INSTALL_CENTOS_5.2.txt 6.65 KiB
WARNING: Support for CentOS is experimental only. For production systems better use Debian or Ubuntu.
Installation
-----------
It is recommended to use a clean (fresh) CentOS 5.2 install. Then follow the steps below to setup your server with ISPConfig 3:
Installation of some basic requirements:
rpm --import /etc/pki/rpm-gpg/RPM-GPG-KEY*
yum update
yum groupinstall 'Development Tools'
yum groupinstall 'Development Libraries'
You should disable selinux now, as some programs will not start when selinux is enabled:
system-config-securitylevel-tui
then reboot the server.
1) Install Postfix, Courier, Saslauthd, MySQL, phpMyAdmin with the following command line (on one line!):
yum install ntp httpd mysql-server php php-mysql php-mbstring rpm-build gcc mysql-devel openssl-devel cyrus-sasl-devel pkgconfig zlib-devel phpMyAdmin pcre-devel openldap-devel postgresql-devel expect libtool-ltdl-devel openldap-servers libtool gdbm-devel pam-devel gamin-devel postfix
rpm --import http://dag.wieers.com/rpm/packages/RPM-GPG-KEY.dag.txt
cd /tmp
wget http://packages.sw.be/rpmforge-release/rpmforge-release-0.3.6-1.el5.rf.i386.rpm
rpm -i rpmforge-release-0.3.6-1.el5.rf.i386.rpm
yum update
yum install getmail
useradd -m -s /bin/bash compileuser
passwd compileuser
visudo
## Allow root to run any commands anywhere
root ALL=(ALL) ALL
compileuser ALL=(ALL) ALL
su compileuser
mkdir $HOME/rpm
mkdir $HOME/rpm/SOURCES
mkdir $HOME/rpm/SPECS
mkdir $HOME/rpm/BUILD
mkdir $HOME/rpm/SRPMS
mkdir $HOME/rpm/RPMS
mkdir $HOME/rpm/RPMS/i386
mkdir $HOME/rpm/RPMS/x86_64
echo "%_topdir $HOME/rpm" >> $HOME/.rpmmacros
wget http://prdownloads.sourceforge.net/courier/courier-authlib-0.61.0.tar.bz2
wget http://prdownloads.sourceforge.net/courier/courier-imap-4.4.1.tar.bz2
wget http://prdownloads.sourceforge.net/courier/maildrop-2.0.4.tar.bz2
sudo rpmbuild -ta courier-authlib-0.61.0.tar.bz2
sudo rpm -ivh /home/compileuser/rpm/RPMS/i386/courier-authlib-0.61.0-1.i386.rpm
sudo rpm -ivh /home/compileuser/rpm/RPMS/i386/courier-authlib-mysql-0.61.0-1.i386.rpm
sudo rpm -ivh /home/compileuser/rpm/RPMS/i386/courier-authlib-devel-0.61.0-1.i386.rpm
rpmbuild -ta courier-imap-4.4.1.tar.bz2
sudo rpm -ivh /home/compileuser/rpm/RPMS/i386/courier-imap-4.4.1-1.i386.rpm
sudo rpmbuild -ta maildrop-2.0.4.tar.bz2
sudo rpm -ivh /home/compileuser/rpm/RPMS/i386/maildrop-2.0.4-1.i386.rpm
exit
chkconfig --levels 235 mysqld on
/etc/init.d/mysqld start
chkconfig --levels 235 httpd on
/etc/init.d/httpd start
chkconfig --levels 235 courier-authlib on
/etc/init.d/courier-authlib start
chkconfig --levels 235 sendmail off
chkconfig --levels 235 postfix on
chkconfig --levels 235 saslauthd on
/etc/init.d/sendmail stop
/etc/init.d/postfix start
/etc/init.d/saslauthd start
chkconfig --levels 235 courier-imap on
/etc/init.d/courier-authlib restart
/etc/init.d/courier-imap restart
Set the mysql database password:
mysqladmin -u root password yourrootsqlpassword
mysqladmin -h ispconfig.local -u root password yourrootsqlpassword
2) Install Amavisd-new, Spamassassin and Clamav (1 line!):
yum install amavisd-new spamassassin clamav clamd clamav-data clamav-server clamav-update unzip bzip2 unrar
chkconfig --levels 235 amavisd on
chkconfig --levels 235 clamd on
/usr/bin/freshclam
/etc/init.d/amavisd start
/etc/init.d/clamd start
