Skip to content

GitLab

Commit 18148bda authored by Till Brehm's avatar Till Brehm
Browse files

Removed outdated installation instructions.

parent 52983de5
Hide whitespace changes
Inline Side-by-side
docs/INSTALL.txt 0 → 100644
View file @ 18148bda
The installation instructions for ISPConfig can be found here:
http://www.ispconfig.org/page/en/documentation.html
docs/INSTALL_CENTOS_5.2.txt deleted 100644 → 0
View file @ 52983de5
WARNING: Support for CentOS is experimental only. For production systems better use Debian or Ubuntu.
Installation
-----------
It is recommended to use a clean (fresh) CentOS 5.2 install. Then follow the steps below to setup your server with ISPConfig 3:
Installation of some basic requirements:
rpm --import /etc/pki/rpm-gpg/RPM-GPG-KEY*
yum update
yum groupinstall 'Development Tools'
yum groupinstall 'Development Libraries'
You should disable selinux now, as some programs will not start when selinux is enabled:
system-config-securitylevel-tui
then reboot the server.
1) Install Postfix, Courier, Saslauthd, MySQL, phpMyAdmin with the following command line (on one line!):
yum install ntp httpd mysql-server php php-mysql php-mbstring rpm-build gcc mysql-devel openssl-devel cyrus-sasl-devel pkgconfig zlib-devel phpMyAdmin pcre-devel openldap-devel postgresql-devel expect libtool-ltdl-devel openldap-servers libtool gdbm-devel pam-devel gamin-devel postfix
rpm --import http://dag.wieers.com/rpm/packages/RPM-GPG-KEY.dag.txt
cd /tmp
wget http://packages.sw.be/rpmforge-release/rpmforge-release-0.3.6-1.el5.rf.i386.rpm
rpm -i rpmforge-release-0.3.6-1.el5.rf.i386.rpm
yum update
yum install getmail
useradd -m -s /bin/bash compileuser
passwd compileuser
visudo
## Allow root to run any commands anywhere
root ALL=(ALL) ALL
compileuser ALL=(ALL) ALL
su compileuser
mkdir $HOME/rpm
mkdir $HOME/rpm/SOURCES
mkdir $HOME/rpm/SPECS
mkdir $HOME/rpm/BUILD
mkdir $HOME/rpm/SRPMS
mkdir $HOME/rpm/RPMS
mkdir $HOME/rpm/RPMS/i386
mkdir $HOME/rpm/RPMS/x86_64
echo "%_topdir $HOME/rpm" >> $HOME/.rpmmacros
wget http://prdownloads.sourceforge.net/courier/courier-authlib-0.61.0.tar.bz2
wget http://prdownloads.sourceforge.net/courier/courier-imap-4.4.1.tar.bz2
wget http://prdownloads.sourceforge.net/courier/maildrop-2.0.4.tar.bz2
sudo rpmbuild -ta courier-authlib-0.61.0.tar.bz2
sudo rpm -ivh /home/compileuser/rpm/RPMS/i386/courier-authlib-0.61.0-1.i386.rpm
sudo rpm -ivh /home/compileuser/rpm/RPMS/i386/courier-authlib-mysql-0.61.0-1.i386.rpm
sudo rpm -ivh /home/compileuser/rpm/RPMS/i386/courier-authlib-devel-0.61.0-1.i386.rpm
rpmbuild -ta courier-imap-4.4.1.tar.bz2
sudo rpm -ivh /home/compileuser/rpm/RPMS/i386/courier-imap-4.4.1-1.i386.rpm
sudo rpmbuild -ta maildrop-2.0.4.tar.bz2
sudo rpm -ivh /home/compileuser/rpm/RPMS/i386/maildrop-2.0.4-1.i386.rpm
exit
chkconfig --levels 235 mysqld on
/etc/init.d/mysqld start
chkconfig --levels 235 httpd on
/etc/init.d/httpd start
chkconfig --levels 235 courier-authlib on
/etc/init.d/courier-authlib start
chkconfig --levels 235 sendmail off
chkconfig --levels 235 postfix on
chkconfig --levels 235 saslauthd on
/etc/init.d/sendmail stop
/etc/init.d/postfix start
/etc/init.d/saslauthd start
chkconfig --levels 235 courier-imap on
