Compare revisions

f2bbced5 · 66c3bc24 · 66c3bc24 · 66c3bc24 · 66c3bc24 · 66c3bc24
--- a/docs/INSTALL.txt
+++ b/docs/INSTALL.txt
+The installation instructions for ISPConfig can be found here:
+https://www.ispconfig.org/page/en/documentation.html
--- a/docs/INSTALL_CENTOS_5.2.txt
+++ b/docs/INSTALL_CENTOS_5.2.txt
-WARNING: Support for CentOS is experimental only. For production systems better use Debian or Ubuntu.
-Installation
-----------
-It is recommended to use a clean (fresh) CentOS 5.2 install. Then follow the steps below to setup your server with ISPConfig 3:
-Installation of some basic requirements:
-rpm --import /etc/pki/rpm-gpg/RPM-GPG-KEY*
-yum update
-yum groupinstall 'Development Tools'
-yum groupinstall 'Development Libraries'
-You should disable selinux now, as some programs will not start when selinux is enabled:
-system-config-securitylevel-tui
-then reboot the server.
-1) Install Postfix, Courier, Saslauthd, MySQL, phpMyAdmin with the following command line (on one line!):
-yum install ntp httpd mysql-server php php-mysql php-mbstring rpm-build gcc mysql-devel openssl-devel cyrus-sasl-devel pkgconfig zlib-devel phpMyAdmin pcre-devel openldap-devel postgresql-devel expect libtool-ltdl-devel openldap-servers libtool gdbm-devel pam-devel gamin-devel postfix
-rpm --import http://dag.wieers.com/rpm/packages/RPM-GPG-KEY.dag.txt
-cd /tmp
-wget http://packages.sw.be/rpmforge-release/rpmforge-release-0.3.6-1.el5.rf.i386.rpm
-rpm -i rpmforge-release-0.3.6-1.el5.rf.i386.rpm
-yum update
-yum install getmail
-useradd -m -s /bin/bash compileuser
-passwd compileuser
-visudo
-## Allow root to run any commands anywhere
-root    ALL=(ALL)       ALL
-compileuser   ALL=(ALL)       ALL
-su compileuser
-mkdir $HOME/rpm
-mkdir $HOME/rpm/SOURCES
-mkdir $HOME/rpm/SPECS
-mkdir $HOME/rpm/BUILD
-mkdir $HOME/rpm/SRPMS
-mkdir $HOME/rpm/RPMS
-mkdir $HOME/rpm/RPMS/i386
-mkdir $HOME/rpm/RPMS/x86_64
-echo "%_topdir $HOME/rpm" >> $HOME/.rpmmacros
-wget http://prdownloads.sourceforge.net/courier/courier-authlib-0.61.0.tar.bz2
-wget http://prdownloads.sourceforge.net/courier/courier-imap-4.4.1.tar.bz2
-wget http://prdownloads.sourceforge.net/courier/maildrop-2.0.4.tar.bz2
-sudo rpmbuild -ta courier-authlib-0.61.0.tar.bz2
-sudo rpm -ivh /home/compileuser/rpm/RPMS/i386/courier-authlib-0.61.0-1.i386.rpm
-sudo rpm -ivh /home/compileuser/rpm/RPMS/i386/courier-authlib-mysql-0.61.0-1.i386.rpm
-sudo rpm -ivh /home/compileuser/rpm/RPMS/i386/courier-authlib-devel-0.61.0-1.i386.rpm
-rpmbuild -ta courier-imap-4.4.1.tar.bz2
-sudo rpm -ivh /home/compileuser/rpm/RPMS/i386/courier-imap-4.4.1-1.i386.rpm
-sudo rpmbuild -ta maildrop-2.0.4.tar.bz2
-sudo rpm -ivh /home/compileuser/rpm/RPMS/i386/maildrop-2.0.4-1.i386.rpm
-exit
-chkconfig --levels 235 mysqld on
-/etc/init.d/mysqld start
-chkconfig --levels 235 httpd on
-/etc/init.d/httpd start
-chkconfig --levels 235 courier-authlib on
-/etc/init.d/courier-authlib start
-chkconfig --levels 235 sendmail off
-chkconfig --levels 235 postfix on
-chkconfig --levels 235 saslauthd on
-/etc/init.d/sendmail stop
-/etc/init.d/postfix start
-/etc/init.d/saslauthd start
-chkconfig --levels 235 courier-imap on
-/etc/init.d/courier-authlib restart
-/etc/init.d/courier-imap restart
-Set the mysql database password:
-mysqladmin -u root password yourrootsqlpassword
-mysqladmin -h ispconfig.local -u root password yourrootsqlpassword
-2) Install Amavisd-new, Spamassassin and Clamav (1 line!):
-yum install amavisd-new spamassassin clamav clamd clamav-data clamav-server clamav-update unzip bzip2 unrar
-chkconfig --levels 235 amavisd on
-chkconfig --levels 235 clamd on
-/usr/bin/freshclam
-/etc/init.d/amavisd start
-/etc/init.d/clamd start
-If you use the amavisd from rpmforge and not the one from centos, you will have to do these additional steps:
-add the following line in /etc/sysconfig/amavisd:
-CONFIG_FILE="/etc/amavisd/amavisd.conf
-run:
-mkdir /var/run/amavisd /var/spool/amavisd /var/spool/amavisd/tmp /var/spool/amavisd/db
-chown amavis /var/run/amavisd /var/spool/amavisd /var/spool/amavisd/tmp /var/spool/amavisd/db
-yum install perl-DBD-mysql
-3) Install apache, PHP5 and phpmyadmin (1 line!):
-yum install php php-devel php-gd php-imap php-ldap php-mysql php-odbc php-pear php-xml php-xmlrpc php-eaccelerator php-magickwand php-magpierss php-mapserver php-mbstring php-mcrypt php-mhash php-mssql php-shout php-snmp php-soap php-tidy curl curl-devel perl-libwww-perl ImageMagick libxml2 libxml2-devel phpmyadmin
-4) Install pure-ftpd and quota
-cd /tmp
-wget http://centos.karan.org/el5/extras/testing/i386/RPMS/pure-ftpd-1.0.21-15.el5.kb.i386.rpm
-rpm -i pure-ftpd-1.0.21-15.el5.kb.i386.rpm
-yum install quota
-chkconfig --levels 235 pure-ftpd on
-/etc/init.d/pure-ftpd start
-5) Install mydns
-wget http://mydns.bboy.net/download/mydns-mysql-1.1.0-1.i386.rpm
-rpm -ivh mydns-mysql-1.1.0-1.i386.rpm
-chkconfig --levels 235 mydns on
-6) Install vlogger and webalizer
-yum install webalizer perl-DateTime-Format-HTTP perl-DateTime-Format-Builder
-cd /tmp
-wget http://n0rp.chemlab.org/vlogger/vlogger-1.3.tar.gz
-tar xvfz vlogger-1.3.tar.gz
-mv vlogger-1.3/vlogger /usr/sbin/
-rm -rf vlogger*
-7) Install ISPConfig 3
-Disable the firewall:
-system-config-securitylevel-tui
-There are two possile scenarios, but not both:
-7.1) Install the latest released version 
-7.2) Install directly from SVN
-7.1) Installation of beta 3 from tar.gz
-  cd /tmp
-  wget http://www.ispconfig.org/downloads/ISPConfig-3.0.0.9-rc2.tar.gz
-  tar xvfz ISPConfig-3.0.0.9-rc2.tar.gz
-  cd ispconfig3_install/install/
-7.2) Installation from SVN
-  yum install subversion
-  cd /tmp
-  svn export svn://svn.ispconfig.org/ispconfig3/trunk/
-  cd trunk/install
-7.1+7.2) Now proceed with the ISPConfig installation.
-Now start the installation process by executing:
-php -q install.php
-The installer will configure all services like postfix, sasl, courier, etc. for you. A manual setup as required for ISPConfig 2 (perfect setup guides) is not nescessary. To login to the ISPConfig controlpanel, open the following URL in your browser (replace the IP to match your settings!):
-http://192.168.0.100:8080/
-the default login is:
-user: admin
-password: admin
-In case you get a permission denied error from apache, please restart the apache webserver process.
-Optional:
-Install a webbased Email Client
-yum install squirrelmail
----------------------------------------------------------------------------------------------------------
-Hints:
-debian 4.0 under openvz:
-VPSID=101
-for CAP in CHOWN DAC_READ_SEARCH SETGID SETUID NET_BIND_SERVICE NET_ADMIN SYS_CHROOT SYS_NICE CHOWN DAC_READ_SEARCH SETGID SETUID NET_BIND_SERVICE NET_ADMIN SYS_CHROOT SYS_NICE
-do
-  vzctl set $VPSID --capability ${CAP}:on --save
-done
----------------------------------------------------------------------------------------------------------
-Installing Jailkit:
-cd /tmp
-wget http://olivier.sessink.nl/jailkit/jailkit-2.5.tar.gz
-tar xvfz jailkit-2.5.tar.gz
-cd jailkit-2.5
-./configure
-make
-make install
-rm -rf jailkit-2.5*
--- a/docs/INSTALL_DEBIAN_4.0.txt
+++ b/docs/INSTALL_DEBIAN_4.0.txt
-Installation
-----------
-It is recommended to use a clean (fresh) Debian etch install where you just selected "Standard System" as the package selection during setup. Then follow the steps below to setup your server with ISPConfig 3:
-assign hostname (for example ispconfig)
-echo ispconfig.example.com > /etc/hostname
-vi /etc/hosts
-and add line similar but appropriate:
-127.0.0.1       localhost.localdomain   localhost
-192.168.0.100   ispconfig.example.com   ispconfig
-1) Add the debian volatile repository to the apt sources list:
-vi /etc/apt/sources.list
-and insert the line:
-deb http://volatile.debian.org/debian-volatile etch/volatile main contrib non-free
-Then execute these commands to insert the Debian voltaile gpg key to the apt keyring:
-cd /tmp
-apt-get install wget
-wget http://www.debian.org/volatile/etch-volatile.asc
-apt-key add etch-volatile.asc
-rm -f etch-volatile.asc
-Now we update the package list by executing:
-apt-get update
-Now Install Postfix, Courier, Saslauthd, MySQL, phpMyAdmin, ntpdate, rkhunter, binutils with the following command line (on one line!):
-apt-get install postfix postfix-mysql postfix-doc mysql-client mysql-server courier-authdaemon courier-authlib-mysql courier-pop courier-pop-ssl courier-imap courier-imap-ssl libsasl2 libsasl2-modules libsasl2-modules-sql sasl2-bin libpam-mysql openssl courier-maildrop getmail4 ntp ntpdate rkhunter binutils
-Answer the questions from the package manager as follows.
-Create directories for web-based administration ? <-- No
-General type of configuration? <-- Internet site
-Mail name? <-- server1.mydomain.tld
- SSL certificate required <-- Ok
-...use your own domain name of course ;)
-Edit the file /etc/mysql/my.cnf
-vi /etc/mysql/my.cnf
-and comment out the line
-bind-address          = 127.0.0.1
-then restart mysql
-/etc/init.d/mysql restart
-Set the mysql database password:
-mysqladmin -u root password yourrootsqlpassword
-mysqladmin -h ispconfig.local -u root password yourrootsqlpassword
-2) Install Amavisd-new, Spamassassin and Clamav (1 line!):
-apt-get install amavisd-new spamassassin clamav clamav-daemon zoo unzip bzip2 arj nomarch lzop cabextract apt-listchanges libnet-ldap-perl libauthen-sasl-perl clamav-docs daemon libio-string-perl libio-socket-ssl-perl libnet-ident-perl zip libnet-dns-perl
-3) Install apache, PHP5 and phpmyadmin (1 line!):
-apt-get install apache2 apache2.2-common apache2-doc apache2-mpm-prefork apache2-utils libexpat1 ssl-cert libapache2-mod-php5 php5 php5-common php5-gd php5-mysql php5-imap phpmyadmin php5-cli php5-cgi libapache2-mod-fcgid
-Then run the following to enable the Apache modules:
-a2enmod suexec
-a2enmod rewrite
-a2enmod ssl
-a2enmod actions
-a2enmod include
-4) Install pure-ftpd and quota
-apt-get install pure-ftpd-common pure-ftpd-mysql quota quotatool
-Edit the file /etc/default/pure-ftpd-common
-vi /etc/default/pure-ftpd-common
-and change the start mode from inetd to standalone. 
-Edit the file /etc/inetd.conf
-vi /etc/inetd.conf
-and comment out the line for the FTP service, so it looks like this:
-# ftp   stream  tcp     nowait  root    /usr/sbin/tcpd /usr/sbin/pure-ftpd-wrapper
-Then execute:
-/etc/init.d/openbsd-inetd restart
-5) Install mydns
-apt-get install mydns-mysql
-What is the hostname of the machine on which the database will run? -> localhost
-What is the database name for the MyDNS database? -> mydns
-Would you like to set up the database and tables automatically? -> yes
-What is the username of the MySQL administrator? -> root
-Enter the MySQL administrator password -> yourrootsqlpassword
-Confirm this password -> yourrootsqlpassword
-What is the MyDNS username? -> mydns
-What is the MyDNS user password? -> mydnspassword
-The mydns installer is a bit tricky, you will have to select to create a new database for mydns and use a existing mysql user, e.g. the mysql root user. This database is only to fullfill the requirements for the debian pacakge during installation and will not be used by ISPConfig later. ISPConfig will automatically change the mydns configuration files to use the ISPConfig database.
-6) Install vlogger and webalizer
-apt-get install vlogger webalizer
-7) Install Jailkit (optional, only needed if you want to use chrroting for SSH users)
-apt-get install build-essential autoconf automake1.9 libtool flex bison debhelper
-cd /tmp
-wget http://olivier.sessink.nl/jailkit/jailkit-2.7.tar.gz
-tar xvfz jailkit-2.7.tar.gz
-cd jailkit-2.7
-./debian/rules binary
-cd ..
-dpkg -i jailkit_2.7-1_i386.deb
-rm -rf jailkit-2.7*
-8) Install fail2ban (optional but recomended, because the monitor tries to show the log)
-More info at: http://www.howtoforge.com/fail2ban_debian_etch
-apt-get install fail2ban
-9) Install ISPConfig 3
-There are two possile scenarios, but not both:
-9.1) Install the latest released version 
-9.2) Install directly from SVN
-9.1) Installation of last version from tar.gz
-  cd /tmp
-  wget http://www.ispconfig.org/downloads/ISPConfig-3.0.0.9-rc2.tar.gz
-  tar xvfz ISPConfig-3.0.0.9-rc2.tar.gz
-  cd ispconfig3_install/install/
-9.2) Installation from SVN
-  apt-get install subversion
-  cd /tmp
-  svn export svn://svn.ispconfig.org/ispconfig3/trunk/
-  cd trunk/install
-9.1+9.2) Now proceed with the ISPConfig installation.
-Now start the installation process by executing:
-php -q install.php
-The installer will configure all services like postfix, sasl, courier, etc. for you. A manual setup as required for ISPConfig 2 (perfect setup guides) is not nescessary. To login to the ISPConfig controlpanel, open the following URL in your browser (replace the IP to match your settings!):
-http://192.168.0.100:8080/
-the default login is:
-user: admin
-password: admin
-In case you get a permission denied error from apache, please restart the apache webserver process.
-Optional:
-Install a webbased Email Client
-apt-get install squirrelmail
-ln -s /usr/share/squirrelmail/ /var/www/webmail
-Access squirrelmail:
-http://192.168.0.100/webmail
-To configure squirrelmail, run:
-/usr/sbin/squirrelmail-configure
----------------------------------------------------------------------------------------------------------
-Hints:
-debian 4.0 under openvz:
-VPSID=101
-for CAP in CHOWN DAC_READ_SEARCH SETGID SETUID NET_BIND_SERVICE NET_ADMIN SYS_CHROOT SYS_NICE CHOWN DAC_READ_SEARCH SETGID SETUID NET_BIND_SERVICE NET_ADMIN SYS_CHROOT SYS_NICE
-do
-  vzctl set $VPSID --capability ${CAP}:on --save
-done
----------------------------------------------------------------------------------------------------------
-Optional packages recommended:
-denyhosts - a utility to help sys admins thwart ssh crackers
-rsync - fast remote file copy program (for backup)
\ No newline at end of file
--- a/docs/INSTALL_DEBIAN_5.0.txt
+++ b/docs/INSTALL_DEBIAN_5.0.txt
-Installation
-----------
-# It is recommended to use a clean (fresh) Debian lenny install where you just selected "Standard System" as the package selection during
-# setup. Then follow the steps below to setup your server with ISPConfig 3. In this guide "vi" is used as texteditor, but you ofcourse
-# you can use whatever you prefer. You should be root for doing all of this.
-# Check we have Fully Qualified Domain Name
-/bin/hostname
-# it should return something like "ispconfig.example.com"
-# if not, then we assign a hostname (for example ispconfig):
-echo ispconfig.example.com > /etc/hostname
-vi /etc/hosts
-# and add lines similar but appropriate:
-127.0.0.1       localhost.localdomain   localhost
-192.168.0.100   ispconfig.example.com   ispconfig
-# Some optional choices
-opt0.1) Optionally install SSH-server to get remote shell
-apt-get install ssh openssh-server
-opt0.2) Optionally if you are not running in virtual machine you can set server clocksync via NTP. Virtual quests get this from the host.
-apt-get install ntp ntpdate
-# Next is the real deal
-1) Install Postfix, Courier, Saslauthd, MySQL, phpMyAdmin, rkhunter, binutils with the following command line (on one line!):
-apt-get install postfix postfix-mysql postfix-doc mysql-client mysql-server courier-authdaemon courier-authlib-mysql courier-pop courier-pop-ssl courier-imap courier-imap-ssl libsasl2-2 libsasl2-modules libsasl2-modules-sql sasl2-bin libpam-mysql openssl courier-maildrop getmail4 rkhunter binutils
-# Answer the questions from the package manager as follows.
