart the apache webserver process.
Optional:
Install a webbased Email Client
yum install squirrelmail
----------------------------------------------------------------------------------------------------------
Hints:
debian 4.0 under openvz:
VPSID=101
for CAP in CHOWN DAC_READ_SEARCH SETGID SETUID NET_BIND_SERVICE NET_ADMIN SYS_CHROOT SYS_NICE CHOWN DAC_READ_SEARCH SETGID SETUID NET_BIND_SERVICE NET_ADMIN SYS_CHROOT SYS_NICE
do
vzctl set $VPSID --capability ${CAP}:on --save
done
----------------------------------------------------------------------------------------------------------
Installing Jailkit:
cd /tmp
wget http://olivier.sessink.nl/jailkit/jailkit-2.5.tar.gz
tar xvfz jailkit-2.5.tar.gz
cd jailkit-2.5
./configure
make
make install
rm -rf jailkit-2.5*
Installation
-----------
It is recommended to use a clean (fresh) OpenSUSE installatiom where you selected to install just the minimal packages. A Gnome or KDE desktop is not needed and will just slow down the server. Then follow the steps below to setup your server with ISPConfig 3:
Install some basic packes and the compilers that we need later
yast2 -i findutils readline libgcc glibc-devel findutils-locate gcc flex lynx compat-readline4 db-devel wget gcc-c++ make vim telnet cron iptables iputils man man-pages
1) Install Postfix, Courier, Saslauthd, MySQL, phpMyAdmin with the following command line (on one line!):
yast2 -i postfix postfix-mysql mysql mysql-client phpMyAdmin courier-imap courier-authlib courier-authlib-mysql python cron cyrus-sasl cyrus-sasl-crammd5 cyrus-sasl-digestmd5 cyrus-sasl-gssapi cyrus-sasl-otp cyrus-sasl-plain cyrus-sasl-saslauthd libmysqlclient-devel
chkconfig --add mysql
/etc/init.d/mysql start
chkconfig --add postfix
/etc/init.d/postfix start
chkconfig --add saslauthd
/etc/init.d/saslauthd start
chkconfig --add saslauthd
/etc/init.d/saslauthd start
chkconfig --add fam
chkconfig --add courier-authdaemon
chkconfig --add courier-pop
chkconfig --add courier-imap
/etc/init.d/courier-pop start
/etc/init.d/courier-imap start
chkconfig --add courier-pop-ssl
chkconfig --add courier-imap-ssl
/etc/init.d/courier-pop-ssl start
/etc/init.d/courier-imap-ssl start
cd /tmp
wget http://download.opensuse.org/repositories/server:/mail/openSUSE_11.0/i586/getmail-4.7.6-1.4.i586.rpm
rpm -i getmail-4.7.6-1.4.i586.rpm
// Warnings like "warning: getmail-4.7.6-1.4.i586.rpm: Header V3 DSA signature: NOKEY, key ID 367fe7fc" can be ignored.
// Install maildrop
rpm --force -i http://download.opensuse.org/repositories/home%3A/cboltz/openSUSE_10.3/i586/maildrop-2.0.3-16.1.i586.rpm
// Install pam_mysql
yast2 -i pam-devel
cd /tmp
wget http://heanet.dl.sourceforge.net/sourceforge/pam-mysql/pam_mysql-0.7RC1.tar.gz
tar xvfz pam_mysql-0.7RC1.tar.gz
cd pam_mysql-0.7RC1
./configure
make
make install
rm -rf pam_mysql-0.7RC1
rm pam_mysql-0.7RC1.tar.gz
// Set the mysql database password:
mysqladmin -u root password yourrootsqlpassword
mysqladmin -h ispconfig.local -u root password yourrootsqlpassword
2) Install Amavisd-new, Spamassassin and Clamav (1 line!):
yast2 -i amavisd-new clamav clamav-db zoo unzip unrar bzip2 unarj perl-DBD-mysql
chkconfig --add amavis
chkconfig --add clamd
/etc/init.d/amavis start
/etc/init.d/clamd start
3) Install PHP5 modules (1 line!):
yast2 -i php5-bcmath php5-bz2 php5-calendar php5-ctype php5-curl php5-dbase php5-dom php5-ftp php5-gd php5-gettext php5-gmp php5-iconv php5-imap php5-ldap php5-mbstring php5-mcrypt php5-mysql php5-ncurses php5-odbc php5-openssl php5-pcntl php5-pgsql php5-posix php5-shmop php5-snmp php5-soap php5-sockets php5-sqlite php5-sysvsem php5-tokenizer php5-wddx php5-xmlrpc php5-xsl php5-zlib php5-exif php5-fastcgi php5-pear php5-sysvmsg php5-sysvshm ImageMagick curl
Then run the following to enable the Apache modules:
a2enmod suexec
a2enmod rewrite
a2enmod ssl
a2enmod actions
chkconfig --add apache2
/etc/init.d/apache2 start
4) Install pure-ftpd and quota
yast2 -i pure-ftpd quota
// The current pure-ftpd package from SuSE is unstable and segfaults when a file is uploaded,