/etc/init.d/courier-authlib restart
/etc/init.d/courier-imap restart
Set the mysql database password:
mysqladmin -u root password yourrootsqlpassword
mysqladmin -h ispconfig.local -u root password yourrootsqlpassword
2) Install Amavisd-new, Spamassassin and Clamav (1 line!):
yum install amavisd-new spamassassin clamav clamd clamav-data clamav-server clamav-update unzip bzip2 unrar
chkconfig --levels 235 amavisd on
chkconfig --levels 235 clamd on
/usr/bin/freshclam
/etc/init.d/amavisd start
/etc/init.d/clamd start
If you use the amavisd from rpmforge and not the one from centos, you will have to do these additional steps:
add the following line in /etc/sysconfig/amavisd:
CONFIG_FILE="/etc/amavisd/amavisd.conf
run:
mkdir /var/run/amavisd /var/spool/amavisd /var/spool/amavisd/tmp /var/spool/amavisd/db
chown amavis /var/run/amavisd /var/spool/amavisd /var/spool/amavisd/tmp /var/spool/amavisd/db
yum install perl-DBD-mysql
3) Install apache, PHP5 and phpmyadmin (1 line!):
yum install php php-devel php-gd php-imap php-ldap php-mysql php-odbc php-pear php-xml php-xmlrpc php-eaccelerator php-magickwand php-magpierss php-mapserver php-mbstring php-mcrypt php-mhash php-mssql php-shout php-snmp php-soap php-tidy curl curl-devel perl-libwww-perl ImageMagick libxml2 libxml2-devel phpmyadmin
4) Install pure-ftpd and quota
cd /tmp
wget http://centos.karan.org/el5/extras/testing/i386/RPMS/pure-ftpd-1.0.21-15.el5.kb.i386.rpm
rpm -i pure-ftpd-1.0.21-15.el5.kb.i386.rpm
yum install quota
chkconfig --levels 235 pure-ftpd on
/etc/init.d/pure-ftpd start
5) Install mydns
wget http://mydns.bboy.net/download/mydns-mysql-1.1.0-1.i386.rpm
rpm -ivh mydns-mysql-1.1.0-1.i386.rpm
chkconfig --levels 235 mydns on
6) Install vlogger and webalizer
yum install webalizer perl-DateTime-Format-HTTP perl-DateTime-Format-Builder
cd /tmp
wget http://n0rp.chemlab.org/vlogger/vlogger-1.3.tar.gz
tar xvfz vlogger-1.3.tar.gz
mv vlogger-1.3/vlogger /usr/sbin/
rm -rf vlogger*
Edit the file /etc/sudoers
vi /etc/sudoers
and change the line:
Defaults requiretty
to:
# Defaults requiretty
7) Install ISPConfig 3
Disable the firewall:
system-config-securitylevel-tui
There are two possile scenarios, but not both:
7.1) Install the latest released version
7.2) Install directly from SVN
7.1) Installation of beta 3 from tar.gz
cd /tmp
wget http://www.ispconfig.org/downloads/ISPConfig-3.0.0.9-rc2.tar.gz
tar xvfz ISPConfig-3.0.0.9-rc2.tar.gz
cd ispconfig3_install/install/
7.2) Installation from SVN
yum install subversion
cd /tmp
svn export svn://svn.ispconfig.org/ispconfig3/trunk/
cd trunk/install
7.1+7.2) Now proceed with the ISPConfig installation.
Now start the installation process by executing:
php -q install.php
The installer will configure all services like postfix, sasl, courier, etc. for you. A manual setup as required for ISPConfig 2 (perfect setup guides) is not necessary. To login to the ISPConfig controlpanel, open the following URL in your browser (replace the IP to match your settings!):
http://192.168.0.100:8080/
the default login is:
user: admin
password: admin
In case you get a permission denied error from apache, please restart the apache webserver process.