-Create directories for web-based administration ? <-- No
-General type of configuration? <-- Internet site
-Mail name? <-- server1.mydomain.tld
- SSL certificate required <-- Ok
-# ...use your own domain name of course ;)
-# Edit the file /etc/mysql/my.cnf
-vi /etc/mysql/my.cnf
-# and change the line:
-bind-address          = 127.0.0.1
-to:
-#bind-address          = 127.0.0.1
-# then restart mysql
-/etc/init.d/mysql restart
-2) Install Amavisd-new, Spamassassin and Clamav (1 line!):
-apt-get install amavisd-new spamassassin clamav clamav-daemon zoo unzip bzip2 arj nomarch lzop cabextract apt-listchanges libnet-ldap-perl libauthen-sasl-perl clamav-docs daemon libio-string-perl libio-socket-ssl-perl libnet-ident-perl zip libnet-dns-perl
-# During the installation, the SSL certificates for IMAP-SSL and POP3-SSL are created with the hostname localhost. To change this to the correct hostname (server1.example.com in this tutorial), delete the certificates...
-cd /etc/courier
-rm -f /etc/courier/imapd.pem
-rm -f /etc/courier/pop3d.pem
-# ... and modify the following two files; replace CN=localhost with CN=server1.example.com (you can also modify the other values, if necessary):
-vi /etc/courier/imapd.cnf
-[...]
-CN=server1.example.com
-[...]
-vi /etc/courier/pop3d.cnf
-[...]
-CN=server1.example.com
-[...]
-# Then recreate the certificates...
-mkimapdcert
-mkpop3dcert
-# ... and restart Courier-IMAP-SSL and Courier-POP3-SSL:
-/etc/init.d/courier-imap-ssl restart
-/etc/init.d/courier-pop-ssl restart 
-3) Install apache, PHP5, phpmyadmin, better fastCGI, suexec, Pear and mcrypt (1 line!):
-apt-get install apache2 apache2.2-common apache2-doc apache2-mpm-prefork apache2-utils libexpat1 ssl-cert libapache2-mod-php5 php5 php5-common php5-gd php5-mysql php5-imap phpmyadmin php5-cli php5-cgi libapache2-mod-fcgid apache2-suexec php-pear php-auth php5-mcrypt mcrypt php5-imagick imagemagick libapache2-mod-suphp libopenssl-ruby
-# When phpMyAdmin is asking weather to configure itself automatically, select "Apache2"
-# Then run the following to enable the Apache modules suexec, rewrite and ssl:
-a2enmod suexec rewrite ssl actions include
-# restart apache before continuing
-/etc/init.d/apache2 restart
-4) Install pure-ftpd and quota
-apt-get install pure-ftpd-common pure-ftpd-mysql quota quotatool
-# Edit the file /etc/default/pure-ftpd-common to change the start mode from "inetd" to "standalone"
-and set VIRTUALCHROOT=true
-vi /etc/default/pure-ftpd-common
-# Edit the file /etc/inetd.conf to prevent inetd from trying to start ftp.
-# To do this, comment line starting like "ftp   stream  tcp" by adding "#"-sign in front of the line.
-vi /etc/inetd.conf
-# Then execute:
-/etc/init.d/openbsd-inetd restart
-# Some additional settings for pureftpd
-echo 'yes' > /etc/pure-ftpd/conf/DontResolve
-# Enable TLS in pureftpd
-echo 1 > /etc/pure-ftpd/conf/TLS
-mkdir -p /etc/ssl/private/
-openssl req -x509 -nodes -newkey rsa:1024 -keyout /etc/ssl/private/pure-ftpd.pem  -out /etc/ssl/private/pure-ftpd.pem
-chmod 600 /etc/ssl/private/pure-ftpd.pem 
-# Edit /etc/fstab. Mine looks like this (I added ,usrquota,grpquota to the partition with the mount point /):
-vi /etc/fstab
----------------------------------------------------------------------------------------------
-# /etc/fstab: static file system information.
-#
-# <file system> <mount point>   <type>  <options>       <dump>  <pass>
-proc            /proc           proc    defaults        0       0
-/dev/sda1       /               ext3    errors=remount-ro,usrquota,grpquota 0       1
-/dev/sda5       none            swap    sw              0       0
-/dev/hda        /media/cdrom0   udf,iso9660 user,noauto     0       0
-/dev/fd0        /media/floppy0  auto    rw,user,noauto  0       0
----------------------------------------------------------------------------------------------
-# To enable quota, run these commands:
-touch /quota.user /quota.group
-chmod 600 /quota.*
-mount -o remount /
-quotacheck -avugm
-quotaon -avug
-5) Install mydns
-apt-get install g++ libc6 gcc gawk make texinfo libmysqlclient15-dev
-cd /tmp
-wget http://heanet.dl.sourceforge.net/sourceforge/mydns-ng/mydns-1.2.8.25.tar.gz
-tar xvfz mydns-1.2.8.25.tar.gz
-cd mydns-1.2.8
-./configure
-make
-make install
-# Now create the start / stop script for mydns:
-vi /etc/init.d/mydns
-# and enter the following lines (between the ----- lines):
------------------------------------------------------
-#! /bin/sh
-#
-# mydns         Start the MyDNS server
-#
-# Author:       Philipp Kern <phil@philkern.de>.
-#               Based upon skeleton 1.9.4 by Miquel van Smoorenburg
-#               <miquels@cistron.nl> and Ian Murdock <imurdock@gnu.ai.mit.edu>.
-#
-set -e
-PATH=/usr/local/sbin:/usr/local/bin:/sbin:/bin:/usr/sbin:/usr/bin
-DAEMON=/usr/local/sbin/mydns
-NAME=mydns
-DESC="DNS server"
-SCRIPTNAME=/etc/init.d/$NAME
-# Gracefully exit if the package has been removed.
-test -x $DAEMON || exit 0
-case "$1" in
-  start)
-        echo -n "Starting $DESC: $NAME"
-        start-stop-daemon --start --quiet \
-                --exec $DAEMON -- -b
-        echo "."
-        ;;
-  stop)
-        echo -n "Stopping $DESC: $NAME"
-        start-stop-daemon --stop --oknodo --quiet \
-                --exec $DAEMON
-        echo "."
-        ;;
-  reload|force-reload)
-        echo -n "Reloading $DESC configuration..."
-        start-stop-daemon --stop --signal HUP --quiet \
-                --exec $DAEMON
-        echo "done."
-        ;;
-  restart)
-        echo -n "Restarting $DESC: $NAME"
-        start-stop-daemon --stop --quiet --oknodo \
-                --exec $DAEMON
-        sleep 1
-        start-stop-daemon --start --quiet \
-                --exec $DAEMON -- -b
-        echo "."
-        ;;
-  *)
-        echo "Usage: $SCRIPTNAME {start|stop|restart|reload|force-reload}" >&2
-        exit 1
-        ;;
-esac
-exit 0
---------------------------------------------------------------------------
-# now execute:
-chmod +x /etc/init.d/mydns
-update-rc.d mydns defaults
-6) Install vlogger and webalizer
-apt-get install vlogger webalizer
-Change the following line in /etc/webalizer/webalizer.conf from
-#Incremental    no
-to
-Incremental    yes 
-7) Install Jailkit (optional, only needed if you want to use chrroting for SSH users)
-apt-get install build-essential autoconf automake1.9 libtool flex bison debhelper
-cd /tmp
-wget http://olivier.sessink.nl/jailkit/jailkit-2.7.tar.gz
-tar xvfz jailkit-2.7.tar.gz
-cd jailkit-2.7
-./debian/rules binary
-cd ..
-dpkg -i jailkit_2.7-1_i386.deb
-rm -rf jailkit-2.7*
-8) Install fail2ban (optional but recomended, because the monitor tries to show the log)
-More info at: http://www.howtoforge.com/fail2ban_debian_etch
-apt-get install fail2ban
-9) Install ISPConfig 3
-# There are two possile scenarios, but not both:
-9.1) Install the latest released version 
-9.2) Install directly from SVN
-9.1) Installation of last version from tar.gz
-  cd /tmp
-  wget http://www.ispconfig.org/downloads/ISPConfig-3.0.0.9-rc2.tar.gz
-  tar xvfz ISPConfig-3.0.0.9-rc2.tar.gz
-  cd ispconfig3_install/install/
-9.2) Installation from SVN
-  apt-get install subversion
-  cd /tmp
-  svn export svn://svn.ispconfig.org/ispconfig3/trunk/
-  cd trunk/install
-9.1+9.2) Now proceed with the ISPConfig installation.
-# Now start the installation process by executing:
-php -q install.php
-# The installer will configure all services like postfix, sasl, courier, etc. for you. A manual setup as required for ISPConfig 2 (perfect setup guides) is not nescessary. To login to the ISPConfig controlpanel, open the following URL in your browser (replace the IP to match your settings!):
-http://192.168.0.100:8080/
-# the default login is:
-user: admin
-password: admin
-# In case you get a permission denied error from apache, please restart the apache webserver process.
----------------------------------------------------------------------------------------------------------
-Optional:
-Install a webbased Email Client
-apt-get install squirrelmail
-ln -s /usr/share/squirrelmail/ /var/www/webmail
-Access squirrelmail:
-http://192.168.0.100/webmail
-To configure squirrelmail, run:
-/usr/sbin/squirrelmail-configure
----------------------------------------------------------------------------------------------------------
-Hints:
-debian 5.0 under openvz:
-VPSID=101
-for CAP in CHOWN DAC_READ_SEARCH SETGID SETUID NET_BIND_SERVICE NET_ADMIN SYS_CHROOT SYS_NICE CHOWN DAC_READ_SEARCH SETGID SETUID NET_BIND_SERVICE NET_ADMIN SYS_CHROOT SYS_NICE
-do
-  vzctl set $VPSID --capability ${CAP}:on --save
-done
----------------------------------------------------------------------------------------------------------
-Optional recommended packages:
-denyhosts - a utility to help sys admins thwart ssh crackers
-rsync - fast remote file copy program (for backup)
-----------------------------------------------------------------------------------------------------------
-Possible errors and their solutions
------------------------------------
-pureftpd login does not work. Take a look at the syslog, if you find an error message like this:
-Mar 24 16:26:28 ispconfig pure-ftpd: (?@?) [ERROR] Sorry, invalid address given
-then pureftpd is not able to resolve the hostname. Name resolving can be disabled with these commands:
-echo 'yes' > /etc/pure-ftpd/conf/DontResolve
-/etc/init.d/pure-ftpd-mysql restart
--- a/docs/INSTALL_FEDORA_9.txt
+++ b/docs/INSTALL_FEDORA_9.txt
-Installation
-----------
-It is recommended to use a clean (fresh) Fedora install. Then follow the steps below to setup your server with ISPConfig 3:
-Installation of some basic requirements:
-rpm --import /etc/pki/rpm-gpg/RPM-GPG-KEY*
-yum update
-yum groupinstall 'Development Tools'
-yum groupinstall 'Development Libraries'
-You should disable selinux now, as some programs will not start when selinux is enabled:
-vi /etc/selinux/config
-and set:
-SELINUX=disabled
-then reboot the server.
-1) Install Postfix, Courier, Saslauthd, MySQL, phpMyAdmin with the following command line (on one line!):
-yum install ntp httpd mysql-server php php-mysql php-mbstring rpm-build gcc mysql-devel openssl-devel cyrus-sasl-devel pkgconfig zlib-devel phpMyAdmin pcre-devel openldap-devel postgresql-devel expect libtool-ltdl-devel openldap-servers libtool gdbm-devel pam-devel gamin-devel getmail
-useradd -m -s /bin/bash compileuser
-passwd compileuser
-visudo
-## Allow root to run any commands anywhere
-root    ALL=(ALL)       ALL
-compileuser   ALL=(ALL)       ALL
-su compileuser
-mkdir $HOME/rpm
-mkdir $HOME/rpm/SOURCES
-mkdir $HOME/rpm/SPECS
-mkdir $HOME/rpm/BUILD
-mkdir $HOME/rpm/SRPMS
-mkdir $HOME/rpm/RPMS
-mkdir $HOME/rpm/RPMS/i386
-echo "%_topdir $HOME/rpm" >> $HOME/.rpmmacros
-wget http://prdownloads.sourceforge.net/courier/courier-authlib-0.61.0.tar.bz2
-wget http://prdownloads.sourceforge.net/courier/courier-imap-4.4.1.tar.bz2
-wget http://prdownloads.sourceforge.net/courier/maildrop-2.0.4.tar.bz2
-sudo rpmbuild -ta courier-authlib-0.61.0.tar.bz2
-sudo rpm -ivh /home/compileuser/rpm/RPMS/i386/courier-authlib-0.61.0-1.fc9.i386.rpm
-sudo rpm -ivh /home/compileuser/rpm/RPMS/i386/courier-authlib-mysql-0.61.0-1.fc9.i386.rpm
-sudo rpm -ivh /home/compileuser/rpm/RPMS/i386/courier-authlib-devel-0.61.0-1.fc9.i386.rpm
-rpmbuild -ta courier-imap-4.4.1.tar.bz2
-sudo rpm -ivh /home/compileuser/rpm/RPMS/i386/courier-imap-4.4.1-1.9.i386.rpm
-sudo rpmbuild -ta maildrop-2.0.4.tar.bz2
-sudo rpm -ivh /home/compileuser/rpm/RPMS/i386/maildrop-2.0.4-1.9.i386.rpm
-exit
-yum install postfix
-chkconfig --levels 235 mysqld on
-/etc/init.d/mysqld start
-chkconfig --levels 235 httpd on
-/etc/init.d/httpd start
-chkconfig --levels 235 courier-authlib on
-/etc/init.d/courier-authlib start
-chkconfig --levels 235 sendmail off
-chkconfig --levels 235 postfix on
-chkconfig --levels 235 saslauthd on
-/etc/init.d/sendmail stop
-/etc/init.d/postfix start
-/etc/init.d/saslauthd start
-chkconfig --levels 235 courier-imap on
-/etc/init.d/courier-authlib restart
-/etc/init.d/courier-imap restart
-Set the mysql database password:
-mysqladmin -u root password yourrootsqlpassword
-mysqladmin -h ispconfig.local -u root password yourrootsqlpassword
-2) Install Amavisd-new, Spamassassin and Clamav (1 line!):
-yum install amavisd-new spamassassin clamav clamav-data clamav-server clamav-update unzip bzip2 unrar
-chkconfig --levels 235 amavisd on
-chkconfig --levels 235 clamd.amavisd on
-/usr/bin/freshclam
-/etc/init.d/amavisd start
-/etc/init.d/clamd.amavisd start
-3) Install apache, PHP5 and phpmyadmin (1 line!):
-yum install php php-devel php-gd php-imap php-ldap php-mysql php-odbc php-pear php-xml php-xmlrpc php-eaccelerator php-magickwand php-magpierss php-mapserver php-mbstring php-mcrypt php-mhash php-mssql php-shout php-snmp php-soap php-tidy curl curl-devel perl-libwww-perl ImageMagick libxml2 libxml2-devel phpmyadmin
-4) Install pure-ftpd and quota
-yum install pure-ftpd quota
-chkconfig --levels 235 pure-ftpd on
-5) Install mydns
-rpm -i http://mydns.bboy.net/download/mydns-mysql-1.1.0-1.i386.rpm
-chkconfig --levels 235 mydns on
-6) Install vlogger and webalizer
-yum install webalizer perl-DateTime-Format-HTTP perl-DateTime-Format-Builder
-cd /tmp
-wget http://n0rp.chemlab.org/vlogger/vlogger-1.3.tar.gz
-tar xvfz vlogger-1.3.tar.gz
-mv vlogger-1.3/vlogger /usr/sbin/
-rm -rf vlogger*
-7) Configure the firewall
-Now you should switch off the firewall by running:
-system-config-firewall-tui
-ISPConfig comes with a iptables bsed firewall script that can be meneged from within the ispconfig interface.
-8) Install ISPConfig 3
-There are two possile scenarios, but not both:
-8.1) Install the latest released version 
-8.2) Install directly from SVN
-8.1) Installation of beta 3 from tar.gz
-  cd /tmp
-  wget http://www.ispconfig.org/downloads/ISPConfig-3.0.0.9-rc2.tar.gz
-  tar xvfz ISPConfig-3.0.0.9-rc2.tar.gz
-  cd ispconfig3_install/install/
-8.2) Installation from SVN
-  yum install subversion
-  cd /tmp
-  svn export svn://svn.ispconfig.org/ispconfig3/trunk/
-  cd trunk/install
-8.1+8.2) Now proceed with the ISPConfig installation.
-Now start the installation process by executing:
-php -q install.php
-The installer will configure all services like postfix, sasl, courier, etc. for you. A manual setup as required for ISPConfig 2 (perfect setup guides) is not nescessary. To login to the ISPConfig controlpanel, open the following URL in your browser (replace the IP to match your settings!):
-http://192.168.0.100:8080/
-the default login is:
-user: admin
-password: admin
-In case you get a permission denied error from apache, please restart the apache webserver process.
-Optional:
-Install a webbased Email Client
-yum install squirrelmail
----------------------------------------------------------------------------------------------------------
-Hints:
-debian 4.0 under openvz:
-VPSID=101
-for CAP in CHOWN DAC_READ_SEARCH SETGID SETUID NET_BIND_SERVICE NET_ADMIN SYS_CHROOT SYS_NICE CHOWN DAC_READ_SEARCH SETGID SETUID NET_BIND_SERVICE NET_ADMIN SYS_CHROOT SYS_NICE
-do
-  vzctl set $VPSID --capability ${CAP}:on --save
-done
----------------------------------------------------------------------------------------------------------
-Installing Jailkit:
-cd /tmp
-wget http://olivier.sessink.nl/jailkit/jailkit-2.5.tar.gz
-tar xvfz jailkit-2.5.tar.gz
-cd jailkit-2.5
-./configure
-make
-make install
-rm -rf jailkit-2.5*
--- a/docs/INSTALL_OPENSUSE_11.txt
+++ b/docs/INSTALL_OPENSUSE_11.txt
-Installation
-----------
-It is recommended to use a clean (fresh) OpenSUSE installatiom where you selected to install just the minimal packages. A Gnome or KDE desktop is not needed and will just slow down the server. Then follow the steps below to setup your server with ISPConfig 3:
-Install some basic packes and the compilers that we need later
-yast2 -i findutils readline libgcc glibc-devel findutils-locate gcc flex lynx compat-readline4 db-devel wget gcc-c++ make vim telnet cron iptables iputils man man-pages
-1) Install Postfix, Courier, Saslauthd, MySQL, phpMyAdmin with the following command line (on one line!):
-yast2 -i postfix postfix-mysql mysql mysql-client phpMyAdmin courier-imap courier-authlib courier-authlib-mysql python cron cyrus-sasl cyrus-sasl-crammd5 cyrus-sasl-digestmd5 cyrus-sasl-gssapi cyrus-sasl-otp cyrus-sasl-plain cyrus-sasl-saslauthd libmysqlclient-devel
-chkconfig --add mysql
-/etc/init.d/mysql start
-chkconfig --add postfix
-/etc/init.d/postfix start
-chkconfig --add saslauthd
-/etc/init.d/saslauthd start
-chkconfig --add saslauthd
-/etc/init.d/saslauthd start
-chkconfig --add fam
-chkconfig --add courier-authdaemon
-chkconfig --add courier-pop
-chkconfig --add courier-imap
-/etc/init.d/courier-pop start
-/etc/init.d/courier-imap start
-chkconfig --add courier-pop-ssl
-chkconfig --add courier-imap-ssl
-/etc/init.d/courier-pop-ssl start
-/etc/init.d/courier-imap-ssl start
-cd /tmp
-wget http://download.opensuse.org/repositories/server:/mail/openSUSE_11.0/i586/getmail-4.7.6-1.4.i586.rpm
-rpm -i getmail-4.7.6-1.4.i586.rpm
-// Warnings like "warning: getmail-4.7.6-1.4.i586.rpm: Header V3 DSA signature: NOKEY, key ID 367fe7fc" can be ignored.