If you use the amavisd from rpmforge and not the one from centos, you will have to do these additional steps:
add the following line in /etc/sysconfig/amavisd:
CONFIG_FILE="/etc/amavisd/amavisd.conf
run:
mkdir /var/run/amavisd /var/spool/amavisd /var/spool/amavisd/tmp /var/spool/amavisd/db
chown amavis /var/run/amavisd /var/spool/amavisd /var/spool/amavisd/tmp /var/spool/amavisd/db
yum install perl-DBD-mysql
3) Install apache, PHP5 and phpmyadmin (1 line!):
yum install php php-devel php-gd php-imap php-ldap php-mysql php-odbc php-pear php-xml php-xmlrpc php-eaccelerator php-magickwand php-magpierss php-mapserver php-mbstring php-mcrypt php-mhash php-mssql php-shout php-snmp php-soap php-tidy curl curl-devel perl-libwww-perl ImageMagick libxml2 libxml2-devel phpmyadmin
4) Install pure-ftpd and quota
cd /tmp
wget http://centos.karan.org/el5/extras/testing/i386/RPMS/pure-ftpd-1.0.21-15.el5.kb.i386.rpmrpm -i pure-ftpd-1.0.21-15.el5.kb.i386.rpm
yum install quota
chkconfig --levels 235 pure-ftpd on
/etc/init.d/pure-ftpd start
5) Install mydns
wget http://mydns.bboy.net/download/mydns-mysql-1.1.0-1.i386.rpm
rpm -ivh mydns-mysql-1.1.0-1.i386.rpm
chkconfig --levels 235 mydns on
6) Install vlogger and webalizer
yum install webalizer perl-DateTime-Format-HTTP perl-DateTime-Format-Builder
cd /tmp
wget http://n0rp.chemlab.org/vlogger/vlogger-1.3.tar.gz
tar xvfz vlogger-1.3.tar.gz
mv vlogger-1.3/vlogger /usr/sbin/
rm -rf vlogger*
Edit the file /etc/sudoers
vi /etc/sudoers
and change the line:
Defaults requiretty
to:
# Defaults requiretty
7) Install ISPConfig 3
Disable the firewall:
system-config-securitylevel-tui
There are two possile scenarios, but not both:
7.1) Install the latest released version
7.2) Install directly from SVN
7.1) Installation of beta 3 from tar.gz
cd /tmp
wget http://www.ispconfig.org/downloads/ISPConfig-3.0.0.9-rc2.tar.gz
tar xvfz ISPConfig-3.0.0.9-rc2.tar.gz
cd ispconfig3_install/install/
7.2) Installation from SVN
yum install subversion
cd /tmp
svn export svn://svn.ispconfig.org/ispconfig3/trunk/
cd trunk/install
7.1+7.2) Now proceed with the ISPConfig installation.
Now start the installation process by executing:
php -q install.php
The installer will configure all services like postfix, sasl, courier, etc. for you. A manual setup as required for ISPConfig 2 (perfect setup guides) is not necessary. To login to the ISPConfig controlpanel, open the following URL in your browser (replace the IP to match your settings!):
http://192.168.0.100:8080/
the default login is:
user: admin
password: admin
In case you get a permission denied error from apache, please restart the apache webserver process.
Optional:
Install a webbased Email Client
yum install squirrelmail
----------------------------------------------------------------------------------------------------------
Hints:
debian 4.0 under openvz:
VPSID=101
for CAP in CHOWN DAC_READ_SEARCH SETGID SETUID NET_BIND_SERVICE NET_ADMIN SYS_CHROOT SYS_NICE CHOWN DAC_READ_SEARCH SETGID SETUID NET_BIND_SERVICE NET_ADMIN SYS_CHROOT SYS_NICE
do
vzctl set $VPSID --capability ${CAP}:on --save
done
----------------------------------------------------------------------------------------------------------
Installing Jailkit:
cd /tmp
wget http://olivier.sessink.nl/jailkit/jailkit-2.5.tar.gz
tar xvfz jailkit-2.5.tar.gz
cd jailkit-2.5
./configure
make
make install
rm -rf jailkit-2.5*