Optional:
Install a webbased Email Client
yum install squirrelmail
----------------------------------------------------------------------------------------------------------
Hints:
debian 4.0 under openvz:
VPSID=101
for CAP in CHOWN DAC_READ_SEARCH SETGID SETUID NET_BIND_SERVICE NET_ADMIN SYS_CHROOT SYS_NICE CHOWN DAC_READ_SEARCH SETGID SETUID NET_BIND_SERVICE NET_ADMIN SYS_CHROOT SYS_NICE
do
vzctl set $VPSID --capability ${CAP}:on --save
done
----------------------------------------------------------------------------------------------------------
Installing Jailkit:
cd /tmp
wget http://olivier.sessink.nl/jailkit/jailkit-2.5.tar.gz
tar xvfz jailkit-2.5.tar.gz
cd jailkit-2.5
./configure
make
make install
rm -rf jailkit-2.5*
docs/INSTALL_CENTOS_5.4_dovecot_bind.txt deleted 100644 → 0
View file @ 52983de5
Installation
-----------
It is recommended to use a clean (fresh) CentOS 5.4 install. Then follow the steps below to setup your server with ISPConfig 3:
Installation of some basic requirements:
rpm --import /etc/pki/rpm-gpg/RPM-GPG-KEY*
enable the contrib and centosplus repositories.
vi /etc/yum.repos.d/CentOS-Base.repo
1. Edit the file /etc/yum.repos.d/CentOS-Base.repo and edit the lines below.
[base]
exclude=postfix
[update]
exclude=postfix
[centosplus]
enabled=1
includepkgs=postfix
[contrib]
enabled=1
rpm --import http://dag.wieers.com/rpm/packages/RPM-GPG-KEY.dag.txt
cd /tmp
wget http://packages.sw.be/rpmforge-release/rpmforge-release-0.5.1-1.el5.rf.i386.rpm
rpm -i rpmforge-release-0.5.1-1.el5.rf.i386.rpm
yum update
You should disable selinux now, as some programs will not start when selinux is enabled:
system-config-securitylevel-tui
then reboot the server.
Then remove the postfix without mysql support
yum remove postfix
1) Install Postfix fron centosplus with mysql support, Dovecot, MySQL, phpMyAdmin with the following command line (on one line!):
yum install ntp httpd mysql-server php php-mysql php-mbstring phpMyAdmin postfix getmail
For 32Bit systems:
rpm -i http://dl.atrpms.net/all/dovecot-1.2.11-3_108.el5.i386.rpm
rpm -i http://dl.atrpms.net/all/dovecot-sieve-0.1.15-4.el5.i386.rpm
For 64Bit Systems:
rpm -ivh http://dl.atrpms.net/all/dovecot-1.2.11-3_108.el5.x86_64.rpm
rpm -ivh http://dl.atrpms.net/all/dovecot-sieve-0.1.15-4.el5.x86_64.rpm
chkconfig --levels 235 mysqld on
/etc/init.d/mysqld start
chkconfig --levels 235 httpd on
/etc/init.d/httpd start
chkconfig --levels 235 dovecot on
/etc/init.d/dovecot start
chkconfig --levels 235 sendmail off
chkconfig --levels 235 postfix on
/etc/init.d/sendmail stop
/etc/init.d/postfix start
Set the mysql database password:
/usr/bin/mysql_secure_installation
2) Install Amavisd-new, Spamassassin and Clamav (1 line!):
yum install amavisd-new spamassassin clamav clamd unzip bzip2 unrar
sa-update
chkconfig --levels 235 amavisd on
chkconfig --levels 235 clamd on
/usr/bin/freshclam
/etc/init.d/amavisd start
/etc/init.d/clamd start
If you use the amavisd from rpmforge (as we do in this guide) and not the one from centos, you will have to do these additional steps:
add the following line in /etc/sysconfig/amavisd:
CONFIG_FILE="/etc/amavisd/amavisd.conf
run:
mkdir /var/run/amavisd /var/spool/amavisd /var/spool/amavisd/tmp /var/spool/amavisd/db
chown amavis /var/run/amavisd /var/spool/amavisd /var/spool/amavisd/tmp /var/spool/amavisd/db
ln -s /var/run/clamav/clamd.sock /var/spool/amavisd/clamd.sock
yum install perl-DBD-mysql
3) Install apache, PHP5 and phpmyadmin (1 line!):
yum install php php-devel php-gd php-imap php-ldap php-mysql php-odbc php-pear php-xml php-xmlrpc php-eaccelerator php-mbstring php-mcrypt php-mhash php-mssql php-snmp php-soap php-tidy curl curl-devel perl-libwww-perl ImageMagick libxml2 libxml2-devel phpmyadmin
4) Install pure-ftpd and quota
yum install pure-ftpd quota
chkconfig --levels 235 pure-ftpd on
/etc/init.d/pure-ftpd start
5) Install bind dns server
yum install bind-chroot
chmod 755 /var/named/
chmod 775 /var/named/chroot/
chmod 775 /var/named/chroot/var/
chmod 775 /var/named/chroot/var/named/
chmod 775 /var/named/chroot/var/run/
chmod 777 /var/named/chroot/var/run/named/
cd /var/named/chroot/var/named/
ln -s ../../ chroot
cp /usr/share/doc/bind-9.3.6/sample/var/named/named.local /var/named/chroot/var/named/named.local
cp /usr/share/doc/bind-9.3.6/sample/var/named/named.root /var/named/chroot/var/named/named.root
touch /var/named/chroot/etc/named.conf
touch /var/named/chroot/etc/named.conf.local
vi /var/named/chroot/etc/named.conf
--------------------------------------------------------------------------------------------------
//
// named.conf
//
// Provided by Red Hat bind package to configure the ISC BIND named(8) DNS
// server as a caching only nameserver (as a localhost DNS resolver only).