-// Install maildrop
-rpm --force -i http://download.opensuse.org/repositories/home%3A/cboltz/openSUSE_10.3/i586/maildrop-2.0.3-16.1.i586.rpm
-// Install pam_mysql
-yast2 -i pam-devel
-cd /tmp
-wget http://heanet.dl.sourceforge.net/sourceforge/pam-mysql/pam_mysql-0.7RC1.tar.gz
-tar xvfz pam_mysql-0.7RC1.tar.gz
-cd pam_mysql-0.7RC1
-./configure
-make
-make install
-rm -rf pam_mysql-0.7RC1
-rm pam_mysql-0.7RC1.tar.gz
-// Set the mysql database password:
-mysqladmin -u root password yourrootsqlpassword
-mysqladmin -h ispconfig.local -u root password yourrootsqlpassword
-2) Install Amavisd-new, Spamassassin and Clamav (1 line!):
-yast2 -i amavisd-new clamav clamav-db zoo unzip unrar bzip2 unarj perl-DBD-mysql
-chkconfig --add amavis
-chkconfig --add clamd
-/etc/init.d/amavis start
-/etc/init.d/clamd start
-3) Install PHP5 modules (1 line!):
-yast2 -i php5-bcmath php5-bz2 php5-calendar php5-ctype php5-curl php5-dbase php5-dom php5-ftp php5-gd php5-gettext php5-gmp php5-iconv php5-imap php5-ldap php5-mbstring php5-mcrypt php5-mysql php5-ncurses php5-odbc php5-openssl php5-pcntl php5-pgsql php5-posix php5-shmop php5-snmp php5-soap php5-sockets php5-sqlite php5-sysvsem php5-tokenizer php5-wddx php5-xmlrpc php5-xsl php5-zlib php5-exif php5-fastcgi php5-pear php5-sysvmsg php5-sysvshm ImageMagick curl
-Then run the following to enable the Apache modules:
-a2enmod suexec
-a2enmod rewrite
-a2enmod ssl
-a2enmod actions
-chkconfig --add apache2
-/etc/init.d/apache2 start
-4) Install pure-ftpd and quota
-yast2 -i pure-ftpd quota
-// The current pure-ftpd package from SuSE is unstable and segfaults when a file is uploaded, 
-// we will replace it with a manually compiled package now:
-cd /tmp
-wget http://download.pureftpd.org/pub/pure-ftpd/releases/pure-ftpd-1.0.21.tar.gz
-tar xvfz pure-ftpd-1.0.21.tar.gz
-cd pure-ftpd-1.0.21/
-./configure --sysconfdir=/etc/pure-ftpd --with-everything --with-mysql
-make
-make install
-mv /usr/sbin/pure-ftpd /usr/sbin/pure-ftpd.suse
-ln -s /usr/local/sbin/pure-ftpd /usr/sbin/pure-ftpd
-rm -rf pure-ftpd-1.0.21
-rm -f pure-ftpd-1.0.21.tar.gz
-chkconfig --add pure-ftpd
-/etc/init.d/pure-ftpd start
-5) Install mydns
-cd /tmp
-wget ftp://ftp.pbone.net/mirror/ftp5.gwdg.de/pub/opensuse/repositories/server:/dns/SUSE_Factory/i586/mydns-mysql-1.1.0-3.72.i586.rpm
-wget ftp://ftp.pbone.net/mirror/ftp5.gwdg.de/pub/opensuse/repositories/server:/dns/SUSE_Factory/i586/mydns-1.1.0-3.72.i586.rpm
-rpm -i mydns*.rpm
-rm -rf /tmp/mydns*
-chkconfig --add mydns
-6) Install vlogger and webalizer
-cd /tmp
-wget http://n0rp.chemlab.org/vlogger/vlogger-1.3.tar.gz
-tar xvfz vlogger-1.3.tar.gz
-mv vlogger-1.3/vlogger /usr/sbin/
-rm -rf vlogger*
-yast2 -i webalizer perl-DateManip
-7) Install ISPConfig 3
-There are two possile scenarios, but not both:
-7.1) Install the latest released version 
-7.2) Install directly from SVN
-7.1) Installation of beta 3 from tar.gz
-  cd /tmp
-  wget http://www.ispconfig.org/downloads/ISPConfig-3.0.0.9-rc2.tar.gz
-  tar xvfz ISPConfig-3.0.0.9-rc2.tar.gz
-  cd ispconfig3_install/install/
-7.2) Installation from SVN
-  yast2 -i subversion
-  cd /tmp
-  svn export svn://svn.ispconfig.org/ispconfig3/trunk/
-  cd trunk/install
-7.1+7.2) Now proceed with the ISPConfig installation.
-Now start the installation process by executing:
-php -q install.php
-The installer will configure all services like postfix, sasl, courier, etc. for you. A manual setup as required for ISPConfig 2 (perfect setup guides) is not nescessary. To login to the ISPConfig controlpanel, open the following URL in your browser (replace the IP to match your settings!):
-http://192.168.0.100:8080/
-the default login is:
-user: admin
-password: admin
-In case you get a permission denied error from apache, please restart the apache webserver process.
-Optional:
-Install a webbased Email Client
-yast2 -i squirrelmail
----------------------------------------------------------------------------------------------------------
-Hints:
-debian 4.0 under openvz:
-VPSID=101
-for CAP in CHOWN DAC_READ_SEARCH SETGID SETUID NET_BIND_SERVICE NET_ADMIN SYS_CHROOT SYS_NICE CHOWN DAC_READ_SEARCH SETGID SETUID NET_BIND_SERVICE NET_ADMIN SYS_CHROOT SYS_NICE
-do
-  vzctl set $VPSID --capability ${CAP}:on --save
-done
----------------------------------------------------------------------------------------------------------
-Installing Jailkit:
-cd /tmp
-wget http://olivier.sessink.nl/jailkit/jailkit-2.5.tar.gz
-tar xvfz jailkit-2.5.tar.gz
-cd jailkit-2.5
-./configure
-make
-make install
-rm -rf jailkit-2.5*
--- a/docs/INSTALL_OPENSUSE_11_1.txt
+++ b/docs/INSTALL_OPENSUSE_11_1.txt
-Installation
-----------
-It is recommended to use a clean (fresh) OpenSUSE installatiom where you selected to install just the minimal packages. A Gnome or KDE desktop is not needed and will just slow down the server. Then follow the steps below to setup your server with ISPConfig 3:
-The following guide is for the 32Bit version of openSUSE, for 64Bit installations the package names may differ especially the names of downloaded rpm files.
-Install some basic packes and the compilers that we need later
-yast2 -i findutils readline libgcc glibc-devel findutils-locate gcc flex lynx compat-readline4 db-devel wget gcc-c++ make vim telnet cron iptables iputils man man-pages nano pico
-1) Install Postfix, Courier, Saslauthd, MySQL with the following command line (on one line!):
-yast2 -i postfix postfix-mysql mysql mysql-client courier-imap courier-authlib courier-authlib-mysql python cron cyrus-sasl cyrus-sasl-crammd5 cyrus-sasl-digestmd5 cyrus-sasl-gssapi cyrus-sasl-otp cyrus-sasl-plain cyrus-sasl-saslauthd libmysqlclient-devel
-chkconfig --add mysql
-/etc/init.d/mysql start
-chkconfig --add postfix
-/etc/init.d/postfix start
-chkconfig --add saslauthd
-/etc/init.d/saslauthd start
-chkconfig --add saslauthd
-/etc/init.d/saslauthd start
-chkconfig --add fam
-chkconfig --add courier-authdaemon
-chkconfig --add courier-pop
-chkconfig --add courier-imap
-/etc/init.d/courier-pop start
-/etc/init.d/courier-imap start
-chkconfig --add courier-pop-ssl
-chkconfig --add courier-imap-ssl
-/etc/init.d/courier-pop-ssl start
-/etc/init.d/courier-imap-ssl start
-cd /tmp
-wget http://download.opensuse.org/repositories/server:/mail/openSUSE_11.0/i586/getmail-4.7.6-1.4.i586.rpm
-rpm -i getmail-4.7.6-1.4.i586.rpm
-// Install maildrop
-wget http://download.opensuse.org/repositories/home:/atzewilms/openSUSE_11.1_Update/i586/maildrop-2.0.4-10.5.i586.rpm
-rpm --force -i maildrop-2.0.4-10.5.i586.rpm
-// Install pam_mysql
-yast2 -i pam-devel
-cd /tmp
-wget http://heanet.dl.sourceforge.net/sourceforge/pam-mysql/pam_mysql-0.7RC1.tar.gz
-tar xvfz pam_mysql-0.7RC1.tar.gz
-cd pam_mysql-0.7RC1
-./configure
-make
-make install
-rm -rf /tmp/pam_mysql-0.7RC1
-rm /tmp/pam_mysql-0.7RC1.tar.gz
-// Set the mysql database password:
-mysql_secure_installation
-2) Install Amavisd-new, Spamassassin and Clamav (1 line!):
-yast2 -i amavisd-new clamav clamav-db zoo unzip unrar bzip2 unarj perl-DBD-mysql
-chkconfig --add amavis
-chkconfig --add clamd
-/etc/init.d/amavis start
-/etc/init.d/clamd start
-2.1) Install apache2
-yast2 -i apache2 apache2-mod_fcgid
-rpm -i http://download.opensuse.org/repositories/server:/php/server_database_apache_openSUSE_11.0/i586/suphp-0.6.2-10.41.i586.rpm
-3) Install PHP5 modules (1 line!):
-yast2 -i php5-bcmath php5-bz2 php5-calendar php5-ctype php5-curl php5-dbase php5-dom php5-ftp php5-gd php5-gettext php5-gmp php5-iconv php5-imap php5-ldap php5-mbstring php5-mcrypt php5-mysql php5-ncurses php5-odbc php5-openssl php5-pcntl php5-pgsql php5-posix php5-shmop php5-snmp php5-soap php5-sockets php5-sqlite php5-sysvsem php5-tokenizer php5-wddx php5-xmlrpc php5-xsl php5-zlib php5-exif php5-fastcgi php5-pear php5-sysvmsg php5-sysvshm ImageMagick curl apache2-mod_php5
-Then run the following to enable the Apache modules:
-a2enmod suexec
-a2enmod rewrite
-a2enmod ssl
-a2enmod actions
-a2enmod suphp
-a2enmod fcgid
-// Fix a suexec permission problem
-chown root:www /usr/sbin/suexec2
-chmod 4755 /usr/sbin/suexec2
-// and start apache
-chkconfig --add apache2
-/etc/init.d/apache2 start
-cd /tmp
-yast2 -i pwgen
-rpm -i http://download.opensuse.org/repositories/server:/php:/applications/openSUSE_11.1/noarch/phpMyAdmin-3.1.2-1.1.noarch.rpm
-ln -s /srv/www/htdocs/phpMyAdmin /usr/local/ispconfig/interface/web/phpmyadmin
-// Warnings like "warning: phpMyAdmin-3.1.2-1.1.src.rpm: Header V3 DSA signature: NOKEY, key ID 367fe7fc" can be ignored.
-4) Install pure-ftpd and quota
-yast2 -i pure-ftpd quota
-chkconfig --add pure-ftpd
-/etc/init.d/pure-ftpd start
-5) Install mydns
-cd /tmp
-wget http://download.opensuse.org/repositories/home:/bajizs_cnt/openSUSE_11.1/i586/mydns-ng-1.2.8-1.1.i586.rpm
-wget http://download.opensuse.org/repositories/home:/bajizs_cnt/openSUSE_11.1/i586/mydns-ng-mysql-1.2.8-1.1.i586.rpm
-rpm -i mydns*.rpm
-chkconfig --add mydns
-6) Install vlogger and webalizer
-cd /tmp
-wget http://n0rp.chemlab.org/vlogger/vlogger-1.3.tar.gz
-tar xvfz vlogger-1.3.tar.gz
-mv vlogger-1.3/vlogger /usr/sbin/
-rm -rf vlogger*
-yast2 -i webalizer perl-DateManip 
-6.1 Install fail2ban
-rpm -i http://download.opensuse.org/repositories/home:/leonardocf/openSUSE_11.0/i586/fail2ban-0.8.2-5.2.i586.rpm
-6.2) Cleanup
-rm -f /tmp/*.rpm
-6.2 Install jailkit
-cd /tmp
-wget http://olivier.sessink.nl/jailkit/jailkit-2.5.tar.gz
-tar xvfz jailkit-2.5.tar.gz
-cd jailkit-2.5
-./configure
-make
-make install
-cd ..
-rm -rf jailkit-2.5*
-7) Install ISPConfig 3
-There are two possile scenarios, but not both:
-7.1) Install the latest released version 
-7.2) Install directly from SVN
-7.1) Installation of beta 3 from tar.gz
-  cd /tmp
-  wget http://www.ispconfig.org/downloads/ISPConfig-3.0.0.9-rc2.tar.gz
-  tar xvfz ISPConfig-3.0.0.9-rc2.tar.gz
-  cd ispconfig3_install/install/
-7.2) Installation from SVN
-  yast2 -i subversion
-  cd /tmp
-  svn export svn://svn.ispconfig.org/ispconfig3/trunk/
-  cd trunk/install
-7.1+7.2) Now proceed with the ISPConfig installation.
-Now start the installation process by executing:
-php -q install.php
-// Cleanup
-rm -rf /tmp/trunk
-The installer will configure all services like postfix, sasl, courier, etc. for you. A manual setup as required for ISPConfig 2 (perfect setup guides) is not nescessary. To login to the ISPConfig controlpanel, open the following URL in your browser (replace the IP to match your settings!):
-http://192.168.0.100:8080/
-the default login is:
-user: admin
-password: admin
-In case you get a permission denied error from apache, please restart the apache webserver process.
-Optional:
-Install a webbased Email Client
-yast2 -i squirrelmail
--- a/docs/INSTALL_UBUNTU_7.10.txt
+++ b/docs/INSTALL_UBUNTU_7.10.txt
-Installation
-----------
-It is recommended to use a clean (fresh) Ubuntu 7.10 (Gutsy Gibbon) install where you selected no additional packages or servers during setup. Then follow the steps below to setup your server with ISPConfig 3:
-Now become root user by executing:
-sudo su
-and entering the password of the user that you created during setup.
-Edit the file /etc/apt/sources.list and comment out the line beginning with "deb cdrom:....", then run:
-apt-get update
-apt-get -u upgrade
-1) Install Postfix, Courier, Saslauthd, MySQL, phpMyAdmin with the following command line (on one line!):
-apt-get install postfix postfix-mysql postfix-doc mysql-client mysql-server courier-authdaemon courier-authlib-mysql courier-pop courier-pop-ssl courier-imap courier-imap-ssl postfix-tls libsasl2-2 libsasl2-modules libsasl2-modules-sql sasl2-bin libpam-mysql openssl courier-maildrop getmail4
-Answer the questions from the package manager as follows.
-Create directories for web-based administration ? <-- No
-General type of configuration? <-- Internet site
-Mail name? <-- server1.mydomain.tld
- SSL certificate required <-- Ok
-...use your own domain name of course ;)
-2) Install Amavisd-new, Spamassassin and Clamav (1 line!):
-apt-get install amavisd-new spamassassin clamav clamav-daemon zoo unzip bzip2 arj nomarch lzop cabextract apt-listchanges libnet-ldap-perl libauthen-sasl-perl clamav-docs daemon libio-string-perl libio-socket-ssl-perl libnet-ident-perl zip libnet-dns-perl
-3) Install apache, PHP5 and phpmyadmin (1 line!):
-apt-get install apache2 apache2.2-common apache2-doc apache2-mpm-prefork apache2-utils libexpat1 ssl-cert libapache2-mod-php5 php5 php5-common php5-gd php5-mysql php5-imap phpmyadmin php5-cli
-Then run the following to enable the Apache modules:
-a2enmod suexec
-a2enmod rewrite
-a2enmod ssl
-a2enmod actions
-a2enmod include
-4) Install pure-ftpd and quota
-First we have to make sure that the capability module is loaded in the kernel
-modprobe capability
-echo 'capability' >> /etc/modules
-Then we install pureftpd and quota.
-apt-get install pure-ftpd-common pure-ftpd-mysql quota quotatool
-echo 'yes' > /etc/pure-ftpd/conf/DontResolve
-5) Install mydns
-apt-get install mydns-mysql
-The mydns installer is a bit tricky, you will have to select to create a new database for mydns and use a existing mysql user, e.g. the mysql root user. This database is only to fullfill the requirements for the debian pacakge during installation and will not be used by ISPConfig later. ISPConfig will automatically change the mydns configuration files to use the ISPConfig database.
-6) Install vlogger and webalizer
-apt-get install vlogger webalizer
-7) Install ISPConfig 3
-There are two possile scenarios, but not both:
-1) Install the latest alpha 
-2) Install directly from SVN
-apt-get install php5-cli
-1) Installation of beta 3
-  cd /tmp
-  wget http://www.ispconfig.org/downloads/ISPConfig_3.0.0.9-rc2.tar.gz
-  tar xvfz ISPConfig_3.0.0.9-rc2.tar.gz
-  cd ispconfig3_install/install/
-2) Installation from SVN
-  apt-get install subversion
-  cd /tmp
-  svn export svn://svn.ispconfig.org/ispconfig3/trunk/
-  cd trunk/install
-1+2) Now proceed with the ISPConfig installation.