// we will replace it with a manually compiled package now:
cd /tmp
wget http://download.pureftpd.org/pub/pure-ftpd/releases/pure-ftpd-1.0.21.tar.gz
tar xvfz pure-ftpd-1.0.21.tar.gz
cd pure-ftpd-1.0.21/
./configure --sysconfdir=/etc/pure-ftpd --with-everything --with-mysql
make
make install
mv /usr/sbin/pure-ftpd /usr/sbin/pure-ftpd.suse
ln -s /usr/local/sbin/pure-ftpd /usr/sbin/pure-ftpd
rm -rf pure-ftpd-1.0.21
rm -f pure-ftpd-1.0.21.tar.gz
chkconfig --add pure-ftpd
/etc/init.d/pure-ftpd start
5) Install mydns
cd /tmp
wget ftp://ftp.pbone.net/mirror/ftp5.gwdg.de/pub/opensuse/repositories/server:/dns/SUSE_Factory/i586/mydns-mysql-1.1.0-3.72.i586.rpm
wget ftp://ftp.pbone.net/mirror/ftp5.gwdg.de/pub/opensuse/repositories/server:/dns/SUSE_Factory/i586/mydns-1.1.0-3.72.i586.rpm
rpm -i mydns*.rpm
rm -rf /tmp/mydns*
chkconfig --add mydns
6) Install vlogger and webalizer
cd /tmp
wget http://n0rp.chemlab.org/vlogger/vlogger-1.3.tar.gz
tar xvfz vlogger-1.3.tar.gz
mv vlogger-1.3/vlogger /usr/sbin/
rm -rf vlogger*
yast2 -i webalizer perl-DateManip
7) Install ISPConfig 3
There are two possile scenarios, but not both:
7.1) Install the latest released version
7.2) Install directly from SVN
7.1) Installation of beta 3 from tar.gz
cd /tmp
wget http://www.ispconfig.org/downloads/ISPConfig-3.0.0.9-rc2.tar.gz
tar xvfz ISPConfig-3.0.0.9-rc2.tar.gz
cd ispconfig3_install/install/
7.2) Installation from SVN
yast2 -i subversion
cd /tmp
svn export svn://svn.ispconfig.org/ispconfig3/trunk/
cd trunk/install
7.1+7.2) Now proceed with the ISPConfig installation.
Now start the installation process by executing:
php -q install.php
The installer will configure all services like postfix, sasl, courier, etc. for you. A manual setup as required for ISPConfig 2 (perfect setup guides) is not necessary. To login to the ISPConfig controlpanel, open the following URL in your browser (replace the IP to match your settings!):
http://192.168.0.100:8080/
the default login is:
user: admin
password: admin
In case you get a permission denied error from apache, please restart the apache webserver process.
Optional:
Install a webbased Email Client
yast2 -i squirrelmail
----------------------------------------------------------------------------------------------------------
Hints:
debian 4.0 under openvz:
VPSID=101
for CAP in CHOWN DAC_READ_SEARCH SETGID SETUID NET_BIND_SERVICE NET_ADMIN SYS_CHROOT SYS_NICE CHOWN DAC_READ_SEARCH SETGID SETUID NET_BIND_SERVICE NET_ADMIN SYS_CHROOT SYS_NICE
do
vzctl set $VPSID --capability ${CAP}:on --save
done
----------------------------------------------------------------------------------------------------------
Installing Jailkit:
cd /tmp
wget http://olivier.sessink.nl/jailkit/jailkit-2.5.tar.gz
tar xvfz jailkit-2.5.tar.gz
cd jailkit-2.5
./configure
make
make install
rm -rf jailkit-2.5*
Installation
-----------
It is recommended to use a clean (fresh) OpenSUSE installatiom where you selected to install just the minimal packages. A Gnome or KDE desktop is not needed and will just slow down the server. Then follow the steps below to setup your server with ISPConfig 3:
Install some basic packes and the compilers that we need later
yast2 -i findutils readline libgcc glibc-devel findutils-locate gcc flex lynx compat-readline4 db-devel wget gcc-c++ make vim telnet cron iptables iputils man man-pages
1) Install Postfix, Courier, Saslauthd, MySQL, phpMyAdmin with the following command line (on one line!):
yast2 -i postfix postfix-mysql mysql mysql-client phpMyAdmin courier-imap courier-authlib courier-authlib-mysql python cron cyrus-sasl cyrus-sasl-crammd5 cyrus-sasl-digestmd5 cyrus-sasl-gssapi cyrus-sasl-otp cyrus-sasl-plain cyrus-sasl-saslauthd libmysqlclient-devel
chkconfig --add mysql
/etc/init.d/mysql start
chkconfig --add postfix
/etc/init.d/postfix start
chkconfig --add saslauthd
/etc/init.d/saslauthd start
chkconfig --add saslauthd
/etc/init.d/saslauthd start
chkconfig --add fam
chkconfig --add courier-authdaemon