//
// See /usr/share/doc/bind*/sample/ for example named configuration files.
//
options {
listen-on port 53 { 127.0.0.1; };
listen-on-v6 port 53 { ::1; };
directory "/var/named/chroot/var/named";
dump-file "/var/named/chroot/var/named/data/cache_dump.db";
statistics-file "/var/named/chroot/var/named/data/named_stats.txt";
memstatistics-file "/var/named/chroot/var/named/data/named_mem_stats.txt";
allow-query { localhost; };
recursion yes;
};
logging {
channel default_debug {
file "data/named.run";
severity dynamic;
};
};
zone "." IN {
type hint;
file "named.root";
};
include "/var/named/chroot/etc/named.conf.local";
--------------------------------------------------------------------------------------------------
chkconfig --levels 235 named on
/etc/init.d/named start
6) Install vlogger dependencies and webalizer
yum install webalizer perl-DateTime-Format-HTTP perl-DateTime-Format-Builder
Installing Jailkit:
yum install gcc
cd /tmp
wget http://olivier.sessink.nl/jailkit/jailkit-2.11.tar.gz
tar xvfz jailkit-2.11.tar.gz
cd jailkit-2.11
./configure
make
make install
rm -rf jailkit-2.11*
Edit the file /etc/sudoers
vi /etc/sudoers
and change the line:
Defaults requiretty
to:
# Defaults requiretty
7) Install ISPConfig 3
cd /tmp
wget http://www.ispconfig.org/downloads/ISPConfig-3.0.2.tar.gz
tar xvfz ISPConfig-3.0.2.tar.gz
cd ispconfig3_install/install/
Now start the installation process by executing:
php -q install.php
The installer will configure all services like postfix, sasl, courier, etc. for you. A manual setup as required for ISPConfig 2 (perfect setup guides) is not necessary. To login to the ISPConfig controlpanel, open the following URL in your browser (replace the IP to match your settings!):
http://192.168.0.100:8080/
the default login is:
user: admin
password: admin
In case you get a permission denied error from apache, please restart the apache webserver process.
Optional:
Install a webbased Email Client
yum install squirrelmail
docs/INSTALL_DEBIAN_4.0.txt deleted 100644 → 0
View file @ 52983de5
Installation
-----------
It is recommended to use a clean (fresh) Debian etch install where you just selected "Standard System" as the package selection during setup. Then follow the steps below to setup your server with ISPConfig 3:
assign hostname (for example ispconfig)
echo ispconfig.example.com > /etc/hostname
vi /etc/hosts
and add line similar but appropriate:
127.0.0.1 localhost.localdomain localhost
192.168.0.100 ispconfig.example.com ispconfig
1) Add the debian volatile repository to the apt sources list:
vi /etc/apt/sources.list
and insert the line:
deb http://volatile.debian.org/debian-volatile etch/volatile main contrib non-free
Then execute these commands to insert the Debian voltaile gpg key to the apt keyring:
cd /tmp
apt-get install wget
wget http://www.debian.org/volatile/etch-volatile.asc
apt-key add etch-volatile.asc
rm -f etch-volatile.asc
Now we update the package list by executing:
apt-get update
Now Install Postfix, Courier, Saslauthd, MySQL, phpMyAdmin, ntpdate, rkhunter, binutils with the following command line (on one line!):
apt-get install postfix postfix-mysql postfix-doc mysql-client mysql-server courier-authdaemon courier-authlib-mysql courier-pop courier-pop-ssl courier-imap courier-imap-ssl libsasl2 libsasl2-modules libsasl2-modules-sql sasl2-bin libpam-mysql openssl courier-maildrop getmail4 ntp ntpdate rkhunter binutils sudo
Answer the questions from the package manager as follows.