-Now start the installation process by executing:
-php -q install.php
-The installer will configure all services like postfix, sasl, courier, etc. for you. A manual setup as required for ISPConfig 2 (perfect setup guides) is not nescessary. To login to the ISPConfig controlpanel, open the following URL in your browser (replace the IP to match your settings!):
-http://192.168.0.100:8080/
-the default login is:
-user: admin
-password: admin
-In case you get a permission denied error from apache, please restart the apache webserver process.
--- a/docs/INSTALL_UBUNTU_8.04.txt
+++ b/docs/INSTALL_UBUNTU_8.04.txt
-===============================================================================
-Installation
-===============================================================================
-It is recommended to use a clean (fresh) Ubuntu 8.04 LTS install where you selected no additional packages or servers during setup. Then follow the steps below to setup your server with ISPConfig 3:
-1) Prepare your OS
-*******************************************************************************
-Become root user by executing:
-___
-sudo su
-___
-and entering the password of the user that you created during setup.
-Edit the file /etc/apt/sources.list and comment out the line beginning with "deb cdrom:....", then run:
-___
-apt-get update
-apt-get -u upgrade
-___
-1.1) Change The Default Shell
-*******************************************************************************
-There are alway Shell-Scripts which are not POSIX-compatible and only run when using BASH instead of DASH!
-___
-sudo dpkg-reconfigure dash
-                           <-- ANSWER WITH: No
-___
-1.1) Install some software
-*******************************************************************************
-___
-apt-get install wget
-___
-2) Install Postfix, Courier, Saslauthd, MySQL, phpMyAdmin
-*******************************************************************************
-(1 line!)
-___
-apt-get install postfix postfix-mysql postfix-doc mysql-client mysql-server courier-authdaemon courier-authlib-mysql courier-pop courier-pop-ssl courier-imap courier-imap-ssl libsasl2-2 libsasl2-modules libsasl2-modules-sql sasl2-bin libpam-mysql openssl courier-maildrop getmail4
-___
-Answer the questions from the package manager as follows.
-Enter the mysql root password. <-- Enter your mysql-root Password
-Create directories for web-based administration ? <-- No
-General type of configuration? <-- Internet site
-Mail name? <-- server1.mydomain.tld
-SSL certificate required <-- Ok
-... use your own domain name of course ;)
-Authentication will be done by saslauthd. We have to change a few things to make it work properly. Because Postfix runs chrooted in /var/spool/postfix  we have to do the following:
-___
-echo 'pwcheck_method: saslauthd' >> /etc/postfix/sasl/smtpd.conf
-echo 'mech_list: plain login' >> /etc/postfix/sasl/smtpd.conf
-mkdir -p /var/spool/postfix/var/run/saslauthd
-___
-Now we have to edit /etc/default/saslauthd in order to activate saslauthd. Set
-###
-START=yes
-###
-and change the line OPTIONS="-c -m /var/run/saslauthd" to
-###
-OPTIONS="-c -m /var/spool/postfix/var/run/saslauthd -r"
-###
-Next add the postfix user to the sasl group (this makes sure that Postfix has the permission to access saslauthd):
-___
-adduser postfix sasl
-___
-Now restart Postfix and start saslauthd:
-___
-/etc/init.d/postfix restart
-/etc/init.d/saslauthd start
-___
-3) Install Amavisd-new, Spamassassin and Clamav
-*******************************************************************************
-(1 line!)
-___
-apt-get install amavisd-new spamassassin clamav clamav-daemon zoo unzip bzip2 arj nomarch lzop cabextract apt-listchanges libnet-ldap-perl libauthen-sasl-perl clamav-docs daemon libio-string-perl libio-socket-ssl-perl libnet-ident-perl zip libnet-dns-perl
-___
-4) Install apache, PHP5 and phpmyadmin
-*******************************************************************************
-(1 line!)
-___
-apt-get install apache2 apache2.2-common apache2-doc apache2-mpm-prefork apache2-utils libexpat1 ssl-cert libapache2-mod-php5 php5 php5-common php5-gd php5-mysql php5-imap phpmyadmin php5-cli
-___
-Then run the following to enable the Apache modules:
-___
-a2enmod suexec
-a2enmod rewrite
-a2enmod ssl
-a2enmod include
-a2enmod actions
-a2enmod headers
-___
-4.1) Optional: Install SuPHP
-*******************************************************************************
-___
-apt-get install libapache2-mod-suphp
-vi /etc/suphp/suphp.conf
-___
-set docroot to:
-###
-docroot=/var/www/clients
-###
-Change: application/x-httpd-php=php:/usr/bin/php-cgi to:
-###
-x-httpd-php=php:/usr/bin/php-cgi
-###
-4.2) Optional: Install Fast-CGI
-*******************************************************************************
-___
-apt-get install libapache2-mod-fcgid
-___
-5) Install pure-ftpd and quota
-*******************************************************************************
-___
-apt-get install pure-ftpd-common pure-ftpd-mysql quota quotatool
-echo 'yes' > /etc/pure-ftpd/conf/DontResolve
-___
-6) Install mydns
-*******************************************************************************
-___
-apt-get install g++ libc6 gcc gawk make texinfo libmysqlclient15-dev
-cd /tmp
-wget http://heanet.dl.sourceforge.net/sourceforge/mydns-ng/mydns-1.2.8.15.tar.gz
-tar xvfz mydns-1.2.8.15.tar.gz
-cd mydns-1.2.8
-./configure
-make
-make install
-___
-Now create the start / stop script for mydns:
-___
-vi /etc/init.d/mydns
-___
-and enter the following lines (between the "---"-lines):
-------------------------------------------------------------------------------
-#! /bin/bash
-#
-# mydns         Start the MyDNS server
-#
-# Author:       Philipp Kern <phil@philkern.de>.
-#               Based upon skeleton 1.9.4 by Miquel van Smoorenburg
-#               <miquels@cistron.nl> and Ian Murdock <imurdock@gnu.ai.mit.edu>.
-#
-set -e
-PATH=/usr/local/sbin:/usr/local/bin:/sbin:/bin:/usr/sbin:/usr/bin
-DAEMON=/usr/local/sbin/mydns
-NAME=mydns
-DESC="DNS server"
-SCRIPTNAME=/etc/init.d/$NAME
-# Gracefully exit if the package has been removed.
-test -x $DAEMON || exit 0
-case "$1" in
-  start)
-        echo -n "Starting $DESC: $NAME"
-        start-stop-daemon --start --quiet \
-                --exec $DAEMON -- -b
-        echo "."
-        ;;
-  stop)
-        echo -n "Stopping $DESC: $NAME"
-        start-stop-daemon --stop --oknodo --quiet \
-                --exec $DAEMON
-        echo "."
-        ;;
-  reload|force-reload)
-        echo -n "Reloading $DESC configuration ..."
-        start-stop-daemon --stop --signal HUP --quiet \
-                --exec $DAEMON
-        echo "done."
-        ;;
-  restart)
-        echo -n "Restarting $DESC: $NAME"
-        start-stop-daemon --stop --quiet --oknodo \
-                --exec $DAEMON
-        sleep 1
-        start-stop-daemon --start --quiet \
-                --exec $DAEMON -- -b
-        echo "."
-        ;;
-  *)
-        echo "Usage: $SCRIPTNAME {start|stop|restart|reload|force-reload}" >&2
-        exit 1
-        ;;
-esac
-exit 0
-------------------------------------------------------------------------------
-now execute:
-___
-chmod +x /etc/init.d/mydns
-update-rc.d mydns defaults
-___
-7) Install vlogger, webalizer and firewall
-*******************************************************************************
-___
-apt-get install vlogger webalizer bastille
-___
-7.1) OPTIONAL: Installing Jailkit
-*******************************************************************************
-___
-apt-get install build-essential autoconf automake1.9 libtool flex bison debhelper
-cd /tmp
-wget http://olivier.sessink.nl/jailkit/jailkit-2.7.tar.gz
-tar xvfz jailkit-2.7.tar.gz
-cd jailkit-2.7
-./debian/rules binary
-cd ..
-dpkg -i jailkit_2.7-1_i386.deb
-rm -rf jailkit-2.7*
-___
-8) Install ISPConfig 3
-*******************************************************************************
-There are two possile scenarios a) or b), but not both:
-a) Installation of beta 3
-___
-cd /tmp
-wget http://www.ispconfig.org/downloads/ISPConfig-3.0.0.9-rc2.tar.gz
-tar xvfz ISPConfig_3.0.0.9-rc2.tar.gz
-cd ispconfig3_install/install/
-___
-b) Installation from SVN
-___
-apt-get install subversion
-cd /tmp
-svn export svn://svn.ispconfig.org/ispconfig3/trunk/
-cd trunk/install
-___
-after a) or b)
-proceed with the ISPConfig installation. Now start the installation process by executing:
-___
-php -q install.php
-___
-The installer will configure all services like postfix, sasl, courier, etc. for you. A manual setup as required for ISPConfig 2 (perfect setup guides) is not nescessary. To login to the ISPConfig controlpanel, open the following URL in your browser (replace the IP to match your settings!):
-http://server1.mydomain.tld:8080/
-the default login is:
-user: admin
-password: admin
-In case you get a permission denied error from apache, please restart the apache webserver process.
-8) Further Configuration-Tips
-*******************************************************************************
-8.1) Apache
-*******************************************************************************
-edit /etc/apache2/sites-available/default
-change the first lines to match your system.
-Replace 0.0.0.0 with your IP.
-Change Document root to /var/www/apache2-default/
-This directory is now the standard-hompage for your Server.
-###
-NameVirtualHost 0.0.0.0:80
-<VirtualHost 0.0.0.0:80>
-	ServerAdmin webmaster@localhost
-	DocumentRoot /var/www/apache2-default/
-###
-8.2) Postfix - Aliases
-*******************************************************************************
-change /etc/aliases
-###
-# See man 5 aliases for format
-postmaster:    root
-clamav: root
-root: webmaster@yourdomain.tld
-###
-Then run:
-___
-newaliases
-___
-8.3) Php.ini
-*******************************************************************************
-I changed the following in the php.ini-Files in the following directorys:
-/etc/php5/apache2/
-/etc/php5/cgi/
-/etc/php5/cli/
-It is important to search the following parameters in the php.ini and replace them!!!
-Don't just copy the whole stuff to the end of the file.
-###
-memory_limit = 64M      ; Maximum amount of memory a script may consume (16MB)
-display_errors = Off
-log_errors = On
-upload_max_filesize = 32M
-allow_url_fopen = On
-allow_url_include = On
-date.timezone = Europe/Berlin
-extension = imap.so
-extension = mcrypt.so
-;Typo3 fast-cgi PHP5 bug fix
-cgi.fix_pathinfo = 0
-###
-add to the end of the file:
-###
-[htscanner]
-Extension = "htscanner.so"
-config_file = ".htaccess"
-default_docroot = "/var/www"
-###
-9) Additional Software
-*******************************************************************************
-9.1) NTP, Denyhosts
-*******************************************************************************
-__
-apt-get install ntp denyhosts
-__
-in /etc/ntp.conf replace the server-line with:
-###
-server 0.pool.ntp.org
-server 1.pool.ntp.org
-server 2.pool.ntp.org
-###
-9.2) Typo3 - typo3.org
-*******************************************************************************
-___
-apt-get install imagemagick php5-gd php5-imagick gs gs-esp
-___
-There is a bug in the php5-library under Ubuntu 8.04. You can fix it by changing "cgi.fix_pathinfo = 0" in the php.ini. Look at 8.4).
-10.2) Horde (Webmail) - horde.org
-*******************************************************************************
-First of all, install the horde3 and Imp4 packages (Ubuntu/Debian)
-___
-apt-get install horde3 imp4 gollem kronolith2 mnemo2 nag2 turba2
-pear install --onlyreqdeps Log Mail Mail_Mime MDB2 File Date
-___
-It is then necessary to setup an Alias for Apache. 
-If you want horde only on single pages, that are created with ispc3:
-Add the following line to ISPConfig->Sites->Web Domain->Options->Apache directives
-If you want to access webmail on all pages add the following line to /etc/apache2/apache2.conf
-###
-Alias /horde3 /usr/share/horde3
-###
-Allow Apache to write horde configuration files :
-___
-chown -R www-data:www-data /etc/horde
-___
-Important parameters to change are (in Horde setup) :
-###
-Horde URL (change it to /horde3)
-Enable Database Access. Do Not use MySQL Improved (4+), my attempts at using it failed. MySQL Standard runs fine however
-Enable Authentication. I recommend IMAP authentication (something like {localhost:143/imap/notls}. Do not forget the /notls, not specifying failed on my setup). Also make sure to add your username to the list of Administrators, otherwise, you won’t have access to horde/imp4 parameters. Using anything else than IMAP seeemed to fail on my setup
-Generate the configuration
-Horde should now be setup. You now have to configure imp4
-generate a configuration using the horde administration panel
-modify the /etc/horde/imp4/servers.php file. Instruction are given inside the file concerning the syntax. If you run Courier-IMAP, and want Imp to automatically authenticate using horde credentials :
-$servers[’imap’] = array(
-‘name’ => ‘IMAP Server’,
-’server’ => ‘localhost’,
-‘hordeauth’ => true,
-‘protocol’ => ‘imap/notls’,
-‘port’ => 143,
-‘folders’ => ‘INBOX.’,
-‘namespace’ => ‘’,
-‘maildomain’ => ‘domain.com’,
-’smtphost’ => ‘localhost’,
-’smtpport’ => 25,
-‘realm’ => ‘’,
-‘preferred’ => ‘’,
-‘dotfiles’ => false,
-‘hierarchies’ => array()
-);
-###
-11) have fun and drink a cup of coffee
-*******************************************************************************
-:-)
--- a/docs/INSTALL_UBUNTU_8.10.txt
+++ b/docs/INSTALL_UBUNTU_8.10.txt
-===============================================================================
-Installation
-===============================================================================
-It is recommended to use a clean (fresh) Ubuntu 8.04 LTS install where you selected no additional packages or servers during setup. Then follow the steps below to setup your server with ISPConfig 3:
-1) Prepare your OS
-*******************************************************************************
-Become root user by executing:
-___
-sudo su
-___
-and entering the password of the user that you created during setup.
-Edit the file /etc/apt/sources.list and comment out the line beginning with "deb cdrom:....", then run:
-___
-apt-get update
-apt-get -u upgrade
-___
-1.1) Change The Default Shell
-*******************************************************************************
-There are alway Shell-Scripts which are not POSIX-compatible and only run when using BASH instead of DASH!
-___
-sudo dpkg-reconfigure dash
-                           <-- ANSWER WITH: No
-___
-1.1) Install some software
-*******************************************************************************
-___
-apt-get install wget
-___
-2) Install Postfix, Courier, Saslauthd, MySQL, phpMyAdmin
-*******************************************************************************
-(1 line!)
-___
-apt-get install postfix postfix-mysql postfix-doc mysql-client mysql-server courier-authdaemon courier-authlib-mysql courier-pop courier-pop-ssl courier-imap courier-imap-ssl libsasl2-2 libsasl2-modules libsasl2-modules-sql sasl2-bin libpam-mysql openssl maildrop getmail4
-___
-Answer the questions from the package manager as follows.
-Enter the mysql root password. <-- Enter your mysql-root Password
-Create directories for web-based administration ? <-- No
-General type of configuration? <-- Internet site
-Mail name? <-- server1.mydomain.tld
-SSL certificate required <-- Ok
-... use your own domain name of course ;)
-Authentication will be done by saslauthd. We have to change a few things to make it work properly. Because Postfix runs chrooted in /var/spool/postfix  we have to do the following:
-___
-echo 'pwcheck_method: saslauthd' >> /etc/postfix/sasl/smtpd.conf
-echo 'mech_list: plain login' >> /etc/postfix/sasl/smtpd.conf
-mkdir -p /var/spool/postfix/var/run/saslauthd
-chmod 4755 /var/run/courier/authdaemon
-___
-Now we have to edit /etc/default/saslauthd in order to activate saslauthd. Set
-###
-START=yes
-###
-and change the line OPTIONS="-c -m /var/run/saslauthd" to
-###
-OPTIONS="-c -m /var/spool/postfix/var/run/saslauthd -r"
-###
-Next add the postfix user to the sasl group (this makes sure that Postfix has the permission to access saslauthd):
-___
-adduser postfix sasl
-___
-Now restart Postfix and start saslauthd:
-___
-/etc/init.d/postfix restart
-/etc/init.d/saslauthd start
-___
-3) Install Amavisd-new, Spamassassin and Clamav
-*******************************************************************************
-(1 line!)
-___
-apt-get install amavisd-new spamassassin clamav clamav-daemon zoo unzip bzip2 arj nomarch lzop cabextract apt-listchanges libnet-ldap-perl libauthen-sasl-perl clamav-docs daemon libio-string-perl libio-socket-ssl-perl libnet-ident-perl zip libnet-dns-perl
-___
-4) Install apache, PHP5 and phpmyadmin
-*******************************************************************************
-(1 line!)
-___
-apt-get install apache2 apache2.2-common apache2-doc apache2-mpm-prefork apache2-utils libexpat1 ssl-cert libapache2-mod-php5 php5 php5-common php5-gd php5-mysql php5-imap phpmyadmin php5-cli
-___
-Then run the following to enable the Apache modules:
-___
-a2enmod suexec
-a2enmod rewrite
-a2enmod ssl
-a2enmod include
-a2enmod actions
-a2enmod headers
-___
-4.1) Optional: Install SuPHP
-*******************************************************************************
-___
-apt-get install libapache2-mod-suphp
-vi /etc/suphp/suphp.conf
-___
-set docroot to:
-###
-docroot=/var/clients
-###
-Change: application/x-httpd-php=php:/usr/bin/php-cgi to:
-###
-x-httpd-php=php:/usr/bin/php-cgi
-###
-4.2) Optional: Install Fast-CGI
-*******************************************************************************
-___
-apt-get install libapache2-mod-fcgid
-___
-5) Install pure-ftpd and quota
-*******************************************************************************
-___
-apt-get install pure-ftpd-common pure-ftpd-mysql quota quotatool
-echo 'yes' > /etc/pure-ftpd/conf/DontResolve
-___
-6) Install mydns
-*******************************************************************************
-___
-apt-get install g++ libc6 gcc gawk make texinfo libmysqlclient15-dev
-cd /tmp
-wget http://heanet.dl.sourceforge.net/sourceforge/mydns-ng/mydns-1.2.8.15.tar.gz
-tar xvfz mydns-1.2.8.15.tar.gz
-cd mydns-1.2.8
-./configure
-make
-make install
-___
-Now create the start / stop script for mydns:
-___
-vi /etc/init.d/mydns
-___
-and enter the following lines (between the "---"-lines):
-------------------------------------------------------------------------------
-#! /bin/bash
-#
-# mydns         Start the MyDNS server
-#
-# Author:       Philipp Kern <phil@philkern.de>.
-#               Based upon skeleton 1.9.4 by Miquel van Smoorenburg
-#               <miquels@cistron.nl> and Ian Murdock <imurdock@gnu.ai.mit.edu>.
-#
-set -e
-PATH=/usr/local/sbin:/usr/local/bin:/sbin:/bin:/usr/sbin:/usr/bin
-DAEMON=/usr/local/sbin/mydns
-NAME=mydns
-DESC="DNS server"
-SCRIPTNAME=/etc/init.d/$NAME
-# Gracefully exit if the package has been removed.
-test -x $DAEMON || exit 0
-case "$1" in
-  start)
-        echo -n "Starting $DESC: $NAME"
-        start-stop-daemon --start --quiet \
-                --exec $DAEMON -- -b
-        echo "."
-        ;;
-  stop)
-        echo -n "Stopping $DESC: $NAME"
-        start-stop-daemon --stop --oknodo --quiet \
-                --exec $DAEMON
-        echo "."
-        ;;
-  reload|force-reload)
-        echo -n "Reloading $DESC configuration ..."
-        start-stop-daemon --stop --signal HUP --quiet \
-                --exec $DAEMON
-        echo "done."
-        ;;
-  restart)
-        echo -n "Restarting $DESC: $NAME"
-        start-stop-daemon --stop --quiet --oknodo \
-                --exec $DAEMON
-        sleep 1
-        start-stop-daemon --start --quiet \
-                --exec $DAEMON -- -b
-        echo "."
-        ;;
-  *)
-        echo "Usage: $SCRIPTNAME {start|stop|restart|reload|force-reload}" >&2
-        exit 1
-        ;;
-esac
-exit 0
-------------------------------------------------------------------------------
-now execute:
-___
-chmod +x /etc/init.d/mydns
-update-rc.d mydns defaults
-___
-7) Install vlogger, webalizer and firewall
-*******************************************************************************
-___
-apt-get install vlogger webalizer bastille
-___
-7.1) OPTIONAL: Installing Jailkit
-*******************************************************************************
-___
-apt-get install build-essential autoconf automake1.9 libtool flex bison
-cd /tmp
-wget http://olivier.sessink.nl/jailkit/jailkit-2.5.tar.gz
-tar xvfz jailkit-2.5.tar.gz
-cd jailkit-2.5
-./configure
-make
-make install
-___
-8) Install ISPConfig 3
-*******************************************************************************
-There are two possile scenarios a) or b), but not both:
-a) Installation of beta 3
-___
-cd /tmp
-wget http://www.ispconfig.org/downloads/ISPConfig-3.0.0.9-rc2.tar.gz
-tar xvfz ISPConfig_3.0.0.9-rc2.tar.gz
-cd ispconfig3_install/install/
-___
-b) Installation from SVN
-___
-apt-get install subversion
-cd /tmp
-svn export svn://svn.ispconfig.org/ispconfig3/trunk/
-cd trunk/install
-___
-after a) or b)
-proceed with the ISPConfig installation. Now start the installation process by executing:
-___
-php -q install.php
-___
-The installer will configure all services like postfix, sasl, courier, etc. for you. A manual setup as required for ISPConfig 2 (perfect setup guides) is not nescessary. To login to the ISPConfig controlpanel, open the following URL in your browser (replace the IP to match your settings!):
-http://server1.mydomain.tld:8080/
-the default login is:
-user: admin
-password: admin
-In case you get a permission denied error from apache, please restart the apache webserver process.
-8) Further Configuration-Tips
-*******************************************************************************
-8.1) Apache
-*******************************************************************************
-edit /etc/apache2/sites-available/default
-change the first lines to match your system.
-Replace 0.0.0.0 with your IP.
-Change Document root to /var/www/apache2-default/
-This directory is now the standard-hompage for your Server.
-###
-NameVirtualHost 0.0.0.0:80
-<VirtualHost 0.0.0.0:80>
-	ServerAdmin webmaster@localhost
-	DocumentRoot /var/www/apache2-default/
-###
-8.2) Postfix - Aliases
-*******************************************************************************
-change /etc/aliases
-###
-# See man 5 aliases for format
-postmaster:    root
-clamav: root
-root: webmaster@yourdomain.tld
-###
-Then run:
-___
-newaliases
-___
-8.3) Php.ini
-*******************************************************************************
-I changed the following in the php.ini-Files in the following directorys:
-/etc/php5/apache2/
-/etc/php5/cgi/
-/etc/php5/cli/
-It is important to search the following parameters in the php.ini and replace them!!!
-Don't just copy the whole stuff to the end of the file.
-###
-memory_limit = 64M      ; Maximum amount of memory a script may consume (16MB)
-display_errors = Off
-log_errors = On
-upload_max_filesize = 32M
-allow_url_fopen = On
-allow_url_include = On
-date.timezone = Europe/Berlin
-extension = imap.so
-extension = mcrypt.so
-;Typo3 fast-cgi PHP5 bug fix
-cgi.fix_pathinfo = 0
-###
-add to the end of the file:
-###
-[htscanner]
-Extension = "htscanner.so"
-config_file = ".htaccess"
-default_docroot = "/var/www"
-###
-9) Additional Software
-*******************************************************************************
-9.1) NTP, Denyhosts
-*******************************************************************************
-__
-apt-get install ntp denyhosts
-__
-in /etc/ntp.conf replace the server-line with:
-###
-server 0.pool.ntp.org
-server 1.pool.ntp.org
-server 2.pool.ntp.org
-###
-9.2) Typo3 - typo3.org
-*******************************************************************************
-___
-apt-get install imagemagick php5-gd php5-imagick gs gs-esp
-___
-There is a bug in the php5-library under Ubuntu 8.04. You can fix it by changing "cgi.fix_pathinfo = 0" in the php.ini. Look at 8.4).
-10.2) Horde (Webmail) - horde.org
-*******************************************************************************
-First of all, install the horde3 and Imp4 packages (Ubuntu/Debian)
-___
-apt-get install horde3 imp4 gollem kronolith2 mnemo2 nag2 turba2
-pear install --onlyreqdeps Log Mail Mail_Mime MDB2 File Date
-___
-It is then necessary to setup an Alias for Apache. 
-If you want horde only on single pages, that are created with ispc3:
-Add the following line to ISPConfig->Sites->Web Domain->Options->Apache directives
-If you want to access webmail on all pages add the following line to /etc/apache2/apache2.conf
-###
-Alias /horde3 /usr/share/horde3
-###
-Allow Apache to write horde configuration files :
-___
-chown -R www-data:www-data /etc/horde
-___
-Important parameters to change are (in Horde setup) :
-###
-Horde URL (change it to /horde3)
-Enable Database Access. Do Not use MySQL Improved (4+), my attempts at using it failed. MySQL Standard runs fine however
-Enable Authentication. I recommend IMAP authentication (something like {localhost:143/imap/notls}. Do not forget the /notls, not specifying failed on my setup). Also make sure to add your username to the list of Administrators, otherwise, you won’t have access to horde/imp4 parameters. Using anything else than IMAP seeemed to fail on my setup
-Generate the configuration
-Horde should now be setup. You now have to configure imp4
-generate a configuration using the horde administration panel
-modify the /etc/horde/imp4/servers.php file. Instruction are given inside the file concerning the syntax. If you run Courier-IMAP, and want Imp to automatically authenticate using horde credentials :
-$servers[’imap’] = array(
-‘name’ => ‘IMAP Server’,
-’server’ => ‘localhost’,
-‘hordeauth’ => true,
-‘protocol’ => ‘imap/notls’,
-‘port’ => 143,
-‘folders’ => ‘INBOX.’,
-‘namespace’ => ‘’,
-‘maildomain’ => ‘domain.com’,
-’smtphost’ => ‘localhost’,
-’smtpport’ => 25,
-‘realm’ => ‘’,
-‘preferred’ => ‘’,
-‘dotfiles’ => false,
-‘hierarchies’ => array()
-);
-###
-11) have fun and drink a cup of coffee
-*******************************************************************************
-:-)
--- a/docs/LOCALIZE_DEBIAN_LENNY.txt
+++ b/docs/LOCALIZE_DEBIAN_LENNY.txt
-# For adding more supported languages to server,
-# in console, rerun locale-config by calling:
-dpkg-reconfigure locales
-# and either choise what you need, or tag "All languages" on top. Note at when having lots of locales in machine, it will slow down
-# installing and upgrading multilingual applications. You can (and should) leave system default as it is.
-#For now my "locale -a" outputs this:
-bokmal
-bokml
-C
-de_DE
-de_DE@euro
-de_DE.iso88591
-de_DE.iso885915@euro
-de_DE.utf8
-deutsch
-en_US
-en_US.iso88591
-en_US.iso885915
-en_US.utf8
-fi_FI
-fi_FI@euro
-fi_FI.iso88591
-fi_FI.iso885915@euro
-fi_FI.utf8
-finnish
-franais
-french
-fr_FR
-fr_FR@euro
-fr_FR.iso88591
-fr_FR.iso885915@euro
-fr_FR.utf8
-german
-nb_NO
-nb_NO.iso88591
-nb_NO.utf8
-no_NO
-no_NO.ISO-8859-1
-norwegian
-POSIX
-sv_SE
-sv_SE.iso88591
-sv_SE.iso885915
-sv_SE.utf8
-swedish
-# Edit /etc/apache2/conf.d/charset and add/edit following section:
-    AddDefaultCharset off
-    # official list of charset names and their respective RFCs.
-    #
-    AddCharset us-ascii    .ascii .us-ascii
-    AddCharset ISO-8859-1  .iso8859-1  .latin1
-    AddCharset ISO-8859-2  .iso8859-2  .latin2 .cen
-    AddCharset ISO-8859-3  .iso8859-3  .latin3
-    AddCharset ISO-8859-4  .iso8859-4  .latin4
-    AddCharset ISO-8859-5  .iso8859-5  .cyr .iso-ru
-    AddCharset ISO-8859-6  .iso8859-6  .arb .arabic
-    AddCharset ISO-8859-7  .iso8859-7  .grk .greek
-    AddCharset ISO-8859-8  .iso8859-8  .heb .hebrew
-    AddCharset ISO-8859-9  .iso8859-9  .latin5 .trk
-    AddCharset ISO-8859-10  .iso8859-10  .latin6
-    AddCharset ISO-8859-13  .iso8859-13
-    AddCharset ISO-8859-14  .iso8859-14  .latin8
-    AddCharset ISO-8859-15  .iso8859-15  .latin9
-    AddCharset ISO-8859-16  .iso8859-16  .latin10
-    AddCharset ISO-2022-JP .iso2022-jp .jis
-    AddCharset ISO-2022-KR .iso2022-kr .kis
-    AddCharset ISO-2022-CN .iso2022-cn .cis
-    AddCharset Big5        .Big5       .big5 .b5
-    AddCharset cn-Big5     .cn-big5
-    # For russian, more than one charset is used (depends on client, mostly):
-    AddCharset WINDOWS-1251 .cp-1251   .win-1251
-    AddCharset CP866       .cp866
-    AddCharset KOI8      .koi8
-    AddCharset KOI8-E      .koi8-e
-    AddCharset KOI8-r      .koi8-r .koi8-ru
-    AddCharset KOI8-U      .koi8-u
-    AddCharset KOI8-ru     .koi8-uk .ua
-    AddCharset ISO-10646-UCS-2 .ucs2
-    AddCharset ISO-10646-UCS-4 .ucs4
-    AddCharset UTF-7       .utf7
-    AddCharset UTF-8       .utf8
-    AddCharset UTF-16      .utf16
-    AddCharset UTF-16BE    .utf16be
-    AddCharset UTF-16LE    .utf16le
-    AddCharset UTF-32      .utf32
-    AddCharset UTF-32BE    .utf32be
-    AddCharset UTF-32LE    .utf32le
-    AddCharset euc-cn      .euc-cn
-    AddCharset euc-gb      .euc-gb
-    AddCharset euc-jp      .euc-jp
-    AddCharset euc-kr      .euc-kr
-    #Not sure how euc-tw got in - IANA doesn't list it???
-    AddCharset EUC-TW      .euc-tw
-    AddCharset gb2312      .gb2312 .gb
-    AddCharset iso-10646-ucs-2 .ucs-2 .iso-10646-ucs-2
-    AddCharset iso-10646-ucs-4 .ucs-4 .iso-10646-ucs-4
-    AddCharset shift_jis   .shift_jis .sjis
-    AddLanguage ca .ca
-    AddLanguage cs .cz .cs
-    AddLanguage da .dk
-    AddLanguage de .de
-    AddLanguage el .el
-    AddLanguage en .en
-    AddLanguage eo .eo
-    AddLanguage es .es
-    AddLanguage et .et
-    AddLanguage fi .fi
-    AddLanguage fr .fr
-    AddLanguage he .he
-    AddLanguage hr .hr
-    AddLanguage it .it
-    AddLanguage ja .ja
-    AddLanguage ko .ko
-    AddLanguage ltz .ltz
-    AddLanguage nl .nl
-    AddLanguage nn .nn
-    AddLanguage no .no
-    AddLanguage pl .po
-    AddLanguage pt .pt
-    AddLanguage pt-BR .pt-br
-    AddLanguage ru .ru
-    AddLanguage sv .sv
-    AddLanguage zh-CN .zh-cn
-    AddLanguage zh-TW .zh-tw
-#this information could also be in two sections in there, and if most of it looks
-#like to be on place allreydy, most important change is "AddDefaultCharset off"
-# After modification, restart Apache
-/etc/init.d/apache2 restart
--- a/docs/Remote_API_docs.txt
+++ b/docs/Remote_API_docs.txt
+The remote API documentation is in the remoting_client/API-docs subfolder.
--- a/docs/autoinstall_samples/autoinstall.conf_sample.php
+++ b/docs/autoinstall_samples/autoinstall.conf_sample.php
+<?php
+$autoinstall['language'] = 'en'; // de, en (default)
+$autoinstall['install_mode'] = 'standard'; // standard (default), expert
+$autoinstall['hostname'] = 'server1.example.com'; // default
+$autoinstall['mysql_hostname'] = 'localhost'; // default: localhost
+$autoinstall['mysql_port'] = '3306'; // default: 3306
+$autoinstall['mysql_root_user'] = 'root'; // default: root
+$autoinstall['mysql_root_password'] = 'howtoforge';
+$autoinstall['mysql_database'] = 'dbispconfig'; // default: dbispcongig
+$autoinstall['mysql_charset'] = 'utf8'; // default: utf8
+$autoinstall['http_server'] = 'nginx'; // apache (default), nginx
+$autoinstall['ispconfig_port'] = '8080'; // default: 8080
+$autoinstall['ispconfig_use_ssl'] = 'y'; // y (default), n
+$autoinstall['ispconfig_admin_password'] = 'admin'; // default: admin
+$autoinstall['create_ssl_server_certs'] = 'y';
+$autoinstall['ignore_hostname_dns'] = 'n';
+$autoinstall['ispconfig_postfix_ssl_symlink'] = 'y';
+$autoinstall['ispconfig_pureftpd_ssl_symlink'] = 'y';
+/* SSL Settings */
+$autoinstall['ssl_cert_country'] = 'AU';
+$autoinstall['ssl_cert_state'] = 'Some-State';
+$autoinstall['ssl_cert_locality'] = 'Chicago';
+$autoinstall['ssl_cert_organisation'] = 'Internet Widgits Pty Ltd';
+$autoinstall['ssl_cert_organisation_unit'] = 'IT department';
+$autoinstall['ssl_cert_common_name'] = $autoinstall['hostname'];
+$autoinstall['ssl_cert_email'] = 'hostmaster@'.$autoinstall['hostname'];
+/* optional expert mode settings, needed only for expert mode */
+$autoinstall['mysql_ispconfig_user'] = 'ispconfig'; // default: ispconfig
+$autoinstall['mysql_ispconfig_password'] = bin2hex(random_bytes(20));
+$autoinstall['join_multiserver_setup'] = 'n'; // y, n (default)
+$autoinstall['mysql_master_hostname'] = 'master.example.com';
+$autoinstall['mysql_master_root_user'] = 'root';
+$autoinstall['mysql_master_root_password'] = 'howtoforge';
+$autoinstall['mysql_master_database'] = 'dbispconfig'; // default: dbispconfig
+$autoinstall['configure_mail'] = 'y'; // y (default), n
+$autoinstall['configure_jailkit'] = 'y'; // y (default), n
+$autoinstall['configure_ftp'] = 'y'; // y (default), n
+$autoinstall['configure_dns'] = 'y'; // y (default), n
+$autoinstall['configure_apache'] = 'y'; // y (default), n
+$autoinstall['configure_nginx'] = 'y'; // y (default), n
+$autoinstall['configure_firewall'] = 'y'; // y (default), n
+$autoinstall['install_ispconfig_web_interface'] = 'y'; // y (default), n
+/* optional update settings, needed only for updates */
+$autoupdate['do_backup'] = 'yes'; // yes (default), no
+$autoupdate['mysql_root_password'] = 'howtoforge';
+$autoupdate['mysql_master_hostname'] = 'master.example.com';
+$autoupdate['mysql_master_root_user'] = 'root';
+$autoupdate['mysql_master_root_password'] = 'howtoforge';
+$autoupdate['mysql_master_database'] = 'dbispconfig'; // default: dbispconfig
+$autoupdate['reconfigure_permissions_in_master_database'] = 'no'; // no (default), yes
+$autoupdate['reconfigure_services'] = 'yes'; // yes (default), no
+$autoupdate['ispconfig_port'] = '8080'; // default: 8080
+$autoupdate['create_new_ispconfig_ssl_cert'] = 'no'; // no (default), yes
+$autoupdate['reconfigure_crontab'] = 'yes'; // yes (default), no
+$autoupdate['create_ssl_server_certs'] = 'y';
+$autoupdate['ignore_hostname_dns'] = 'n';
+$autoupdate['ispconfig_postfix_ssl_symlink'] = 'y';
+$autoupdate['ispconfig_pureftpd_ssl_symlink'] = 'y';
+/* These are for service-detection (defaulting to old behaviour where all changes were automatically accepted) */
+$autoupdate['svc_detect_change_mail_server'] = 'yes'; // yes (default), no
+$autoupdate['svc_detect_change_web_server'] = 'yes'; // yes (default), no
+$autoupdate['svc_detect_change_dns_server'] = 'yes'; // yes (default), no
+$autoupdate['svc_detect_change_xmpp_server'] = 'yes'; // yes (default), no
+$autoupdate['svc_detect_change_firewall_server'] = 'yes'; // yes (default), no
+$autoupdate['svc_detect_change_vserver_server'] = 'yes'; // yes (default), no
+$autoupdate['svc_detect_change_db_server'] = 'yes'; // yes (default), no
+?>
--- a/docs/autoinstall_samples/autoinstall.ini.sample
+++ b/docs/autoinstall_samples/autoinstall.ini.sample
+[install]
+language=en
+install_mode=standard
+hostname=server1.example.com
+mysql_hostname=localhost
+mysql_port=3306
+mysql_root_user=root
+mysql_root_password=ispconfig
+mysql_database=dbispconfig
+mysql_charset=utf8
+http_server=apache
+ispconfig_port=8080
+ispconfig_use_ssl=y
+ispconfig_admin_password=admin
+create_ssl_server_certs=y
+ignore_hostname_dns=n
+ispconfig_postfix_ssl_symlink=y
+ispconfig_pureftpd_ssl_symlink=y
+[ssl_cert]
+ssl_cert_country=AU
+ssl_cert_state=Some-State
+ssl_cert_locality=Chicago
+ssl_cert_organisation=Internet Widgits Pty Ltd
+ssl_cert_organisation_unit=IT department
+ssl_cert_common_name=server1.example.com
+ssl_cert_email=hostmaster@example.com
+[expert]
+mysql_ispconfig_user=ispconfig
+mysql_ispconfig_password=afStEratXBsgatRtsa42CadwhQ
+join_multiserver_setup=n
+mysql_master_hostname=master.example.com
+mysql_master_root_user=root
+mysql_master_root_password=ispconfig
+mysql_master_database=dbispconfig
+configure_mail=y
+configure_jailkit=y
+configure_ftp=y
+configure_dns=y
+configure_apache=y
+configure_nginx=y
+configure_firewall=y
+install_ispconfig_web_interface=y
+[update]
+do_backup=yes
+mysql_root_password=ispconfig
+mysql_master_hostname=master.example.com
+mysql_master_root_user=root
+mysql_master_root_password=ispconfig
+mysql_master_database=dbispconfig
+reconfigure_permissions_in_master_database=no
+reconfigure_services=yes
+ispconfig_port=8080
+create_new_ispconfig_ssl_cert=no
+reconfigure_crontab=yes
+create_ssl_server_certs=y
+ignore_hostname_dns=n
+ispconfig_postfix_ssl_symlink=y
+ispconfig_pureftpd_ssl_symlink=y
+; These are for service-detection (defaulting to old behaviour where all changes were automatically accepted)
+svc_detect_change_mail_server=yes
+svc_detect_change_web_server=yes
+svc_detect_change_dns_server=yes
+svc_detect_change_xmpp_server=yes
+svc_detect_change_firewall_server=yes
+svc_detect_change_vserver_server=yes
+svc_detect_change_db_server=yes
--- a/docs/examples/blacklist_helo.master
+++ b/docs/examples/blacklist_helo.master
+# blacklist_helo - after permit_sasl, used to stop common spammers/misconfigurations
+#
+# This file can be used to block hostnames used in smtp HELO command which are known bad.