Create directories for web-based administration ? <-- No
General type of configuration? <-- Internet site
Mail name? <-- server1.mydomain.tld
SSL certificate required <-- Ok
...use your own domain name of course ;)
Edit the file /etc/mysql/my.cnf
vi /etc/mysql/my.cnf
and comment out the line
bind-address = 127.0.0.1
then restart mysql
/etc/init.d/mysql restart
Set the mysql database password:
mysqladmin -u root password yourrootsqlpassword
mysqladmin -h ispconfig.local -u root password yourrootsqlpassword
2) Install Amavisd-new, Spamassassin and Clamav (1 line!):
apt-get install amavisd-new spamassassin clamav clamav-daemon zoo unzip bzip2 arj nomarch lzop cabextract apt-listchanges libnet-ldap-perl libauthen-sasl-perl clamav-docs daemon libio-string-perl libio-socket-ssl-perl libnet-ident-perl zip libnet-dns-perl
3) Install apache, PHP5 and phpmyadmin (1 line!):
apt-get install apache2 apache2.2-common apache2-doc apache2-mpm-prefork apache2-utils libexpat1 ssl-cert libapache2-mod-php5 php5 php5-common php5-gd php5-mysql php5-imap phpmyadmin php5-cli php5-cgi libapache2-mod-fcgid
Then run the following to enable the Apache modules:
a2enmod suexec
a2enmod rewrite
a2enmod ssl
a2enmod actions
a2enmod include
4) Install pure-ftpd and quota
apt-get install pure-ftpd-common pure-ftpd-mysql quota quotatool
Edit the file /etc/default/pure-ftpd-common
vi /etc/default/pure-ftpd-common
and change the start mode from inetd to standalone.
Edit the file /etc/inetd.conf
vi /etc/inetd.conf
and comment out the line for the FTP service, so it looks like this:
# ftp stream tcp nowait root /usr/sbin/tcpd /usr/sbin/pure-ftpd-wrapper
Then execute:
/etc/init.d/openbsd-inetd restart
5) Install mydns
apt-get install mydns-mysql
What is the hostname of the machine on which the database will run? -> localhost
What is the database name for the MyDNS database? -> mydns
Would you like to set up the database and tables automatically? -> yes
What is the username of the MySQL administrator? -> root
Enter the MySQL administrator password -> yourrootsqlpassword
Confirm this password -> yourrootsqlpassword
What is the MyDNS username? -> mydns
What is the MyDNS user password? -> mydnspassword
The mydns installer is a bit tricky, you will have to select to create a new database for mydns and use a existing mysql user, e.g. the mysql root user. This database is only to fullfill the requirements for the debian pacakge during installation and will not be used by ISPConfig later. ISPConfig will automatically change the mydns configuration files to use the ISPConfig database.
6) Install vlogger and webalizer
apt-get install vlogger webalizer
7) Install Jailkit (optional, only needed if you want to use chrroting for SSH users)
apt-get install build-essential autoconf automake1.9 libtool flex bison debhelper
cd /tmp
wget http://olivier.sessink.nl/jailkit/jailkit-2.7.tar.gz
tar xvfz jailkit-2.7.tar.gz
cd jailkit-2.7
./debian/rules binary
cd ..
dpkg -i jailkit_2.7-1_i386.deb
rm -rf jailkit-2.7*
8) Install fail2ban (optional but recomended, because the monitor tries to show the log)
More info at: http://www.howtoforge.com/fail2ban_debian_etch
apt-get install fail2ban
9) Install ISPConfig 3
There are two possile scenarios, but not both:
9.1) Install the latest released version
9.2) Install directly from SVN
9.1) Installation of last version from tar.gz
cd /tmp
wget http://www.ispconfig.org/downloads/ISPConfig-3.0.0.9-rc2.tar.gz
tar xvfz ISPConfig-3.0.0.9-rc2.tar.gz
cd ispconfig3_install/install/
9.2) Installation from SVN