+# Occasionally you will run into legitimate mail servers which are misconfigured and end
+# up blocked here, so this is not enabled by default, but it is useful if you are prepared
+# to address those cases.  .local is particularly problematic, and commented out by default.
+#
+# Note that any server hitting this check is misconfigured, all of the names below are bogus
+# and not allowed per RFC 2821.
+#
+# If your own users are blocked by this, they are not authenticating to your server when
+# sending (this check is after permit_sasl, which permits authenticated senders).
+#
+# Instructions:
+#
+# Copy this file to /usr/local/ispconfig/server/conf-custom/install/blacklist_helo.master,
+# as well as /etc/postfix/blacklist_helo, so your changes are not overwritten with ispconfig
+# updates.
+# probably just put REJECT lines in here,
+# as OK lines will bypass a lot of other checks you may want done
+# (use DUNNO instead of OK)
+#
+# common for spammers (check https://data.iana.org/TLD/tlds-alpha-by-domain.txt and remove valid tld's occasionally)
+/.*\.administrator$/    REJECT HELO hostname is using a top level domain that does not exist.  See RFC 2821 section 3.6.
+/.*\.admin$/    REJECT HELO hostname is using a top level domain that does not exist.  See RFC 2821 section 3.6.
+/.*\.adsl$/ REJECT HELO hostname is using a top level domain that does not exist.  See RFC 2821 section 3.6.
+/.*\.arpa$/ REJECT HELO hostname is using a top level domain that does not exist.  See RFC 2821 section 3.6.
+/.*\.bac$/  REJECT HELO hostname is using a top level domain that does not exist.  See RFC 2821 section 3.6.
+/.*\.coma$/ REJECT HELO hostname is using a top level domain that does not exist.  See RFC 2821 section 3.6.
+/.*\.dhcp$/ REJECT HELO hostname is using a top level domain that does not exist.  See RFC 2821 section 3.6.
+/.*\.dlink$/    REJECT HELO hostname is using a top level domain that does not exist.  See RFC 2821 section 3.6.
+/.*\.dns$/  REJECT HELO hostname is using a top level domain that does not exist.  See RFC 2821 section 3.6.
+/.*\.domain$/   REJECT HELO hostname is using a top level domain that does not exist.  See RFC 2821 section 3.6.
+/.*\.dynamic$/  REJECT HELO hostname is using a top level domain that does not exist.  See RFC 2821 section 3.6.
+/.*\.dyndns\.org$/  REJECT HELO hostname is using a top level domain that does not exist.  See RFC 2821 section 3.6.
+/.*\.dyn$/  REJECT HELO hostname is using a top level domain that does not exist.  See RFC 2821 section 3.6.
+/.*\.firewall$/ REJECT HELO hostname is using a top level domain that does not exist.  See RFC 2821 section 3.6.
+/.*\.gateway$/  REJECT HELO hostname is using a top level domain that does not exist.  See RFC 2821 section 3.6.
+/.*\.home$/ REJECT HELO hostname is using a top level domain that does not exist.  See RFC 2821 section 3.6.
+/.*\.internal$/ REJECT HELO hostname is using a top level domain that does not exist.  See RFC 2821 section 3.6.
+/.*\.intern$/   REJECT HELO hostname is using a top level domain that does not exist.  See RFC 2821 section 3.6.
+/.*\.janak$/    REJECT HELO hostname is using a top level domain that does not exist.  See RFC 2821 section 3.6.
+/.*\.kornet$/   REJECT HELO hostname is using a top level domain that does not exist.  See RFC 2821 section 3.6.
+/.*\.lab$/  REJECT HELO hostname is using a top level domain that does not exist.  See RFC 2821 section 3.6.
+/.*\.lan$/  REJECT HELO hostname is using a top level domain that does not exist.  See RFC 2821 section 3.6.
+/.*\.localdomain$/  REJECT HELO hostname is using a top level domain that does not exist.  See RFC 2821 section 3.6.
+/.*\.localhost$/    REJECT HELO hostname is using a top level domain that does not exist.  See RFC 2821 section 3.6.
+# .local is used by spammers a lot, but too many otherwise legit servers hit it
+# (instead of REJECT, should send to greylisting)
+#/.*\.local$/    REJECT HELO hostname is using a top level domain that does not exist.  See RFC 2821 section 3.6.
+/.*\.loc$/  REJECT HELO hostname is using a top level domain that does not exist.  See RFC 2821 section 3.6.
+/.*\.lokal$/    REJECT HELO hostname is using a top level domain that does not exist.  See RFC 2821 section 3.6.
+/.*\.mail$/ REJECT HELO hostname is using a top level domain that does not exist.  See RFC 2821 section 3.6.
+/.*\.nat$/  REJECT HELO hostname is using a top level domain that does not exist.  See RFC 2821 section 3.6.
+/.*\.netzwerk$/ REJECT HELO hostname is using a top level domain that does not exist.  See RFC 2821 section 3.6.
+/.*\.pc$/   REJECT HELO hostname is using a top level domain that does not exist.  See RFC 2821 section 3.6.
+/.*\.privat$/   REJECT HELO hostname is using a top level domain that does not exist.  See RFC 2821 section 3.6.
+/.*\.private$/  REJECT HELO hostname is using a top level domain that does not exist.  See RFC 2821 section 3.6.
+/.*\.router$/   REJECT HELO hostname is using a top level domain that does not exist.  See RFC 2821 section 3.6.
+/.*\.setup$/    REJECT HELO hostname is using a top level domain that does not exist.  See RFC 2821 section 3.6.
+/.*\.119$/  REJECT HELO hostname is using a top level domain that does not exist.  See RFC 2821 section 3.6.
+/.*\.beeline$/  REJECT HELO hostname is using a top level domain that does not exist.  See RFC 2821 section 3.6.
+/.*\.cici$/ REJECT HELO hostname is using a top level domain that does not exist.  See RFC 2821 section 3.6.
+/.*\.gt_3g$/    REJECT HELO hostname is using a top level domain that does not exist.  See RFC 2821 section 3.6.
+/.*\.gt-3g$/    REJECT HELO hostname is using a top level domain that does not exist.  See RFC 2821 section 3.6.
+/.*\.hananet$/  REJECT HELO hostname is using a top level domain that does not exist.  See RFC 2821 section 3.6.
+/.*\.skbroadband$/  REJECT HELO hostname is using a top level domain that does not exist.  See RFC 2821 section 3.6.
+/.*\.tbroad$/   REJECT HELO hostname is using a top level domain that does not exist.  See RFC 2821 section 3.6.
--- a/docs/old_server_plugins/bind_dlz_plugin.inc.php
+++ b/docs/old_server_plugins/bind_dlz_plugin.inc.php
+<?php
+/*
+Copyright (c) 2009, Falko Timme, Till Brehm, projektfarm Gmbh
+All rights reserved.
+Redistribution and use in source and binary forms, with or without modification,
+are permitted provided that the following conditions are met:
+    * Redistributions of source code must retain the above copyright notice,
+      this list of conditions and the following disclaimer.
+    * Redistributions in binary form must reproduce the above copyright notice,
+      this list of conditions and the following disclaimer in the documentation
+      and/or other materials provided with the distribution.
+    * Neither the name of ISPConfig nor the names of its contributors
+      may be used to endorse or promote products derived from this software without
+      specific prior written permission.
+THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
+IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT,
+INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY
+OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
+NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
+EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+*/
+/*
+TABLE STRUCTURE of the "named" database:
+CREATE TABLE IF NOT EXISTS `records` (
+  `id` int(10) unsigned NOT NULL auto_increment,
+  `zone` varchar(255) NOT NULL,
+  `ttl` int(11) NOT NULL default '3600',
+  `type` varchar(255) NOT NULL,
+  `host` varchar(255) NOT NULL default '@',
+  `mx_priority` int(11) default NULL,
+  `data` text,
+  `primary_ns` varchar(255) default NULL,
+  `resp_contact` varchar(255) default NULL,
+  `serial` bigint(20) default NULL,
+  `refresh` int(11) default NULL,
+  `retry` int(11) default NULL,
+  `expire` int(11) default NULL,
+  `minimum` int(11) default NULL,
+  `ispconfig_id` int(11) NOT NULL,
+  PRIMARY KEY  (`id`),
+  KEY `type` (`type`),
+  KEY `host` (`host`),
+  KEY `zone` (`zone`)
+) ENGINE=MyISAM  DEFAULT CHARSET=utf8;
+CREATE TABLE IF NOT EXISTS `xfr` (
+  `id` int(11) NOT NULL auto_increment,
+  `zone` varchar(255) NOT NULL,
+  `client` varchar(255) NOT NULL,
+  `ispconfig_id` int(11) NOT NULL,
+  PRIMARY KEY  (`id`),
+  KEY `zone` (`zone`),
+  KEY `client` (`client`)
+) ENGINE=MyISAM  DEFAULT CHARSET=utf8;
+*/
+class bind_dlz_plugin {
+	var $plugin_name = 'bind_dlz_plugin';
+	var $class_name  = 'bind_dlz_plugin';
+	//* This function is called during ispconfig installation to determine
+	//  if a symlink shall be created for this plugin.
+	function onInstall()
+	{
+		global $conf;
+		if(isset($conf['bind']['installed']) && $conf['bind']['installed'] == true) {
+			// Temporarily disabled until the installer supports the automatic creation of the necessary
+			// database or at least to select between filebased nd db based bind, as not all bind versions
+			// support dlz out of the box. To enable this plugin manually, create a symlink from the plugins-enabled
+			// directory to this file in the plugins-available directory.
+			return false;
+			//return true;
+		} else {
+			return false;
+		}
+	}
+	/*
+	 	This function is called when the plugin is loaded
+	*/
+	function onLoad()
+	{
+		global $app;
+		/*
+		Register for the events
+		*/
+		//* SOA
+		$app->plugins->registerEvent('dns_soa_insert', $this->plugin_name, 'soa_insert');
+		$app->plugins->registerEvent('dns_soa_update', $this->plugin_name, 'soa_update');
+		$app->plugins->registerEvent('dns_soa_delete', $this->plugin_name, 'soa_delete');
+		//* RR
+		$app->plugins->registerEvent('dns_rr_insert', $this->plugin_name, 'rr_insert');
+		$app->plugins->registerEvent('dns_rr_update', $this->plugin_name, 'rr_update');
+		$app->plugins->registerEvent('dns_rr_delete', $this->plugin_name, 'rr_delete');
+	}
+	function soa_insert($event_name, $data)
+	{
+		global $app, $conf;
+		if($data["new"]["active"] != 'Y') return;
+		$origin = substr($data["new"]["origin"], 0, -1);
+		$ispconfig_id = $data["new"]["id"];
+		$serial = $app->db->queryOneRecord("SELECT * FROM dns_soa WHERE id = ?", $ispconfig_id);
+		$ttl = $data["new"]["ttl"];
+		//$_db = clone $app->db;
+		//$_db->dbName = 'named';
+		$app->db->query("INSERT INTO named.records (zone, ttl, type, primary_ns, resp_contact, serial, refresh, retry, expire, minimum, ispconfig_id) VALUES ".
+			"(?, ?, 'SOA', ?, ?, ?, ?, ?, ?, ?, ?)", $origin, $ttl, $data["new"]["ns"], $data["new"]["mbox"], $serial["serial"], $serial["refresh"], $serial["retry"], $serial["expire"], $serial["minimum"], $ispconfig_id);
+		//unset($_db);
+	}
+	function soa_update($event_name, $data)
+	{
+		global $app, $conf;
+		if($data["new"]["active"] != 'Y')
+		{
+			if($data["old"]["active"] != 'Y') return;
+			$this->soa_delete($event_name, $data);
+		}
+		else
+		{
+			if($data["old"]["active"] == 'Y')
+			{
+				$origin = substr($data["new"]["origin"], 0, -1);
+				$ispconfig_id = $data["new"]["id"];
+				$serial = $app->db->queryOneRecord("SELECT * FROM dns_soa WHERE id = ?", $ispconfig_id);
+				$ttl = $data["new"]["ttl"];
+				//$_db = clone $app->db;
+				//$_db->dbName = 'named';
+				$app->db->query("UPDATE named.records SET zone = ?, ttl = ?, primary_ns = ?, resp_contact = ?, serial = ?, refresh = ?, retry = ?, expire = ?, minimum = ? WHERE ispconfig_id = ? AND type = 'SOA'", $origin, $ttl, $data["new"]["ns"], $data["new"]["mbox"], $serial["serial"], $serial["refresh"], $serial["retry"], $serial["expire"], $serial["minimum"], $data["new"]["id"]);
+				//unset($_db);
+			}
+			else
+			{
+				$this->soa_insert($event_name, $data);
+				$ispconfig_id = $data["new"]["id"];
+				if ($records = $app->db->queryAllRecords("SELECT * FROM dns_rr WHERE zone = ? AND active = 'Y'", $ispconfig_id))
+				{
+					foreach($records as $record)
+					{
+						foreach ($record as $key => $val) {
+							$data["new"][$key] = $val;
+						}
+						$this->rr_insert("dns_rr_insert", $data);
+					}
+				}
+			}
+		}
+	}
+	function soa_delete($event_name, $data)
+	{
+		global $app, $conf;
+		//$_db = clone $app->db;
+		//$_db->dbName = 'named';
+		$app->db->query( "DELETE FROM named.dns_records WHERE zone = ?", substr($data['old']['origin'], 0, -1));
+		//unset($_db);
+	}
+	function rr_insert($event_name, $data)
+	{
+		global $app, $conf;
+		if($data["new"]["active"] != 'Y') return;
+		$zone = $app->db->queryOneRecord("SELECT * FROM dns_soa WHERE id = ?", $data["new"]["zone"]);
+		$origin = substr($zone["origin"], 0, -1);
+		$ispconfig_id = $data["new"]["id"];
+		$type = $data["new"]["type"];
+		if (substr($data["new"]["name"], -1) == '.') {
+			$name = substr($data["new"]["name"], 0, -1);
+		} else {
+			$name = ($data["new"]["name"] == "") ? $name = '@' : $data["new"]["name"];
+		}
+		if ($name == $origin || $name == '') {
+			$name = '@';
+		}
+		switch ($type)
+		{
+		case "CNAME":
+		case "MX":
+		case "NS":
+		case "ALIAS":
+		case "PTR":
+		case "SRV":
+			if(substr($data["new"]["data"], -1) != '.'){
+				$content = $data["new"]["data"] . '.';
+			} else {
+				$content = $data["new"]["data"];
+			}
+			break;
+		case "HINFO":
+			$content = $data["new"]["data"];
+			$quote1 = strpos($content, '"');
+			if($quote1 !== FALSE) {
+				$quote2 = strpos(substr($content, ($quote1 + 1)), '"');
+			}
+			if ($quote1 !== FALSE && $quote2 !== FALSE) {
+				$text_between_quotes = str_replace(' ', '_', substr($content, ($quote1 + 1), (($quote2 - $quote1))));
+				$content = $text_between_quotes.substr($content, ($quote2 + 2));
+			}
+			break;
+		default:
+			$content = $data["new"]["data"];
+		}
+		$ttl = $data["new"]["ttl"];
+		//$_db = clone $app->db;
+		//$_db->dbName = 'named';
+		if ($type == 'MX') {
+			$app->db->query("INSERT INTO named.records (zone, ttl, type, host, mx_priority, data, ispconfig_id)".
+				" VALUES (?, ?, ?, ?, ?, ?, ?)", $origin, $ttl, $type, $name, $data["new"]["aux"], $content, $ispconfig_id);
+		} elseif ($type == 'SRV') {
+			$app->db->query("INSERT INTO named.records (zone, ttl, type, data, ispconfig_id)".
+				" VALUES (?, ?, ?, ?, ?)", $origin, $ttl, $type, $data["new"]["aux"] . ' ' . $content, $ispconfig_id);
+		} else {
+			$app->db->query("INSERT INTO named.records (zone, ttl, type, host, data, ispconfig_id)".
+				" VALUES (?, ?, ?, ?, ?, ?)", $origin, $ttl, $type, $name, $content, $ispconfig_id);
+		}
+		//unset($_db);
+	}
+	function rr_update($event_name, $data)
+	{
+		global $app, $conf;
+		if ($data["new"]["active"] != 'Y')
+		{
+			if($data["old"]["active"] != 'Y') return;
+			$this->rr_delete($event_name, $data);
+		}
+		else
+		{
+			if ($data["old"]["active"] == 'Y')
+			{
+				$zone = $app->db->queryOneRecord("SELECT * FROM dns_soa WHERE id = ?", $data["new"]["zone"]);
+				$origin = substr($zone["origin"], 0, -1);
+				$ispconfig_id = $data["new"]["id"];
+				$type = $data["new"]["type"];
+				if (substr($data["new"]["name"], -1) == '.') {
+					$name = substr($data["new"]["name"], 0, -1);
+				} else {
+					$name = ($data["new"]["name"] == "") ? $name = '@' : $data["new"]["name"];
+				}
+				if ($name == $origin || $name == '') {
+					$name = '@';
+				}
+				switch ($type)
+				{
+				case "CNAME":
+				case "MX":
+				case "NS":
+				case "ALIAS":
+				case "PTR":
+				case "SRV":
+					if(substr($data["new"]["data"], -1) != '.'){
+						$content = $data["new"]["data"] . '.';
+					} else {
+						$content = $data["new"]["data"];
+					}
+					break;
+				case "HINFO":
+					$content = $data["new"]["data"];
+					$quote1 = strpos($content, '"');
+					if($quote1 !== FALSE){
+						$quote2 = strpos(substr($content, ($quote1 + 1)), '"');
+					}
+					if($quote1 !== FALSE && $quote2 !== FALSE){
+						$text_between_quotes = str_replace(' ', '_', substr($content, ($quote1 + 1), (($quote2 - $quote1))));
+						$content = $text_between_quotes.substr($content, ($quote2 + 2));
+					}
+					break;
+				default:
+					$content = $data["new"]["data"];
+				}
+				$ttl = $data["new"]["ttl"];
+				$prio = (int)$data["new"]["aux"];
+				//$_db = clone $app->db;
+				//$_db->dbName = 'named';
+				if ($type == 'MX') {
+					$app->db->query("UPDATE named.records SET zone = ?, ttl = ?, type = ?, host = ?, mx_priority = ?, data = ? WHERE ispconfig_id = ? AND type != 'SOA'", $origin, $ttl, $type, $name, $prio, $content, $ispconfig_id);
+				} elseif ($type == 'SRV') {
+					$app->db->query("UPDATE named.records SET zone = ?, ttl = ?, type = ?, data = ? WHERE ispconfig_id = ? AND type != 'SOA'", $origin, $ttl, $type, $prio . ' ' . $content, $ispconfig_id);
+				} else {
+					$app->db->query("UPDATE named.records SET zone = ?, ttl = ?, type = ?, host = ?, data = ? WHERE ispconfig_id = ? AND type != 'SOA'", $origin, $ttl, $type, $name, $content, $ispconfig_id);
+				}
+				//unset($_db);
+			} else {
+				$this->rr_insert($event_name, $data);
+			}
+		}
+	}
+	function rr_delete($event_name, $data) {
+		global $app, $conf;
+		//$_db = clone $app->db;
+		//$_db->dbName = 'named';
+		$app->db->query( "DELETE FROM named.dns_records WHERE type != 'SOA' AND zone = ?", substr($data['old']['origin'], 0, -1));
+		//unset($_db);
+	}
+} // end class
+?>
--- a/docs/old_server_plugins/nginx_reverseproxy_plugin.inc.php
+++ b/docs/old_server_plugins/nginx_reverseproxy_plugin.inc.php
+<?php
+class nginx_reverseproxy_plugin {
+	var $plugin_name = 'nginx_reverseproxy_plugin';
+	var $class_name = 'nginx_reverseproxy_plugin';
+	// private variables
+	var $action = '';
+	//* This function is called during ispconfig installation to determine
+	//  if a symlink shall be created for this plugin.
+	function onInstall() {
+		global $conf;
+		if(isset($conf['services']['proxy']) && $conf['services']['proxy'] == true && isset($conf['nginx']['installed']) && $conf['nginx']['installed'] == true) {
+			return true;
+		} else {
+			return false;
+		}
+	}
+	/*
+	 	This function is called when the plugin is loaded
+	*/
+	function onLoad() {
+		global $app;
+		/*
+		Register for the events
+		*/
+		$app->plugins->registerEvent('web_domain_insert', $this->plugin_name, 'ssl');
+		$app->plugins->registerEvent('web_domain_update', $this->plugin_name, 'ssl');
+		$app->plugins->registerEvent('web_domain_delete', $this->plugin_name, 'ssl');
+		$app->plugins->registerEvent('web_domain_insert', $this->plugin_name, 'insert');
+		$app->plugins->registerEvent('web_domain_update', $this->plugin_name, 'update');
+		$app->plugins->registerEvent('web_domain_delete', $this->plugin_name, 'delete');
+		// $app->plugins->registerEvent('proxy_reverse_insert',$this->plugin_name,'rewrite_insert');
+		// $app->plugins->registerEvent('proxy_reverse_update',$this->plugin_name,'rewrite_update');
+		// $app->plugins->registerEvent('proxy_reverse_delete',$this->plugin_name,'rewrite_delete');
+	}
+	function insert($event_name, $data) {
+		global $app, $conf;
+		// just run the update function
+		$this->update($event_name, $data);
+	}
+	function update($event_name, $data) {
+		global $app, $conf;
+		if($this->action != 'insert') $this->action = 'update';
+		if($data['new']['type'] != 'vhost' && $data['new']['type'] != 'vhostsubdomain' && $data['new']['type'] != 'vhostalias' && $data['new']['parent_domain_id'] > 0) {
+			$old_parent_domain_id = intval($data['old']['parent_domain_id']);
+			$new_parent_domain_id = intval($data['new']['parent_domain_id']);
+			// If the parent_domain_id has been chenged, we will have to update the old site as well.
+			if($this->action == 'update' && $data['new']['parent_domain_id'] != $data['old']['parent_domain_id']) {
+				$tmp = $app->dbmaster->queryOneRecord("SELECT * FROM web_domain WHERE domain_id = ? AND active = 'y'", $old_parent_domain_id);
+				$data['new'] = $tmp;
+				$data['old'] = $tmp;
+				$this->action = 'update';
+				$this->update($event_name, $data);
+			}
+			// This is not a vhost, so we need to update the parent record instead.
+			$tmp = $app->dbmaster->queryOneRecord("SELECT * FROM web_domain WHERE domain_id = ? AND active = 'y'", $new_parent_domain_id);
+			$data['new'] = $tmp;
+			$data['old'] = $tmp;
+			$this->action = 'update';
+		}
+		// load the server configuration options
+		$app->uses('getconf');
+		$nginx_config = $app->getconf->get_server_config($conf['server_id'], 'web');
+		// Create group and user, if not exist
+		$app->uses('system');
+		//* Create the vhost config file
+		$app->load('tpl');
+		$tpl = new tpl();
+		$tpl->newTemplate('nginx_reverseproxy_vhost.conf.master');
+		$vhost_data = $data['new'];
+		$vhost_data['config_dir'] = $config['nginx']['config_dir'];
+		$vhost_data['ssl_domain'] = $data['new']['ssl_domain'];
+		// Check if a SSL cert exists
+		$ssl_dir = $config['nginx']['config_dir'].'/ssl';
+		$domain = $data['new']['ssl_domain'];
+		$key_file = $ssl_dir.'/'.$domain.'.key';
+		$crt_file = $ssl_dir.'/'.$domain.'.crt';
+		$bundle_file = $ssl_dir.'/'.$domain.'.bundle';
+		if($vhost_data['nginx_directives']) {
+			$vhost_data['nginx_directives'] = preg_replace("/\[IP\]/", $vhost_data['ip_address'], $vhost_data['nginx_directives']);
+		}
+		if($data['new']['ssl'] == 'y' && @is_file($crt_file) && @is_file($key_file)) {
+			$vhost_data['ssl_enabled'] = 1;
+			$app->log('Enable SSL for: '.$domain, LOGLEVEL_DEBUG);
+		} else {
+			$vhost_data['ssl_enabled'] = 0;
+			$app->log('Disable SSL for: '.$domain, LOGLEVEL_DEBUG);
+		}
+		if(@is_file($bundle_file)) $vhost_data['has_bundle_cert'] = 1;
+		$tpl->setVar($vhost_data);
+		// get alias domains (co-domains and subdomains)
+		$aliases = $app->dbmaster->queryAllRecords("SELECT * FROM web_domain WHERE parent_domain_id = ? AND (type != 'vhostsubdomain' OR type != 'vhostalias') AND active = 'y'", $data['new']['domain_id']);
+		$server_alias = array();
+		switch($data['new']['subdomain']) {
+		case 'www':
+			$server_alias[] .= 'www.'.$data['new']['domain'].' ';
+			break;
+		case '*':
+			$server_alias[] .= '*.'.$data['new']['domain'].' ';
+			break;
+		}
+		if(is_array($aliases)) {
+			foreach($aliases as $alias) {
+				switch($alias['subdomain']) {
+				case 'www':
+					$server_alias[] .= 'www.'.$alias['domain'].' '.$alias['domain'].' ';
+					break;
+				case '*':
+					$server_alias[] .= '*.'.$alias['domain'].' '.$alias['domain'].' ';
+					break;
+				default:
+					$server_alias[] .= $alias['domain'].' ';
+					break;
+				}
+				$app->log('Add server alias: '.$alias['domain'], LOGLEVEL_DEBUG);
+			}
+		}
+		//* If we have some alias records
+		if(count($server_alias) > 0) {
+			$server_alias_str = '';
+			$n = 0;
+			// begin a new ServerAlias line after 30 alias domains
+			foreach($server_alias as $tmp_alias) {
+				if($n % 30 == 0) $server_alias_str .= " ";
+				$server_alias_str .= $tmp_alias;
+			}
+			unset($tmp_alias);
+			$tpl->setVar('alias', trim($server_alias_str));
+		} else {
+			$tpl->setVar('alias', '');
+		}
+		$vhost_file = $nginx_config['nginx_vhost_conf_dir'].'/'.$data['new']['domain'].'.vhost';
+		//* Make a backup copy of vhost file
+		copy($vhost_file, $vhost_file.'~');
+		//* Write vhost file
+		file_put_contents($vhost_file, $tpl->grab());
+		$app->log('Writing the vhost file: '.$vhost_file, LOGLEVEL_DEBUG);
+		unset($tpl);
+		// Set the symlink to enable the vhost
+		$vhost_symlink = $nginx_config['nginx_vhost_conf_enabled_dir'].'/'.$data['new']['domain'].'.vhost';
+		if($data['new']['active'] == 'y' && !is_link($vhost_symlink)) {
+			symlink($vhost_file, $vhost_symlink);
+			$app->log('Creating symlink: '.$vhost_symlink.'->'.$vhost_file, LOGLEVEL_DEBUG);
+		}
+		// Remove the symlink, if site is inactive
+		if($data['new']['active'] == 'n' && is_link($vhost_symlink)) {
+			unlink($vhost_symlink);
+			$app->log('Removing symlink: '.$vhost_symlink.'->'.$vhost_file, LOGLEVEL_DEBUG);
+		}
+		if(!is_dir('/var/log/ispconfig/nginx/'.$data['new']['domain'])) $app->system->exec_safe('mkdir -p ?', '/var/log/ispconfig/nginx/'.$data['new']['domain']);
+		// remove old symlink and vhost file, if domain name of the site has changed
+		if($this->action == 'update' && $data['old']['domain'] != '' && $data['new']['domain'] != $data['old']['domain']) {
+			$vhost_symlink = $nginx_config['nginx_vhost_conf_enabled_dir'].'/'.$data['old']['domain'].'.vhost';
+			unlink($vhost_symlink);
+			$app->log('Removing symlink: '.$vhost_symlink.'->'.$vhost_file, LOGLEVEL_DEBUG);
+			$vhost_file = $nginx_config['nginx_vhost_conf_dir'].'/'.$data['old']['domain'].'.vhost';
+			unlink($vhost_file);
+			$app->log('Removing file: '.$vhost_file, LOGLEVEL_DEBUG);
+			if(is_dir('/var/log/ispconfig/nginx/'.$data['old']['domain'])) $app->system->exec_safe('rm -rf ?', '/var/log/ispconfig/nginx/'.$data['old']['domain']);
+		}
+		// request a httpd reload when all records have been processed
+		$app->services->restartServiceDelayed('nginx', 'restart');
+		// Remove the backup copy of the config file.
+		if(@is_file($vhost_file.'~')) unlink($vhost_file.'~');
+		//* Unset action to clean it for next processed vhost.
+		$this->action = '';
+	}
+	// Handle the creation of SSL certificates
+	function ssl($event_name, $data) {
+		global $app, $conf;
+		if(!is_dir($conf['nginx']['config_dir'].'/ssl')) $app->system->exec_safe('mkdir -p ?', $conf['nginx']['config_dir'].'/ssl');
+		$ssl_dir = $conf['nginx']['config_dir'].'/ssl';
+		$domain = $data['new']['ssl_domain'];
+		$key_file = $ssl_dir.'/'.$domain.'.key.org';
+		$key_file2 = $ssl_dir.'/'.$domain.'.key';
+		$csr_file = $ssl_dir.'/'.$domain.'.csr';
+		$crt_file = $ssl_dir.'/'.$domain.'.crt';
+		//* Save a SSL certificate to disk
+		if($data["new"]["ssl_action"] == 'save') {
+			$web = $app->masterdb->queryOneRecord("select wd.document_root, sp.ip_address from web_domain wd INNER JOIN server_ip sp USING(server_id) WHERE domain = ?", $data['new']['domain']);
+			$src_ssl_dir = $web["document_root"]."/ssl";
+			//$domain = $data["new"]["ssl_domain"];
+			//$csr_file = $ssl_dir.'/'.$domain.".csr";
+			//$crt_file = $ssl_dir.'/'.$domain.".crt";
+			//$bundle_file = $ssl_dir.'/'.$domain.".bundle";
+			$app->system->exec_safe('rsync -v -e ssh root@?:? ?', $web['ip_address'], '~/'.$src_ssl_dir, $ssl_dir);
+			$app->log('Syncing SSL Cert for: '.$domain, LOGLEVEL_DEBUG);
+		}
+		//* Delete a SSL certificate
+		if($data['new']['ssl_action'] == 'del') {
+			//$ssl_dir = $data['new']['document_root'].'/ssl';
+			$domain = $data['new']['ssl_domain'];
+			$csr_file = $ssl_dir.'/'.$domain.'.csr';
+			$crt_file = $ssl_dir.'/'.$domain.'.crt';
+			$bundle_file = $ssl_dir.'/'.$domain.'.bundle';
+			unlink($csr_file);
+			unlink($crt_file);
+			unlink($bundle_file);
+			$app->log('Deleting SSL Cert for: '.$domain, LOGLEVEL_DEBUG);
+		}
+	}
+	function delete($event_name, $data) {
+		global $app, $conf;
+		// load the server configuration options
+		$app->uses('getconf');
+		$nginx_config = $app->getconf->get_server_config($conf['server_id'], 'web');
+		if($data['old']['type'] == 'vhost' || $data['old']['type'] == 'vhostsubdomain' || $data['old']['type'] == 'vhostalias') {
+			//* This is a website
+			// Deleting the vhost file, symlink and the data directory
+			$vhost_symlink = $nginx_config['nginx_vhost_conf_enabled_dir'].'/'.$data['old']['domain'].'.vhost';
+			unlink($vhost_symlink);
+			$app->log('Removing symlink: '.$vhost_symlink.'->'.$vhost_file, LOGLEVEL_DEBUG);
+			$vhost_file = $nginx_config['nginx_vhost_conf_dir'].'/'.$data['old']['domain'].'.vhost';
+			unlink($vhost_file);
+			$app->log('Removing vhost file: '.$vhost_file, LOGLEVEL_DEBUG);
+			// Delete the log file directory
+			$vhost_logfile_dir = '/var/log/ispconfig/nginx/'.$data['old']['domain'];
+			if($data['old']['domain'] != '' && !stristr($vhost_logfile_dir, '..')) $app->system->exec_safe('rm -rf ?', $vhost_logfile_dir);
+			$app->log('Removing website logfile directory: '.$vhost_logfile_dir, LOGLEVEL_DEBUG);
+		}
+	}
+	function rewrite_insert($event_name, $data) {
+		global $app, $conf;
+		// just run the update function
+		$this->update($event_name, $data);
+	}
+	function rewrite_update($event_name, $data) {
+		global $app, $conf;
+		$rules = $this->_getRewriteRules($app);
+		$app->uses('getconf');
+		$nginx_config = $app->getconf->get_server_config($conf['server_id'], 'web');
+		$app->load('tpl');
+		$tpl = new tpl();
+		$tpl->newTemplate("nginx_reverseproxy_rewrites.conf.master");
+		if (!empty($rules))$tpl->setLoop('nginx_rewrite_rules', $rules);
+		$rewrites_file = $nginx_config['nginx_vhost_conf_dir'].'/default.rewrites.conf';
+		//* Make a backup copy of vhost file
+		copy($rewrites_file, $rewrites_file.'~');
+		//* Write vhost file
+		file_put_contents($rewrites_file, $tpl->grab());
+		$app->log('Writing the nginx rewrites file: '.$rewrites_file, LOGLEVEL_DEBUG);
+		unset($tpl);
+		// Set the symlink to enable the vhost
+		$rewrite_symlink = $nginx_config['nginx_vhost_conf_enabled_dir'].'/default.rewrites.conf';
+		if(!is_link($rewrite_symlink)) {
+			symlink($rewrites_file, $rewrite_symlink);
+			$app->log('Creating symlink for nginx rewrites: '.$rewrite_symlink.'->'.$rewrites_file, LOGLEVEL_DEBUG);
+		}
+	}
+	function rewrite_delete($event_name, $data) {
+		global $app, $conf;
+		// just run the update function
+		$this->rewrite_update($event_name, $data);
+	}
+	function _getRewriteRules($app)
+	{
+		$rules = array();
+		$rules = $app->db->queryAllRecords("SELECT rewrite_url_src, rewrite_url_dst FROM proxy_reverse ORDER BY rewrite_id ASC");
+		return $rules;
+	}
+} // end class
+?>
--- a/docs/under_development/CHROOTED_DEBIAN_5.0.txt
+++ b/docs/under_development/CHROOTED_DEBIAN_5.0.txt
+#!/bin/sh
+#
+# rev 0.6
+#
+# dxr@brutalsec.net
+#    01-09-2009
+#
+# We can create a script for configure chroot environment but,
+# YOU MUST UNDERSTAND HOW TO WORK IT for can solve possible 
+# problems in the future.
+# 
+# Every service has its own chroot environment:
+# BIND -> chroot
+# Apache -> chroot
+# Dovecot -> chroot
+# Pureftpd -> Apache's chroot
+# 
+# Only apache and php packages aren't installed in real system,
+# only in chroot environment with symbolic links from real system.
+# 
+# PLEASE, CONFIGURE CHROOT ENVIROMENT IF SECURITY IS REALLY 
+# IMPORTANT FOR YOU AND YOU KNOWN HOW TO WORK IT!
+#
+exit 1
+1. BACKUP before changing anything on the system
+2. Create partitions
+3. Remove possible Apache or PHP installations on real system
+4. Prepare Chroot environment
+5. Linking Webserver aplication from real system
+6. mini_sendmail
+7. Test services
+8. Howto install ispconfig3
+9. Migration
+1. BACKUP before changing anything on the system 
+# If is not a new installation, then
+BACKUP BACKUP BACKUP BACKUP BACKUP BACKUP
+BACKUP BACKUP BACKUP BACKUP BACKUP BACKUP
+BACKUP BACKUP BACKUP BACKUP BACKUP BACKUP
+BACKUP BACKUP BACKUP BACKUP BACKUP BACKUP
+2. Create partitions
+/var/www/ Chroot partition (ext3)
+/var/www/html/ Chroot system
+/var/www/html/var/log/apache2 Log partition (ext3)
+/var/www/html/var/www/html Webs partition (xfs)
+/var/www/html/tmp Temporal dir (tmpfs, options: )
+/dev/lvm_foobar1/chroot_lv      -> /var/www/ (ext3)
+/dev/lvm_foobar2/apachelogs_lv  -> /var/www/html/var/log/apache2 (ext3)
+/dev/lvm_foobar3/hosting_lv     -> /var/www/html/var/www/html (xfs)
+mount /dev/lvm_foobar1/chroot_lv /var/www/
+mkdir -p /var/www/html/var/log/apache2 /var/www/html/var/www/html
+mount /dev/lvm_foobar2/apachelogs_lv /var/www/html/var/log/apache2
+mount /dev/lvm_foobar3/hosting_lv /var/www/html/var/www/html
+3. Remove possible Apache or PHP installations on real system
+# We never wont install apache or php in non-chroot system, if we have installed, we only have do a backup of configurations, uninstall, and check every symbolic link
+dpkg -l|egrep --color -i 'apache|php'
+4. Prepare Chroot environment
+# Install packages in real system
+apt-get install debootstrap libpcre3 libaprutil1 libxml2 mime-support patch make gcc mysql-server subversion ssh openssh-server ntp ntpdate vim libdbd-mysql libdbi-perl dnsutils
+# The non webserver will install outside of chroot
+apt-get install postfix postfix-mysql postfix-doc mysql-client openssl getmail4 rkhunter amavisd-new spamassassin clamav clamav-daemon zoo unzip bzip2 arj nomarch lzop cabextract apt-listchanges libnet-ldap-perl libauthen-sasl-perl clamav-docs daemon libio-string-perl libio-socket-ssl-perl libnet-ident-perl zip libnet-dns-perl pure-ftpd-common pure-ftpd-mysql quota quotatool
+# If you will use courier:
+apt-get install courier-authdaemon courier-authlib-mysql courier-pop courier-pop-ssl courier-imap courier-imap-ssl libsasl2-2 libsasl2-modules libsasl2-modules-sql sasl2-bin libpam-mysql courier-maildrop
+# If you will use dovecot:
+#apt-get install dovecot-imapd dovecot-pop3d
+# If you will use BIND:
+apt-get install bind9 bind9utils
+#
+# If we want execute php from real system (crontabs for example) we need install php dependencies in real system:
+# libgd2-xpm libt1-5 libmagick10 libc-client2007b libmcrypt4
+# cat /var/log/ispconfig/cron.log
+# ldd /usr/lib/php5/20060613/mcrypt.so
+#
+time debootstrap --arch=amd64 lenny /var/www/html/ ftp://ftp.fr.debian.org/debian/
+echo "/proc         /var/www/html/proc               proc           defaults        0       0">>/etc/fstab
+echo "devpts      /var/www/html/dev/pts            devpts         defaults        0       0">>/etc/fstab
+mount -a
+# We must create sshusers group
+echo "@sshusers       -       chroot  /var/www/html/">>/etc/security/limits.conf
+chroot /var/www/html apt-get update
+chroot /var/www/html apt-get install fakeroot --force-yes -y
+chroot /var/www/html apt-get install locales
+chroot /var/www/html dpkg-reconfigure locales
+mv /usr/lib/apache2 /usr/lib/apache2_old
+mv /var/log/apache2 /var/log/apache2_old
+mv /var/lock/apache2 /var/lock/apache2_old
+mv /var/lib/apache2 /var/lib/apache2_old
+mv /usr/lib/php5 /usr/lib/php5_old
+mv /etc/apache2 /etc/apache2_old
+mv /etc/suphp /etc/suphp_old
+chroot /var/www/html apt-get install apache2 apache2.2-common apache2-doc apache2-mpm-prefork apache2-utils libexpat1 ssl-cert libapache2-mod-php5 php5 php5-common php5-gd php5-mysql php5-imap phpmyadmin php5-cli php5-cgi libapache2-mod-fcgid apache2-suexec php-pear php-auth php5-mcrypt mcrypt php5-imagick imagemagick libapache2-mod-suphp libopenssl-ruby libapache2-mod-chroot php-apc libtimedate-perl
+chroot /var/www/html /etc/init.d/apache2 stop
+chroot /var/www/html a2enmod mod_chroot
+chroot /var/www/html a2enmod suexec
+echo "ChrootDir /var/www/html" > /var/www/html/etc/apache2/conf.d/mod_chroot.conf
+sed -i -e 's#DocumentRoot /var/www/#DocumentRoot /var/www/html/#' /var/www/html/etc/apache2/sites-enabled/000-default
+sed -i -e 's#x-httpd-php=php:/usr/bin/php-cgi#x-httpd-php=php:/usr/bin/php-cgi\nx-httpd-suphp=php:/usr/bin/php-cgi\nx-httpd-php=php:/usr/bin/php-cgi#' /var/www/html/etc/suphp/suphp.conf
+sed -i -e 's#/var/run/apache2.pid#/var/run/apache2/apache2.pid#' /var/www/html/etc/apache2/envvars
+sed -i -e 's/^"syntax on/syntax on/' /etc/vim/vimrc
+sed -i -e 's/^"syntax on/syntax on/' /var/www/html/etc/vim/vimrc
+# Protect apache configuration. ONLY root can read it
+chown root:root /var/www/html/etc/apache2/ && chmod 700 /var/www/html/etc/apache2/
+chmod 711 /var/www/html/etc/php5/
+5. # Is good idea to add Nagios alarm for check every symbolic link is correct.
+ln -s /var/www/html/etc/apache2 /etc/apache2
+ln -s /var/www/html/etc/suphp /etc/suphp
+ln -s /var/www/html/var/run/apache2 /var/run/apache2
+ln -s /var/www/html/var/run/apache2.pid /var/run/apache2.pid
+ln -s /var/www/html/usr/sbin/apache2ctl /usr/sbin/apache2ctl
+ln -s /var/www/html/usr/sbin/apache2 /usr/sbin/apache2
+ln -s /var/www/html/usr/lib/apache2 /usr/lib/apache2
+ln -s /var/www/html/usr/sbin/a2enmod /usr/sbin/a2enmod
+ln -s /var/www/html/usr/sbin/a2dismod /usr/sbin/a2dismod
+ln -s /var/www/html/usr/sbin/a2ensite /usr/sbin/a2ensite
+ln -s /var/www/html/usr/sbin/a2dissite /usr/sbin/a2dissite
+ln -s /var/www/html/var/log/apache2 /var/log/apache2
+ln -s /var/www/html/var/lock/apache2 /var/lock/apache2
+ln -s /var/www/html/var/lib/apache2 /var/lib/apache2
+ln -s /var/www/html/usr/lib/php5 /usr/lib/php5
+ln -s /var/www/html/etc/init.d/apache2 /etc/init.d/apache2
+# Neccessary for to install ispconfig3 from real system:
+ln -s /var/www/html/usr/bin/php5 /usr/bin/php5
+ln -s /var/www/html/etc/alternatives/php /etc/alternatives/php
+ln -s /var/www/html/usr/bin/php /usr/bin/php
+ln -s /var/www/html/etc/php5 /etc/php5
+6. # Install mini_sendmail for chroot
+# We can use mini_sendmail for delivery emails directy in remote servers, but i prefer to control it in central mailserver for check spammers and limit it.
+cd /tmp/
+wget http://acme.com/software/mini_sendmail/mini_sendmail-1.3.6.tar.gz
+tar xzf mini_sendmail-1.3.6.tar.gz
+wget http://users1.leipzig.freifunk.net/%7Efirmware-build/brcm_2_4_Broadcom_default/build/openwrt_packages/mail/mini_sendmail/patches/200-fullname.patch
+patch -p0 < 200-fullname.patch
+cd mini_sendmail-1.3.6
+make
+# 2e555b2573c3ea65a467a5960f0b51f6  mini_sendmail
+mv /var/www/html/usr/lib/sendmail /var/www/html/usr/lib/sendmail_old
+mv /var/www/html/usr/sbin/sendmail /var/www/html/usr/sbin/sendmail_old
+cp mini_sendmail /var/www/html/usr/sbin/mini_sendmail
+cd /var/www/html/usr/lib/ && ln -s ../sbin/mini_sendmail sendmail
+cd /var/www/html/usr/sbin && ln -s mini_sendmail sendmail
+# ./mini_sendmail -h
+# usage:  ./mini_sendmail [-f<name>] [-t] [-s<server>] [-p<port>] [-T<timeout>] [-v] [address ...]
+#add to php.ini (/var/www/html/etc/php5/apache2/php.ini /var/www2/etc/php5/cli/php.ini /var/www2/etc/php5/cgi/php.ini line :672)
+# sendmail_path = /usr/sbin/mini_sendmail -t -i -fhosting@alojamientotecnico.com -s127.0.0.1
+sed -i -e 's#^;sendmail_path =$#sendmail_path = /usr/sbin/mini_sendmail -t -i -fhosting@alojamientotecnico.com -s127.0.0.1#' /var/www/html/etc/php5/apache2/php.ini /var/www/html/etc/php5/cli/php.ini /var/www/html/etc/php5/cgi/php.ini
+7. 
+# Test
+apache2ctl restart
+# php -i|grep --color sendmail
+#sendmail_from => no value => no value
+#sendmail_path => /usr/sbin/mini_sendmail -t -i -fhosting@alojamientotecnico.com -s127.0.0.1 => /usr/sbin/mini_sendmail -t -i -fhosting@alojamientotecnico.com -s127.0.0.1
+#Path to sendmail => /usr/sbin/mini_sendmail -t -i -fhosting@alojamientotecnico.com -s127.0.0.1
+# Sould be good idea check /var/www/html/usr/lib/sendmail /var/www/html/usr/sbin/sendmail and /var/www/html/usr/sbin/mini_sendmail with nagios alarm ;)
+8. Install ispconfig ........
+cd /tmp/
+svn co svn://svn.ispconfig.org/ispconfig3 svn.ispconfig.org
+mv /usr/local/ispconfig /var/www/html/usr/local/
+ln -s /var/www/html/usr/local/ispconfig /usr/local/ispconfig
+mv /var/www/apps /var/www/html/var/www/
+mv /var/www/php-fcgi-scripts /var/www/html/var/www/
+mv /var/www/ispconfig /var/www/html/var/www/
+ln -s /var/www/html//var/www/ispconfig /var/www/ispconfig
+ln -s /var/www/html/var/www/php-fcgi-scripts /var/www/php-fcgi-scripts
+ln -s /var/www/html/var/www/apps /var/www/apps
+# After copy, we must clean unnecessary users and groups
+cp -r /etc/{passwd,group,apt} /var/www/html/etc/
+apache2ctl stop
+apache2ctl start
+### Migration to other server ###
+Really easy:
+Do step 1
+And after do a simple rsync:
+screen
+time rsync -a --progress root@host1:/var/www/ /var/www/
+# Install some apache's dependencies
+apt-get install debootstrap libpcre3 libaprutil1 libxml2 mime-support
+Do step 5
+Do step 6
--- a/docs/under_development/DEV_CHROOTED_DEBIAN_5.0.txt
+++ b/docs/under_development/DEV_CHROOTED_DEBIAN_5.0.txt
+Setting up a chrooted ispconfig 3 installation
+--------------------------------------------------------------------
+# Follow the steps 1 - 8 of the INSTALL_DEBIAN_5.0 Guide, then proceed
+# with the steps below.
+# 
+# This guide is experimental as there are a few changes necessary in
+# ispconfig to get it working. These changes will be part of ISPConfig 3.0.2
+# Install packages
+apt-get install debootstrap libapache2-mod-chroot
+# Create the chroot environment
+debootstrap lenny /var/www/ ftp://ftp.fr.debian.org/debian/
+# Add mountpoints for the chroot env into the fstab file
+echo "/proc         /var/www/proc               proc           defaults        0       0">>/etc/fstab
+echo "devpts      /var/www/dev/pts            devpts         defaults        0       0">>/etc/fstab
+# mount all the filesystems
+mount -a
+# add a default chroot dir for all users of the sshusers group
+echo "@sshusers       -       chroot  /var/www/">>/etc/security/limits.conf
+# copy passwd and group files to the chroot env
+cp -rf /etc/apt /etc/passwd /etc/group /var/www/etc/ # Cleaning unnecessary users and groups
+# Create symlinks
+cd /var/www/var/
+rm -rf /var/www/var/www
+ln -s / www
+# Enter the chroot
+chroot /var/www
+# Update files in the chroot environment and install some packages.
+# You can ignore warnings about locales, we will fix them in the next step.
+apt-get update
+apt-get install fakeroot --force-yes -y
+apt-get install locales
+# Reconfigure locales. Select e.g the en_US* locales.
+dpkg-reconfigure locales
+# run a dist-upgrade
+fakeroot apt-get dist-upgrade
+# Install Apache and PHP in the chroot environment
+apt-get install apache2 apache2.2-common apache2-doc apache2-mpm-prefork apache2-utils libexpat1 ssl-cert libapache2-mod-php5 php5 php5-common php5-gd php5-mysql php5-imap phpmyadmin php5-cli php5-cgi libapache2-mod-fcgid apache2-suexec php-pear php-auth php5-mcrypt mcrypt php5-imagick imagemagick libapache2-mod-suphp libopenssl-ruby
+/etc/init.d/apache2 stop
+# Exit the chroot
+exit
+# Moving the apache configuration is not necessary, as Apache reads
+# the config files before it moves into the chroot
+# rm -rf /var/www/etc/apache2
+# mv -f /etc/apache2 /var/www/etc/
+# ln -s /var/www/etc/apache2 /etc/apache2
+rm -rf /var/www/etc/php5/cgi/
+mv -f /etc/php5/cgi/ /var/www/etc/php5/
+ln -s /var/www/etc/php5/cgi /etc/php5/
+rm -rf /var/www/etc/php5/apache2/
+mv -f /etc/php5/apache2/ /var/www/etc/php5/
+ln -s /var/www/etc/php5/apache2 /etc/php5/
+ln -s /var/www/var/run/apache2.pid /var/run/apache2.pid
+# enable mod_chroot
+a2enmod mod_chroot
+echo "ChrootDir /var/www" > /etc/apache2/conf.d/mod_chroot.conf
+# Start apache
+/etc/init.d/apache2 start
+# Install ISPConfig
+cd /tmp
+wget https://www.ispconfig.org/downloads/ISPConfig-3.0.1.4-beta-2.tar.gz
+tar xvfz ISPConfig-3.0.1.4-beta-2.tar.gz
+cd ispconfig3_install/install/
+php -q install.php
+cd /tmp/
+rm -rf ispconfig3_install
+rm -f ISPConfig-3.0.1.4-beta-2.tar.gz
+# Move the ispconfig interface part to the chroot environment and create a symlink
+mkdir /var/www/usr/local/ispconfig
+chown ispconfig:ispconfig /var/www/usr/local/ispconfig
+chmod 750 /var/www/usr/local/ispconfig
+mv /usr/local/ispconfig/interface /var/www/usr/local/ispconfig/
+ln -s /var/www/usr/local/ispconfig/interface /usr/local/ispconfig/interface
+chroot /var/www adduser www-data ispconfig
+# Create a link for the MySQL socket
+ln /var/run/mysqld/mysqld.sock /var/www/var/run/mysqld/mysqld.sock
+# As an alternative to making a hardlink to the MySQL socket, 
+# change the my.cnf file in the chroot to use TCP sockets.
+# This is more secure but a bit slower than using the mysqld.sock file.
+# Restart Apache
+/etc/init.d/apache2 restart
--- a/interface/web/designer/index.php
+++ b/interface/web/designer/index.php
No results found